CNH FRONT BLADE WITH HALOGEN HEAD LAMPS KIT Installation Instructions (92711354)

CNH FRONT BLADE WITH HALOGEN HEAD LAMPS KIT Installation Instructions (92711354)

Out in the yard or on a jobsite, that front blade’s pushing snow, dirt, or gravel while you’re trying to see through dust, dark, and lousy weather. This installation manual walks you through how to mount, route, and wire the CNH front blade and halogen headlamp kit so it actually lines up and works like it should. Say you’ve got a new blade on a loader and the lights keep flickering; with this, you can trace the harness, verify grounds, and test connections instead of guessing.

Applications & Use Cases

• Route the wiring harness cleanly, then inspect and secure it so it doesn’t rub through or get pinched by the blade linkage.
• Check bracket locations, align the blade frame, and verify clearances so you don’t smash hoses or lamps on full lift and tilt.
• Isolate a lighting fault by following the manual’s diagrams to trace power, test connectors, and confirm switch operation.
• Bleed and secure any hydraulic connections involved in the blade install, then check for leaks under operation.
• Use the hardware layout to verify you’re using the right bolts and torque pattern, so the blade won’t work loose under load.

FAQ

Q: Is this a PDF I can search on my laptop or phone?

A: It’s typically a standard PDF, so you can use keyword search to jump to wiring or mounting sections.

Q: Can I print just a few pages to take to the machine?

A: Yes, most folks print the diagrams and step lists so they can get them greasy without wrecking the whole manual.

Safety Note

Always support the blade and lock out the machine before you crawl under it to inspect, route, or test anything.

CNH FRONT BLADE WITH HALOGEN HEAD LAMPS KIT Index:

SAFETY INFORMATION
Basic instructions – Important notice regarding equipment servicing. . . . . . . . . . . . . . . . . . . . . . . 1-1
Advice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Safety rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
2 KIT CONTENT
Kit overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
3 GENERAL INFORMATION
Basic instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
4 PRE-ASSEMBLY
PREPARING FOR ASSEMBLY
Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
5 ASSEMBLY
Dozer blade
Dozer blade – Install . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

CNH

92711314 – FRONT BLADE WITH HALOGEN HEAD LAMPS KIT
CASE CONSTRUCTION
836D Mechanical Controls, Stage V – ZF
EC4 Transmission Control Unit
836D AWD Mechanical Controls, Stage
V – ZF EC4 Transmission Control Unit
[FNH836DANZHF01807 – ]
Lec