Case B110D, B95D, B95DTC Tier 4B Final Tractor Loader Backhoe Operators Manual (92740624) (September 2025)
These Case B110D/B95D/B95DTC backhoes usually live on construction sites, farms, utility digs—dust, mud, frozen mornings, tight spaces. This operators manual helps you run the machine the way it was designed, not the way the last guy guessed. You’ll learn how the controls actually respond when you’re crowding a trench wall, backing up on a slope, or trying to feather the loader in wet clay. Say you’re loading trucks on a slight grade in sloppy mud: the book walks you through how to set up, which functions to test first, and what to check before you blame the hydraulics.
Applications & Use Cases
- Trace and set up the controls so you know how it’ll react when you swing the boom fast or crowd the bucket under load.
- Check daily items—fluids, filters, pins, tires—so you catch problems early instead of after something seizes.
- Verify proper 4WD and diff lock use when you’re working on slopes or in ruts, so you don’t bury it or stress the driveline.
- Isolate basic hydraulic issues by learning how to test functions in a safe order before you ever grab a wrench.
- Inspect and route hoses, then learn how to bleed off pressure correctly so you don’t pop a quick-connect in your face.
FAQ
Q: Is this manual searchable on a laptop or tablet?
A: Yes, the digital versions are typically searchable, so you can jump straight to things like “transport” or “stabilizers.”
Q: Can I print just a few pages to keep in the truck?
A: You usually can; most folks print the maintenance schedule and the hydraulic safety pages for jobsite use.
Safety Note
Always kill the engine and verify hydraulic pressure is bled off before you disconnect or crack any hose or fitting.
Case B110D, B95D, B95DTC Tier 4B Final Tractor Loader Backhoe Index:
- GENERAL INFORMATION
- Note to the owner
- Intended use
- Electro-Magnetic Compatibility (EMC)
- Product identification
- Read the operator’s manual
- Operator’s manual storage on the machine
- Machine orientation
- Component Identification
- Selective Catalytic Reduction (SCR) exhaust treatment – Product overview
- Emissions overview
- SAFETY INFORMATION
- Safety rules and signal word definitions
- Safety rules
- Seat belt
- Fire extinguisher
- Safety rules – Utility precautions
- Safety rules – Fuel handling precautions
- Safety rules – Specific precautions to this machine
- Safety rules – Ductile iron
- Support strut for loader lift arm
- Hand signals
- Ecology and the environment
- Noise and vibration levels
- Safety signs
- Selective Catalytic Reduction (SCR) decals
- CONTROLS AND INSTRUMENTS
- Access to operator’s platform
- Access to operator’s platform
- Cab windshield and windows – Open/Close
- Operator’s seat
- Forward controls
- Steering column
- Right-hand multi-functional lever
- Front control panel – Two-Wheel Steer (2WS only)
- Pedal controls
- Transmission controls
- Right-hand side controls
- Key start switch
- Parking brake switch
- Console controls
- Right side post controls
- Exterior controls
- Battery master switch
- Rotating beacon (Optional)
- INSTRUMENT CLUSTER
- Instrument Cluster (IC)
- Menu screen display
- Selective Catalytic Reduction (SCR) exhaust treatment – Overview
- NO TITLE
- NO TITLE
- NO TITLE
- NO TITLE
- CAB CONTROLS AND ADJUSTMENTS
- Cab features
- Bluetooth® radio (if equipped)
- LOADER ATTACHMENT CONTROLS
- Loader attachment control lever
- BACKHOE ATTACHMENT CONTROLS
- Remove the backhoe from the stowed position – center pivot
- Place the backhoe in the stowed position – center pivot
- Backhoe attachment mechanical controls
- Backhoe attachment pilot controls version
- CLIMATE CONTROLS
- Heating, Ventilation, and Air Conditioning (HVAC) controls
- Cab air louvers
- OPERATING INSTRUCTIONS
- Commissioning the unit
- Before using the machine
- Operating the machine
- Run in period of a new machine
- Starting the unit
- Before starting the engine
- Normal engine starting
- Engine speed
- Cold temperature operation
- Hot temperature operation
- Operating the machine in high altitude
- Operating the machine in water
- Assisted starting (Jump-starting)
- Stopping the unit
- Moving the unit
- Job site travel
- Before operating the machine
- Traveling on a hill
- Auto powershift
- 2WD or 4WD
- Differential lock button
- Glide Ride™ – Two-Wheel Drive (2WD) only
- Auto-Glide Ride™ (AGR) – Four-Wheel Drive (4WD) only
- Parking the unit
- TRANSPORT OPERATIONS
- Road transport
- Precautions for road travel
- Preparing for road transport
- Preparing the machine for road travel
- Shipping transport
- Transporting on a trailer
- Lifting the machine
- Recovery transport
- WORKING OPERATIONS
- General information
- Forward-Neutral-Reverse (F-N-R) shift sensitivity
- Display brightness
- Maximum throttle/Cold start idle
- Throttle sensitivity
- Brake Enabled Idle (BEI)
- Auto idle time-out adjustment
- Auto engine shutdown time-out adjustment
- Auto engine protection shutdown setting
- Auto-Glide Ride™ (AGR) speed thresholds
- Direct Drive enable/disable (if equipped)
- LOADER ATTACHMENT
- Personal safety
- Job layout
- Comfort Steer™ (if equipped)
- Transmission disconnect trigger
- Detent position for loader control auxiliary hydraulics
- ECO power mode
- Operating the loader attachment
- Loader digging force
- Loader bucket removal
- Loader bucket install
- Hydraulic coupler – changing attachments (if equipped)
- Loader bucket with forks (optional)
- BACKHOE ATTACHMENT
- Personal safety
- Basic instructions
- Backhoe danger area
- Swing lock
- Basic backhoe operations
- Setting the backhoe attachment in working position – center pivot
- Stabilizer pads – center-pivot machines
- Auxiliary hydraulics
- Operating the backhoe attachment
- Power Lift™
- Power Boost
- Backhoe bucket – Removal
- Backhoe bucket – Installation
- Backhoe bucket – Digging angle
- Ballasting
- Lifting loads with backhoe attachment
- Auto idle operation
- One-Touch Idle (OTI), if equipped
- MAINTENANCE
- General information
- Maintenance safety
- Fire extinguisher
- Engine hood
- Fuel tank
- General specification – Diesel fuel
- General specification – Biodiesel fuels
- Selective Catalytic Reduction (SCR) exhaust treatment – Basic instructions
- Hydraulic oil
- Work hours and intervals
- Engine oils
- Organic Acid Technology (OAT) coolant
- Capacities
- Diagnostic/Service tool port
- Hydraulic diagnostic test ports
- Maintenance planning
- At warning message display
- Engine air filters
- Hydraulic filter(s)
- Fuel system water separator
- Diesel Exhaust Fluid (DEF)/AdBlue®/ARLA tank – Filling
- Diesel Exhaust Fluid (DEF)/AdBlue®/ARLA tank – Drain fluid
- Hydrocarbon management
- Initial 10 hours
- Every 10 hours
- Checks at start-up and before each workshift (10 hours)
- Working attachments — Loader attachment
- Working attachments — Backhoe attachment
- Engine oil level — Check
- Engine coolant — Check
- Radiator, oil cooler, and condenser — Check
- Alternator — Check
- Hydraulic oil level — Check
- Hydraulic hoses, tubes, and fittings
- Check wheels and tires
- Every 50 hours
- Working attachments – greasing
- Door hinges
- Front axle trunnion
- Front axle king pins
- Seat and seat belt
- Fuel pre-filter – draining condensation
- Tire pressure
- Every 250 hours
- Drive shaft lubrication
- Engine cooling system — Check
- Fuel tank – Drain fluid
- Hydraulic oil tank breather / filler cap – cleaning
- Transmission oil level
- Front axle breather (4WD) – Clean
- Front axle and reduction gear oil level (4WD)
- Front axle system – Check — (2WD)
- Rear axle oil level
- Rear axle breather
- Radiator and condenser – cleaning
- Drive belts – check
- Cab air filter
- Heater and evaporator (Air-conditioning system) – Cleaning
- Telescopic dipper
- Battery terminals
- Roll Over Protective Structure (ROPS) mechanism and hardware check
- Every 500 hours
- Engine oil and filter
- Fuel filter
- Fuel prefilter
- Diesel Exhaust Fluid (DEF)/AdBlue® tank filler screen
- Diesel Exhaust Fluid (DEF)/AdBlue® in-line filter
- Every 1000 hours
- Hydraulic oil filter
- Hydraulic oil
- Power shuttle transmission – Oil change
- Power shuttle transmission – Oil filter replacement
- Power shuttle transmission – Screen filter cleaning
- Powershift transmission – Oil change
- Powershift transmission – Oil filter replacement
- Front axle fluid – Four-Wheel Drive (4WD)
- Rear axle
- Machine inspection and cleaning
- Brake pedal lever – Greasing
- Hydraulic cylinders
- Alternator – check
- Every 1500 hours of operation or annually
- Every 3000 hours
- Diesel Exhaust Fluid (DEF)/AdBlue® supply module filter
- Every 4000 hours
- As required
- Drive belt
- Air-conditioning compressor drive belt
- Turbocharger – Check
- Fuel system bleeding
- Battery removal and installation
- Telescopic dipper (if equipped)
- Bucket teeth
- Loader bucket – Self-leveling adjustment
- Disable parking brake
- Hydraulic system – Release pressure
- Bi-directional auxiliary hydraulic pressure and flow
- Uni-directional auxiliary hydraulic pressure and flow
- Machine lights
- Fuses and relays – Power shuttle
- Fuses and relays – Powershift
- Storage
- Machine storage
- Preparation for use after storage
- TROUBLESHOOTING
- Fault code resolution
- Troubleshooting
- Engine – Troubleshooting
- Starter motor – Troubleshooting
- Alternator – Troubleshooting
- Transmission – Troubleshooting
- Axles – Troubleshooting
- Steering system – Troubleshooting
- Hydraulic systems – Troubleshooting
- Loader attachment – Troubleshooting
- Backhoe attachment – Troubleshooting
- Swing – Troubleshooting
- Hydraulic pump – Troubleshooting
- Electrical systems – Troubleshooting
- Cab – Troubleshooting
- Air-conditioning system – Troubleshooting
- Alarm(s)
- SPECIFICATIONS
- Capacities
- Engine
- Powertrain
- Brakes and controls
- Hydraulics
- Front counterweight
- Buckets
- Tires
- Dimension – Two-Wheel Steer (2WS) Straight Loader Arm (SLA)
- Dimension – Two-Wheel Steer (2WS) Tool Carrier (TC)
- Loader performances – Loader Arm
- Dimension – Two-Wheel Steer (2WS) w/ 14FT Backhoe
- Dimension – Two-Wheel Steer (2WS) w/ 15FT Backhoe
- Backhoe hydraulic lifting capacities – Two-Wheel Steer (2WS) w/ 14FT Backhoe
- Backhoe hydraulic lifting capacities – Two-Wheel Steer (2WS) w/ 15FT Backhoe
- ACCESSORIES
- Mechanical loader bucket quick coupler
- Mechanical backhoe bucket quick coupler
- Backhoe attachment auxiliary hydraulic tools
- Hand held auxiliary hydraulic tools
- Backhoe attachment safety valves
- Reversible stabilizer pads
- Universal backhoe bucket coupler
- Telematics with New Holland FleetForce™
CNH
