CNH FLOAT BLADE KIT Installation Instructions (92778221)

Out in the dirt, these machines are grading pads, cutting ditches, and cleaning up around job sites where things are never quite level and the ground’s usually rough. This CNH FLOAT BLADE KIT installation manual walks you through how to mount, route, and align the kit so the blade can float like it’s supposed to, instead of fighting the ground. Say you’ve got a machine that’s gouging when you back-drag; with this, you can trace the mounting points, check clearances, install the hardware, and verify the blade actually floats before you send it back out.

Applications & Use Cases

• Trace and inspect mounting locations so you’re not drilling or cutting where you don’t need to.
• Route hoses and hardware the way CNH intended, then check for pinch points before you tighten everything down.
• Isolate a bad install by following the step order, so you can test each bracket or linkage instead of guessing.
• Verify blade float function after install with simple checks, so you know it’ll follow the ground and not chatter.
• Use it to bleed any related hydraulics correctly when the kit ties into existing circuits on most models.

FAQ

Q: Is this a PDF I can search on my laptop or phone?

A: It’s usually a standard PDF, so you can keyword search and zoom in on diagrams without any fancy software.

Q: Can I print just the pages I need for the shop?

A: Yeah, you can typically print selected pages, toss them in a sleeve, and keep them by the machine while you work.

Safety Note

Always support the blade and lock out the machine before you get under anything to align or tighten the float kit components.

CNH FLOAT BLADE KIT Index:

1 SAFETY INFORMATION
Basic instructions – Important notice regarding equipment servicing. . . . . . . . . . . . . . . . . . . . . . . 1-1
Advice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Safety rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
2 KIT CONTENT
Kit overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
3 GENERAL INFORMATION
Basic instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
4 PRE-ASSEMBLY
PREPARING FOR ASSEMBLY
Dozer blade – Prepare . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
5 ASSEMBLY
Install
Install . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

CNH

92286866 – FLOAT BLADE KIT
CASE CONSTRUCTION
856D Mechanical Controls, Stage V
– ZF EC4 Transmission Control Unit
[FNH856D0NZHF01814 – ]
856D AWD Mechanical Controls, Stage
V – ZF EC4 Transmission Control Unit
[FNH856DANZHF01827 – ]
Lec