Takeuchi TB260 Mini Excavator Operators Manual (AQ0E019)

Format: PDF (Printable Document)

File Language: English

File Pages: 349

File Size: 39.58 MB (Speed Download Link)

Brand: Takeuchi

Model: TB260 Mini Excavator

Book No: AQ0E019

Serial No: 126100003-

Type of Document: Operators Manual

Categories: PDF, Takeuchi PDF

$ 40

Takeuchi TB260 Mini Excavator Operators Manual (AQ0E019)

Takeuchi TB260 Mini Excavator Operators Manual (AQ0E019) (SN 126100003-)

On a TB260 that’s digging footings, trenching services or loading trucks all day on uneven ground, this operators manual is what I keep handy to run the machine the way it was meant to be run. It walks you through what each control does, how the machine should feel under load, and the daily checks that prevent downtime. If, for example, the boom feels jerky when you’re trimming a grade near a foundation, this book helps you verify operating modes, inspect for simple operator‑level issues, and adjust your technique before calling in a bigger repair.

Applications & Use Cases

Set up the TB260 correctly when you first get to site, including warm‑up habits and basic walk‑around checks.
Understand control response so you can trench along fences or utilities without fighting the hydraulics.
Adjust operating practices on slopes or soft ground to keep the machine stable and avoid track or swing bearing abuse.
Confirm proper shutdown and parking so the machine is secure and ready for the next shift.
Train new operators on real‑world behaviors: swing clearance, load awareness, and avoiding sudden movements.

FAQ

Q: Can I keep this manual on a tablet in the cab?

A: Yes, it’s practical to use a digital copy; just make sure the screen is readable in sunlight and protected from vibration and dust.

Q: Is it worth printing sections of this manual?

A: Printing the daily checks, control layouts, and basic operating tips is handy for laminating and keeping right in the cab or tool trailer.

Safety Note

Always follow the manual’s operating and inspection guidance before working near people, traffic, trenches, or overhead hazards.

📘 Show Index

Takeuchi TB260 Mini Excavator Index:

Cover
Safety alert symbol
- Signal words
- Introduction
  - Foreword
  - Manual storage compartment
  - Serial numbers
- Machine description
  - Front, rear, left and right
  - Designated operations
  - Features
  - Break-in period
- Notes on reading this manual
Safety
- General precautions
- Precautions when preparing
- Precautions when starting
- Precautions when operating
- Precautions when stopping
- Precautions when transporting
- Precautions on maintenance
- Safety signs (decals)
Controls
- Names of components (Canopy)
- Names of components (Cab)
- Covers
  - Starter key
  - Right side cover
  - Engine hood
  - Left side cover
  - Fuel lid
  - Fuel filler port
  - Fuse box cover
- Cab
  - Cab door
  - Emergency exit
  - Front window
  - Lower front window
  - Side window
  - Emergency hammer (optional)
  - Sun shade
- Seat and seat belt
  - Seat
  - Seat belt
- Multi-information display
  - Main Menu screen
  - Warning lamps
  - Indicators
  - Screen control key
  - Screen navigation
  - Screen navigation
  - Switching images
- Instrument cluster
  - Warning lamps
  - Indicators
  - Meters
  - Multi-data display
- Switches
  - Starter switch
  - Engine shutdown switch <Applicable machine models 126100003 or later>
  - Throttle controller
  - Horn button
  - Deceleration button
  - Travel speed button
  - Auxiliary 1st switches
  - Auxiliary 2nd/4th switch (If equipped)
  - Third auxiliary hydraulic switch and button (If equipped)
  - Auxiliary 2/4 select button (If equipped)
  - Third auxiliary hard-lock switch (if equipped)
  - DPF manual regeneration/inhibit select switch <Applicable machine models 126100003 or later>
  - Light switch
  - Wiper switch
  - Washer switch
  - Automatic deceleration switch
  - Power/Highland mode switch
  - Detent mode switch (Auxiliary 1st) (If equipped)
  - Auxiliary 1st auto tank switch (If equipped)
  - Lift overload warning switch (If equipped)
  - Beacon lamp switch (If equipped)
- Levers and Pedals
  - Safety lock lever
  - Operating levers
  - Blade lever
  - Travel levers/pedals
  - Boom swing pedal
- Accessories
  - Air conditioner (If equipped)
  - Cup holder
  - Ashtray
  - Power supply socket
  - Interior light
  - Mirrors
  - External power sockets
  - Radio
  - Radio (Bluetooth equipped)
  - Auxiliary hydraulic lines (If equipped)
  - Operating the machine with an accumulator
  - Load safety device (If equipped)
  - Fuel supply pump (If equipped)
  - Engine auto stop
Operation
- Before starting operation
  - Getting on or off the machine
  - Walk-around inspection
  - Daily inspection
- Starting and stopping the engine
  - Before starting the engine
  - Starting the Engine
  - Warming up the engine
  - Stopping the engine
- Operating the machine
  - Lever pattern (ISO pattern)
  - Lever pattern (G pattern) (If equipped)
  - Warming up the machine (hydraulic oil)
  - Inspection after warm-up
  - Operating the travel levers/pedals
  - Stopping travel
  - Operating the working equipment
- Operating procedures
  - Prohibited operations
  - Cautions on operating
  - Cautions on traveling on slopes
  - Getting out of mud
  - Operations possible with this machine
- Parking the machine
  - Parking
  - Inspection and checks after stopping the engine
- Handling in cold climates
  - Preparing for cold climates
  - Cautions after operations
  - After the cold climate
- Handling rubber crawlers
  - Prohibitions
  - Cautions
  - Preventing the rubber crawlers from coming off
Transport
- Loading and unloading
- Hoisting the machine
- Securing the machine
Maintenance
- General
  - Maintenance overview
  - Cautions on maintenance
- Service data
  - Fuel and lubricant table
  - Regularly replace the hydraulic oil
  - List of consumables
  - List of tools (If equipped)
  - List of tightening torques
- Safety-critical parts
- Maintenance list
- Walk-around inspection
  - Inspecting by opening the engine hood and covers
  - Inspecting by walking around the machine
  - Inspecting while sitting in the operator’s seat
- Daily inspection (every 10 hours)
  - Inspecting and replenishing the coolant
  - Inspecting and replenishing the engine oil
  - Inspecting the water separator
  - Inspecting the fuel level
  - Inspecting the hydraulic oil tank level and replenishing
  - Lubricating the working equipment
- After the initial 50 hours (only for new machines)
  - Inspecting and adjusting the fan belt
  - Inspecting and adjusting the compressor belt (AC)
- Every 50 hours
  - Inspecting and adjusting the crawler tension
  - Lubricating the slew bearing
  - Draining the water from the fuel tank
  - Inspecting the battery fluid level and replenishing
- Every 100 hours
  - Cleaning the water separator <Applicable machine models 126000002 or later>
- After the initial 250 hours (only for new machines)
  - Replacing the hydraulic oil return filter
  - Replacing the pilot line filter
  - Replacing the travel motor gear oil
- Every 250 hours
  - Inspecting and adjusting the fan belt
  - Inspecting and adjusting the compressor belt (AC)
  - Replacing the engine oil and the oil filter <Applicable machine models 126000002 or later>
  - Cleaning the air cleaner
  - Cleaning the radiator fins and the oil cooler fins
  - Cleaning the air filters (AC)
  - Cleaning the condenser (AC)
  - Inspecting the refrigerant (gas) level (AC)
- Every 500 hours
  - Replacing the engine oil and the oil filter <Applicable machine models 126100003 or later>
  - Replacing the fuel filter
  - Replacing the water separator filter
  - Inspecting the slew pinion gear
- Every 1000 hours
  - Replacing the hydraulic oil return filter
  - Replacing the pilot line filter
  - Replacing the travel motor gear oil
  - Replacing the air cleaner element
  - Replacing the air breather filter
  - Inspecting and adjusting the engine valve clearance
- Every 1500 hours
  - Inspecting, cleaning and checking operation of the engine fuel injectors <Applicable machine models 126000002 or later>
  - Inspecting the crankcase breather system
  - Cleaning the EGR cooler (cleaning the water side and exhaust air passage blower) <Applicable machine models 126100003 or later>
- Every 2000 hours
  - Cleaning the engine cooling system
  - Lapping the engine valve seats
- Every 3000 hours
  - Inspecting the turbocharger (blow wash as necessary)
  - Inspecting, cleaning and checking operation of the EGR valve <Applicable machine models 126100003 or later>
  - Cleaning the EGR lead valve <Applicable machine models 126100003 or later>
  - Inspecting the operation of the air intake throttle valve
  - Inspecting and cleaning the injector <Applicable machine models 126100003 or later>
- Every 4000 hours
  - Replacing the hydraulic oil and cleaning the suction strainer
- When required
  - Replacing the bucket teeth and the side cutters
  - Replacing the bucket
  - Adjusting the gap between the bucket and arm (If equipped)
  - Inspecting and replenishing the windshield washer fluid
  - Draining the water from the water separator
  - Lubricating the levers and pedals
  - Inspecting the rubber crawlers
  - Replacing the rubber crawlers
  - Inspecting and cleaning the DPF soot filter <Applicable machine models 126100003 or later>
- Every 2 years
  - Replacing the receiver dryer
- Maintenance during extended storage period
Troubleshooting
- Symptoms that are not malfunctions
- If the engine overheats
- If the battery goes dead
- If a fuse blows
  - Inspecting and replacing the fuse
  - Inspecting the fusible link
- Restarting after adding fuel
  - Bleeding air from the fuel system
- If a warning lamp flashes
- Vehicle error code list
- Engine error code list
- Other symptoms
- Lowering the boom to the ground
- Towing
- If the cab or canopy is damaged
Specifications
- Basic Specifications
- Machine dimensions
- Operating ranges
- Lifting Capacities
Options
- General precautions
  - Safety precautions
  - Cautions when installing attachments
  - Cautions when operating attachments
- Attachment combination table
- Selecting a lever pattern
  - Switching the lever pattern
- Hydraulic breaker
  - Cautions on operating
  - Replacing the hydraulic oil regularly
- Travel alarm
- Optional equipment mass
- Biodegradable oil
  - Replacing the hydraulic oil with biodegradable oil
- Cab options
- Angle dozer blade <Applicable machine models 126100003 or later>
  - Specifications
- Operating lever switch kit 1
  - Horn button
  - Deceleration button
  - Travel speed button
  - Auxiliary 1st switches
  - Auxiliary 2nd/4th switch
  - Auxiliary 2/4 select button
- Takeuchi Security System
  - Starter key
  - Starting the engine
  - Registering and deleting the starter key
  - If the master key is lost
  - Countries where the system can be used