CNH OPTION LINE SHORT ARM Installation Instructions (91834114)

Out in the yard or on a jobsite, this arm kit’s usually going on loaders, backhoes, or similar CNH machines that spend their lives in dirt, mud, and tight spots. This installation manual walks you through how to remove the old arm, align the new short arm, and get everything routed and torqued so it’ll work like it should. Picture this: you’ve got a worn or bent arm, pins are sloppy, bucket won’t sit right—this guide helps you trace what needs to come off, test-fit the new parts, and verify the geometry before you go back to digging.

Applications & Use Cases

• Trace and isolate the correct mounting points so you don’t start pulling pins and hoses you don’t need to touch.
• Check and inspect bushings, pins, and shims while you’re in there, so you don’t reinstall worn hardware.
• Align the new short arm, then verify pin fit and movement before you fully secure anything.
• Route hoses, guards, and grease lines so they won’t rub, pinch, or get torn during normal swing.
• Test the machine movement after install and bleed any affected hydraulic lines if the procedure calls for it.

FAQ

Q: Is this a PDF I can search on my laptop or phone?

A: It’s typically a standard PDF, so you can search terms, zoom in on diagrams, and keep it open while you work.

Q: Can I print just the pages I need to take out to the machine?

A: Yeah, most folks print the key steps and torque charts, stick them in a sleeve, and keep the full file saved for reference.

Safety Note

Always support the boom and arm mechanically before pulling pins or hardware so nothing can drop or swing unexpectedly.

CNH OPTION LINE SHORT ARM Index:

1 SAFETY INFORMATION
Basic instructions – Important notice regarding equipment servicing. . . . . . . . . . . . . . . . . . . . . . . 1-1
2 KIT CONTENT
Kit content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
3 GENERAL INFORMATION
General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
4 PRE-ASSEMBLY
PREPARING FOR ASSEMBLY
Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
5 ASSEMBLY
OPTION LINE (FOR ARM WITH SEATING) – SHORT ARM
Short arm seating installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
Option line (for arm with seating) – Short arm line installation. . . . . . . . . . . . . . . . . . . . . . 5-3

CNH

KG1NP601-00 – OPTION LINE (SHORT ARM)
CASE CONSTRUCTION
CX130D LC LATAM Market
CX130D STD TR Market
[DCH130D7NPE7D1102 –
DCH130D7NRE7D1182]
CX130D STD TR Market
[DCH130D7NSE7V2001 – ]
CX130D STD W/BLADE TR
Market [DCH130D7NNEGD1001 –
DCH130D7NRE7D1189]
CX130D STD W/BLADE TR Market
[DCH130D7NSE7V2001 – ]
CX130E LC EU Market
[DCH130R8NME8D1001 –
DCH130R8NRE8D1999]
CX130E LC EU Market
[DCH130R8NSE8D2001 – ]
CX130E STD W/BLADE EU
Market [DCH130R8NNE8D1101 –
DCH130R8NRE8D1999]
CX130E STD W/BLADE EU Market
[DCH130R8NSE8D2001 – ]
CX140E LC NA Market
[DAC140K8NNS8D1101 – ]
CX140E STD W/BLADE NA Market
[DAC140K8NNS8D1103 – ]
NEW HOLLAND CONSTRUCTION
E145D LC LATAM Market
San