Develon DD130 Dozer Shop Manual (950106-03068_B_EN)

Out in the cut or on a muddy site, that DD130 is usually pushing fill, cutting grades, and working in places where you can’t just roll it into a dealership every time something feels off. This shop manual is what you’d use when you’re ready to strip things down past simple filters and fluids and actually trace a fault, tear in, and put it back together right. Say you’ve got a final drive howling and metal on the drain plug—this is what helps you plan the teardown, inspect the guts, and reassemble it without leaving a shim out or misaligning a bearing.

Applications & Use Cases

• Plan a major teardown by laying out your workspace so you can route hoses, bag hardware, and keep left/right parts from getting mixed.
• Trace a drivetrain or steering issue, then inspect wear points while it’s apart so you don’t have to open it up again next month.
• Follow general torque sequences so you tighten cases, housings, and frames evenly and don’t warp anything.
• Verify undercarriage, blade, and linkage alignment during reassembly so pins, shims, and spacers all seat like they should.
• Test and bleed hydraulic circuits after repairs so you can isolate any remaining air or internal leaks before sending it back to work.

FAQ

Q: Is this a PDF I can search on my laptop or phone?

A: Yes, it’s typically a searchable PDF, so you can jump straight to the system you’re working on instead of scrolling forever.

Q: Can I print pages to take to the machine without ruining the whole manual?

A: You usually can; most folks print just the sections they need, stick them in plastic sleeves, and keep the full file clean on a computer.

Safety Note

Always support the dozer with rated stands and properly blocked attachments before you crawl under it or start loosening anything heavy.

Develon DD130 Dozer Index:

• Safety, Specification and Systems Operation
  • Dozer Maintenance Safety
    • Safety Instructions
    • General
    • Long Term Storage
    • Maintenance
    • Environment and Circumstances
  • General Specifications
    • Safety Instructions
    • General
    • Standard Specification
    • Performance Tests
    • Preparation for Performance Tests
    • Operational Performance Standard Table
  • Engine Specifications
    • Safety Instructions
    • Engine Specification
    • Engine Performance Curves
    • Tightening Torques
  • Hydraulic Systems and Structure Specifications
    • Safety Instructions
    • Hydraulic System
    • Travel System
  • General Maintenance Instructions
    • Safety Instructions
    • Welding Precautions and Instructions
    • Hydraulic System – General Precautions
    • Maintenance Service and Repair Procedure
    • Hydraulic System Cleanliness and Oil Leaks
    • Cleaning and Inspection
  • Standard Torques
    • Safety Instructions
    • Torque Values for Standard U.S. Fasteners
    • Type 8 Phosphate Coated Hardware
    • Torque Values for Hose Clamps
    • ORFS Swivel Nut Recommended Torque
    • Torque Values for Split Flanges
    • Torque Wrench Extension Tools
    • Loctite Applications
  • Engine
    • Safety Instructions
    • General Information
    • Tightening Torque
    • Actuating System
    • Lubricant System
    • Fuel System
    • Cooling System
    • Air Inlet and Exhaust System
    • Electrical System
  • Components Operation, Description and Inspection
    • Safety Instructions
    • Overview
    • Main Pump
    • Main Control Valve
    • HST Pump
    • HST Motor
    • Fan Pump
    • Travel Device
  • Systems Operation and Description
    • Safety Instructions
    • Gauge Panel system
    • EPOS Function Description
    • 2D MC Calibration
    • Air Conditioner System
    • Refrigerant System Repairs
    • Troubleshooting
• Removal and Installation
  • Engine
    • Safety Instructions
    • Before Removing and Installing
    • ECU (Engine Control Unit)
    • V-Belt
    • Alternator
    • Starter Motor
    • DEF (adblue®) Quality Sensor
    • Sensors – After Treatment
    • Engine Assembly
  • Hydraulic Systems and Structure
    • Safety Instructions
    • Before Removing and Installing
    • Drive Coupling
    • Undercovers
    • Joystick Valve(Work Lever)
    • Main Control Valve
    • Main Pump
    • HST Pump
    • Hydraulic Oil Tank
    • Fuel Tank
    • Fan Pump
    • Oil Cooler Fan Motor
    • Travel Device
    • Dozer Blade
    • Ripper
    • Cabin
    • Cabin Tilting Cylinder
  • Electric and Electronic
    • Safety Instructions
    • Before Removing and Installing
    • Battery Assembly
    • EPOS Controller
    • TMS Controller
    • TCU Controller
    • Cabin Switches
    • Display Monitor
    • Hour Meter
    • Wiper Motor
• Troubleshooting Guide
  • Wiring Harness Layout
    • Safety Instructions
    • Wiring Device
  • Error Code
    • Safety Instructions
    • EPOS Error Code
    • 1. Engine Fault Code List
    • HST Error Code
• Schematics
  • DD130 Hydraulic Schematic
  • DD130 Electric Schematic
  • Engine Harness
  • Main Harness
  • Cabin Harness

Develon