Normet Charmec MC605 DA(V) Long End Technical Information (5F719E7_1000) Index:

• 0. Contents
• 1. Technical Data Sheet
• 2. Operator’s Manual
  • Charmec MC 605 DA(V)
  • Contents
  • 1. Introduction
    • 1.1. Carrier
    • 1.2. Frame Structure
      • 1.2.1. Engine end Frame
      • 1.2.2. Load end Frame
      • 1.2.3. Oscillation
    • 1.3. Engine
      • 1.3.1. General
      • 1.3.2. Exhaust system
    • 1.4. Hydrodynamic Transmission
      • 1.4.1. General
      • 1.4.2. Torque Converter
      • 1.4.3. Transmission
      • 1.4.4. Transmission Controls
    • 1.5. Mechanical Transmission
      • 1.5.1. General
      • 1.5.2. Driveshafts
      • 1.5.3. Axle assemblies
    • 1.6. Hydraulics
      • 1.6.1. Pumps
      • 1.6.2. Brakes
      • 1.6.3. Steering
  • 2. Safety Rules
    • 2.1. General Safety Rules
    • 2.2. Operating Safety Rules
    • 2.3. Safety Labels
  • 3. Operator Controls
    • 3.1. Dashboard
      • 3.1.1. Switches
      • 3.1.2. NorSmart Control System
      • 3.1.3. Common Warning
    • 3.2. Engine Control System
    • 3.3. Main Switch
    • 3.4. Circuit Breakers
    • 3.5. Driving Controls
    • 3.6. Seat
    • 3.7. Emergency Stop
    • 3.8. Windshield Wipers
    • 3.9. Air Conditioning
  • 4. Operation and Use
    • 4.1. Commissioning On Delivery
    • 4.2. Daily Operation
      • 4.2.1. Daily Maintenance Operations
      • 4.2.2. Instrumentation Checks
      • 4.2.3. Testing the Brakes
    • 4.3. Driving The Carrier
      • 4.3.1. General
      • 4.3.2. Before Start
      • 4.3.3. Engine Start
      • 4.3.4. Gear Shifting
      • 4.3.5. Steering
      • 4.3.6. Setting the Carrier in Motion
      • 4.3.7. Driving on Slopes
      • 4.3.8. Road Driving
      • 4.3.9. Stopping
    • 4.4. Carrier Transfer
      • 4.4.1. Towing
      • 4.4.2. Lifting
      • 4.4.3. Lowering the Carrier Down a Mine
    • 4.5. Special Operating Conditions
      • 4.5.1. Winter Operation
      • 4.5.2. High Ambient Temperature, High Altitude
      • 4.5.3. Jump Start
      • 4.5.4. Cleaning Protective Treatment
  • Notes
• 3. NorSmart Control System
  • NorSmart Anfo
  • Index
  • 1. General
    • 1.1. Purpose of the system
    • 1.2. Warnings and notifications
    • 1.3. Definitions, terms and abbreviations used
  • 2. General description of the system
    • 2.1. Remote Display (RD)
    • 2.2. Multi Information Controller (MIC)
    • 2.3. Can Hub Module (HUB)
    • 2.4. Controller Module HCM2000
    • 2.5. Controller Module HCM3100
    • 2.6. Controller Module HCM3200
  • 3. User Interface
    • 3.1. Navigation in the user interface
    • 3.2. Adjusting values
    • 3.3. Access rights of the user interface
    • 3.4. Pop-up windows of the user interface
    • 3.5. User interface alerts
    • 3.6. Drive Display (1)
    • 3.7. Process display (2)
    • 3.8. Process control (3)
    • 3.9. Data Logging (4)
      • 3.9.1. Process log window (4.1)
      • 3.9.2. Alerts window (4.2)
      • 3.9.3. Platform operating hours (4.3)
      • 3.9.4. File transfer settings (4.4)
    • 3.10. Display settings window (5)
    • 3.11. Advanced settings window (6)
      • 3.11.1. Access level selection (6.1)
      • 3.11.2. Commercial options (6.2)
      • 3.11.3. Factory & default parameters (6.3)
      • 3.11.4. System versions and settings (6.4)
      • 3.11.5. System backup (6.5)
    • 3.12. Process maintenance (7)
      • 3.12.1. Calibrations (7.1)
      • 3.12.2. Process parameters (7.2)
      • 3.12.3. Feeder options & parameters (7.3)
    • 3.13. Vehicle maintenance window (8)
      • 3.13.1. Platform parameters (8.1)
      • 3.13.2. Pedal calibrations (8.2)
      • 3.13.3. Drive speed calibration (8.4)
    • 3.14. Boom maintenance window (9)
      • 3.14.1. Boom control parameters (9.1)
      • 3.14.2. Joystick calibrations (9.2)
    • 3.15. Diagnostics window (10)
      • 3.15.1. Module I/O diagnostics (10.1)
      • 3.15.2. Camera view (10.2)
      • 3.15.3. Support leg diagnostics (10.3)
      • 3.15.4. Measures (10.4)
      • 3.15.5. CAN diagnostics (10.5)
      • 3.15.6. Controller diagnostics (10.6)
  • 4. Functions
    • 4.1. Starting up the system
    • 4.2. System update
    • 4.3. System backup
    • 4.4. System backup restoration
    • 4.5. Changing the access level using a code or a login key
      • 4.5.1. Changing the access level using a code
      • 4.5.2. Changing the access level using a login key
  • 5. APPENDICES
    • APPENDIX 1. System alert and info texts
      • Table 1:
    • APPENDIX 2. I/O-errors
    • APPENDIX 3. ANFO system alert and info texts
    • APPENDIX 4. ANFO process start up enabling conditions
    • APPENDIX 5. Warning symbol explanations
• 4. Service Schedule
• 5. Maintenance Manual
  • Carrier
  • Contents
  • 1. Safety precautions
    • 1.1. Service
    • 1.2. Hydraulics
    • 1.3. Other precautions
  • 2. Oil samples
  • 3. Engine
    • 3.1. Lubricant Recommendations
      • 3.1.1. Service Products
      • 3.1.2. Diesel Fuels
      • 3.1.3. Fame Fuels
      • 3.1.4. Engine Oils
      • 3.1.5. Coolant
    • 3.2. General
    • 3.3. Procedures
      • 3.3.1. Daily or once per shift (10 h)
        • Check the engine oil level.
        • Check the fuel level.
        • Check the air cleaner.
        • Check the coolant level.
        • Check the fuel pre-filter
      • 3.3.2. Every 500 hours
        • Replace the engine oil filter.
        • Change the engine oil.
        • Check the battery and clean battery terminals.
        • Check the coolant additive concentration.
        • Clean catalytic exhaust gas purifier.
        • Check the poly -V-belt condition.
        • Adjust the valve clearance.*
      • 3.3.3. Every 1000 hours
        • Check the engine.
        • Check the lines and hoses.
        • Check the air cleaner intake pipe.
        • Replace the intake air cleaner filter.
        • Check the cooling and heating system.
      • 3.3.4. Every 1500 hours
        • Adjust the valve clearance.
        • Replace the fuel filter element.
        • Clean the fuel prefilter element. (OM904LA engine)
        • Replace the fuel pre-filter insert.
        • Change the coolant.
    • 3.4. Troubleshooting
  • 4. Powershift transmission
    • 4.1. Lubricant recommendations
    • 4.2. Procedures
      • 4.2.1. Daily or once per shift (10 hours)
        • Check the transmission oil level.
      • 4.2.2. Every 500 hours
        • Replace the transmission oil filter.
      • 4.2.3. Every 1000 hours
        • Change the transmission oil.
    • 4.3. Troubleshooting
      • 4.3.1. General
      • 4.3.2. Procedures
      • 4.3.3. Troubleshooting guide
  • 5. Mechanical transmission
    • 5.1. Lubricant Recommendations
    • 5.2. Procedures
      • 5.2.1. Daily or once per shift (10 hours)
        • Check the tyres visually.
      • 5.2.2. Weekly (50 hours)
        • Lubricate the propeller shaft greasing fittings.
        • Check tyre pressure and condition.
        • Check the drive line bolts.
      • 5.2.3. Every 125 hours
        • Check the axle differential oil level.
      • 5.2.4. Every 250 hours
        • Check the wheel nuts.
        • Check the axle planetary gear oil level.
      • 5.2.5. Every 500 hours
        • Check the brake plate wear.
        • Change the axle differential oil.
      • 5.2.6. Every 1000 hours
        • Change the axle planetary gear oil.
      • 5.2.7. As required
        • Air bleed the service brakes.
        • Air bleed the safety/parking brakes.
    • 5.3. Troubleshooting
  • 6. Hydraulic system
    • 6.1. Lubricant Recommendations
    • 6.2. Pressure accumulator safety precautions
    • 6.3. Procedures
      • 6.3.1. Daily or once per shift (10 hours)
        • Check the hydraulic fluid level.
        • Check there are no leaking or hanging hoses.
      • 6.3.2. Every 500 hours
        • Check the pressure accumulators
        • Replace the hydraulic return fluid filter.
        • Change the hydraulic fluid.
      • 6.3.3. Every 1000 hours
        • Accumulator gas pressure test.
      • 6.3.4. As required maintenance
        • Check the steering hydraulic pressure.
        • Check and adjust the charging pressure.
        • Check the service brake pressure.
        • Check and adjust the safety/parking brake pressure.
    • 6.4. Troubleshooting
      • 6.4.1. Steering
      • 6.4.2. Service brakes
      • 6.4.3. Safety/parking brakes
  • 7. Frame
    • 7.1. Lubricant Recommendations
    • 7.2. Procedures
      • 7.2.1. Weekly (50 hours)
        • Lubricate the carrier greasing fittings.
      • 7.2.2. Every 1,000 hours
        • Check the oscillation axle bushings.
        • Check the frame joint bearings.
        • Check the steering cylinder joint pin, pin locking and bearing.
  • 8. Enclosed Cabin Equipments
    • 8.1. Procedures
      • 8.1.1. Daily or once in shift (10 hours)
        • Fill up the windshield washer reservoir.
      • 8.1.2. Every 500 hours
        • Change or clean the cabin fresh air filter weave.
      • 8.1.3. Every 2 years
        • Change the air conditioning system dryer.
      • 8.1.4. As required maintenance
        • Ensure efficient operation of the air conditioning:
• 6. Mobile Elevating Work Platform
• 7. ANFO Charging Module
• 8. Safety Instructions
• 9. ADM2 Engine Fault Codes
• 10. Fuel System
• 11. Lincoln
• 12. Portable Fire Extinguisher
• 13. Declaration of conformity
• 14. Schemas 18.06.2015