Normet Charmec 1614B Technical Information (5F7C795_1000) Index:

• 0. Contents
• 1. Technical Information
• 2. Operator’s Manual
  • Charmec 1614 B
  • Contents
  • 1. Introduction
    • 1.1. Carrier
    • 1.2. Carrier identification
    • 1.3. Frame Structure
      • 1.3.1. Engine end Frame
      • 1.3.2. Load end Frame
      • 1.3.3. Oscillation
    • 1.4. Engine
      • 1.4.1. General
      • 1.4.2. Exhaust system
    • 1.5. Hydrodynamic Transmission
      • 1.5.1. General
      • 1.5.2. Torque Converter
      • 1.5.3. Transmission
      • 1.5.4. Transmission Controls
    • 1.6. Mechanical Transmission
      • 1.6.1. General
      • 1.6.2. Driveshafts
      • 1.6.3. Axle assemblies
    • 1.7. Hydraulics
      • 1.7.1. Pumps
      • 1.7.2. Brakes
      • 1.7.3. Steering
  • 2. Safety Rules
    • 2.1. General Safety Rules
    • 2.2. Operating Safety Rules
    • 2.3. Maximum inclination angles
      • 2.3.1. Driving
      • 2.3.2. Operating the boom
    • 2.4. Safety Labels
  • 3. Operator Controls
    • 3.1. Dashboard
      • 3.1.1. Switches
      • 3.1.2. Indicator lamps
      • 3.1.3. Gauges
    • 3.2. Engine Control System
      • 3.2.1. General
      • 3.2.2. Diagnostic device – diagnostic socket
    • 3.3. Main Switch
    • 3.4. Circuit Breakers
    • 3.5. Driving Controls
    • 3.6. Seat
    • 3.7. Emergency Stop
    • 3.8. Specific features
  • 4. Operation and Use
    • 4.1. Commissioning On Delivery
    • 4.2. Daily Operation
      • 4.2.1. Daily Maintenance Operations
      • 4.2.2. Instrumentation Checks
      • 4.2.3. Testing the Brakes
    • 4.3. Driving The Carrier
      • 4.3.1. General
      • 4.3.2. Before Start
      • 4.3.3. Engine Start
      • 4.3.4. Gear Shifting
      • 4.3.5. Steering
      • 4.3.6. Setting the Carrier in Motion
      • 4.3.7. Driving on Slopes
      • 4.3.8. Road Driving
      • 4.3.9. Stopping
    • 4.4. Carrier Transfer
      • 4.4.1. Towing
      • 4.4.2. Lifting
      • 4.4.3. Lowering the Carrier Down a Mine
    • 4.5. Special Operating Conditions
      • 4.5.1. Winter Operation
      • 4.5.2. High Ambient Temperature, High Altitude
      • 4.5.3. Jump Start
      • 4.5.4. Cleaning Protective Treatment
  • Notes
• 3. Lubrication and Maintenance Schedule
• 4. Lubrication Manual
• 5. Maintenance Manual
• 6. Mobile Elevating Work Platform
  • Mobile Elevating Work Platform
  • Contents
  • 1. Foreword
  • 2. Introduction
    • 2.1. General
    • 2.2. Boom
    • 2.3. Work platform
    • 2.4. Dimensioned drawing
  • 3. Safety instructions
    • 3.1. General
    • 3.2. Operation
    • 3.3. Maintenance
    • 3.4. Emergency stop
    • 3.5. In Case Of Danger
    • 3.6. Environment
  • 4. Instructions for the owner and operator
    • 4.1. Operator Suitability
    • 4.2. Responsibility
  • 5. Operator’s controls
    • 5.1. Work platform controls
    • 5.2. Lower controls
    • 5.3. Terminal box TB3
    • 5.4. Work platform terminal box TB4
    • 5.5. Alarm unit
    • 5.6. Safety canopy locking
  • 6. Operation
    • 6.1. Preparations
    • 6.2. Use of the MEWP
    • 6.3. Daily checks
    • 6.4. Operation definitions
    • 6.5. Safety harness
    • 6.6. Extreme conditions
  • 7. Transport and storage
    • 7.1. Driving
    • 7.2. Storage
    • 7.3. Lifting
    • 7.4. Commissioning on delivery
  • 8. Maintenance
    • 8.1. General
    • 8.2. Greasing
    • 8.3. Schedule
    • 8.4. Maintenance items
      • 8.4.1. Daily or once in shift (10 hours)
        • Visually check the hydraulic hoses, couplings and the structure.
        • Check the tilting cylinder pin and work platform joint pin.
        • Keep the working area of the work platform clean.
        • Check the lubricator drippage amount and oil level.
        • Check the boom limit switch
      • 8.4.2. Weekly (50 hours)
        • Lubricate the grease fittings.
        • Check the boom mounting attachment.
        • Inspect the hydraulic cylinder, cylinder joint pin, pin locking and bearing.
      • 8.4.3. Every 250 hours
        • Check the boom extension clearance.
      • 8.4.4. Every 500 hours
        • Check the hydraulic pressures.
        • Inspect the turning joint lug welding.
        • Inspect the tilt cylinder fixing lug welding.
        • Inspect the condition of the boom beams.
        • Inspect the function of the load-lowering valve.
        • Inspect the boom mounting bolt connections.
      • 8.4.5. Every 1000 hours
        • Accumulator gas pressure test.
      • 8.4.6. Every 2000 hours
        • Change the tilting cylinder joint pin and bearing.
      • 8.4.7. Every 6000 hours
        • Change the tilting cylinder.
      • 8.4.8. When necessary
        • Adjust the boom lowering speed.
        • Adjust the boom slewing speed.
        • Adjust the load sensing system
  • 9. Specification
    • 9.1. Speed values
    • 9.2. Sticker
      • 9.2.1. General instructions
      • 9.2.2. Daily checks
  • 10. Troubleshooting
• 7. Anfo Charging Module
  • Operation and maintenance
  • Contents
  • 1. Technical information
    • 1.1. Foreword
    • 1.2. Technical Specification
    • 1.3. ANFO
  • 2. Charging Technique
    • 2.1. Pneumatic Loaders
    • 2.2. Charging Carrier
    • 2.3. Mobile Elevating Work Platform
    • 2.4. Compressed Air
    • 2.5. Charging The Round
    • 2.6. Smooth Wall Blasting
  • 3. Safety Aspects
    • 3.1. Static Electricity
    • 3.2. Electrical Hazards
    • 3.3. Chemical Reaction
  • 4. Operational Safety Rules
    • 4.1. General Instructions
    • 4.2. Work Instructions
  • 5. Operator Controls
    • 5.1. Charging Hand Valve
    • 5.2. Charging Pedal
    • 5.3. Selecting the Pressure Vessel
    • 5.4. Emergency stop
    • 5.5. Hose Connections
  • 6. Filling The Vessels
    • 6.1. Procedure
  • 7. Preparatory Tasks
    • 7.1. Adjustments
    • 7.2. Charging Start-up
  • 8. Blowing
    • 8.1. Borehole Cleaning
  • 9. Charging
    • 9.1. Charging The Borehole
    • 9.2. Charging Faults
  • 10. Maintenance Safety Rules
    • 10.1. Hot Work During Maintenance
    • 10.2. Fire Prevention Measures
    • 10.3. General Instructions
    • 10.4. Maintenance Instructions
  • 11. Maintenance
    • 11.1. General
    • 11.2. Maintenance Schedule
      • 11.2.1. Daily or once per shift (10 hours)
        • Drain water from the modular type air filter.
        • Drain water from the water separator.
        • Check the lubricator drippage amount and oil level.
        • Keep the pressure vessel and charging unit clean.
        • Check the interior and exterior condition of the vessel.
        • Check the wear of the charging hose.
        • Check total resistance of the carrier.
        • Check the resistance between earthing strap and ANFO charger quick acting coupling.
      • 11.2.2. Every 500 Hours
        • Clean the modular type air filter element.
        • Measure the earthing strap resistance.
      • 11.2.3. As Required
        • Change the water separator filter element
        • Fix the connections of the earthing straps and earthing points.
        • Replace the earthing straps.
• 8. Safety Instructions
• 9. ADM2 Engine Fault Codes
• 10. Fuel System
• 11. Monitor Brigade
• 12. Portable Fire Extinguisher
• 13. Wheels
• 14. Declaration of Conformity
• 15. Schemas