CNH BOOM WORK LED LIGHTS 9M, 29.5FT Installation Instructions (92252998)

Out on jobsites, these machines are working in mud, dust, rain, and usually after dark when you’re trying to finish a pour or load out trucks. This installation manual is about getting those CNH boom work LED lights mounted, routed, and wired so they actually help you see, not flicker or fill with water. Say you’re trying to light up the end of a telehandler boom for night lifts—this guide walks you through how to trace the harness, mount the lights, and test them before you send anyone under the load.

Applications & Use Cases

• Trace existing wiring and verify power and ground points so you don’t tap into the wrong circuit or overload anything.
• Check mounting locations, then inspect brackets and hardware so the lights stay aligned when the boom’s fully extended.
• Route and secure the harness along the boom, isolating it from pinch points and sharp edges that typically chew through insulation.
• Test the system step‑by‑step, then aim and align the LEDs so your work area’s lit, not the neighbor’s field.
• Use it to troubleshoot later—when a light won’t fire, you can retrace the install and bleed down guesswork.

FAQ

Q: Is this a PDF I can search on my laptop or phone?

A: Yes, it’s typically a standard PDF, so you can keyword search wiring steps or diagrams on most devices.

Q: Can I print just the wiring or mounting pages for the jobsite?

A: You usually can; most folks print the key pages, stick them in a clear sleeve, and keep them with the machine.

Safety Note

Always isolate power and verify the boom is safely supported and locked out before you start routing or inspecting any wiring on it.

CNH BOOM WORK LED LIGHTS 9M, 29.5FT Index:

1 SAFETY INFORMATION
Basic instructions – Important notice regarding equipment servicing. . . . . . . . . . . . . . . . . . . . . . . 1-1
Advice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Safety rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
2 KIT CONTENT
Kit overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
3 GENERAL INFORMATION
Basic instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
4 PRE-ASSEMBLY
PREPARING FOR ASSEMBLY
Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
5 ASSEMBLY
Install
Boom Work light – Install. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

CNH

92252933 – BOOM WORK LED LIGHTS 9 M (29.5 FT)
NEW HOLLAND
TH9.35 ELITE UPLIFT Telescopic handler
9 m (29.5 ft), 108 kW (145 Hp) Stage V
[FNHZE935NPKF03555 – ]
TH9.35 ELITE UPLIFT Telescopic handler
9 m (29.5 ft), 108 kW (145 Hp) Stage V
[FNHZE935NPKF03555 – ]
TH9.35 ELITE UPLIFT Telescopic handler
9 m (29.5 ft), 108 kW (145 Hp) Stage V
[FNHZE935NPKF03555 – ]
TH9.35 ELITE UPLIFT Telescopic handler
9 m (29.5 ft), 108 kW (145 Hp) Stage V
[FNHZE935NPKF03555 – ]
TH9.35 ELITE UPLIFT Telescopic handler
9 m (29.5 ft), 108 kW (145 Hp) Stage V
[FNHZE935NPKF03555 – ]
TH9.35 PLUS UPLIFT Telescopic handler
9 m (29.5 ft), 99 kW (133 Hp) Stage V
[FNHZG935NPKF04177 – ]
TH9.35 PLUS UPLIFT Telescopic handler
9 m (29.5 ft), 99 kW (133 Hp) Stage V
[FNHZG935NPKF04177 – ]
TH9.35 PLUS UPLIFT Telescopic handler
9 m (29.5 ft), 99 kW (133 Hp) Stage V
[FNHZG935NPKF04177 – ]
TH9.35 PLUS UPLIFT Telescopic handler
9 m (29.5 ft), 99 kW (133 Hp) Stage V
[FNHZG935NPKF04177 – ]
TH9.35 PLUS UPLIFT Telescopic handler
9 m (29.5 ft), 99 kW (133 Hp) Stage V
[FNHZG935NPKF04177 – ]
TH9.35 PLUS UPLIFT Telescopic handler
9 m (29.5 ft), 99 kW (133 Hp) Stage V – NA
[FNHZG935NRKH04667 – ]
Lec