CNH OPTION LINE LONG ARM Installation Instructions (91834113)

Out in the dirt, this machine’s usually digging trenches, loading trucks, or cleaning ditches around rock, mud, and whatever else the site throws at it. This long arm installation manual helps you trace the right brackets, route the hoses, and align everything so the arm actually works the way it should, not just “looks bolted on.” Say you’ve bought a long arm kit and the boom’s already on the machine—this guide walks you through how to remove the old hardware, hang the new arm safely, then test the hydraulics without guessing.

Applications & Use Cases

• Swap a standard arm for the long arm, step by step, so you don’t miss hidden pins, shims, or bushings.
• Check and verify pin fits and boom-to-arm alignment before you fully torque anything, so you’re not fighting it later.
• Route and clamp hydraulic lines correctly, then test and bleed the system so the cylinders don’t chatter or drift.
• Isolate weird noises or slop after the install by tracing back through the setup sequence the manual lays out.
• Inspect clearances around the bucket, blade, and cab to make sure the longer reach won’t smack into anything on full swing.

FAQ

Q: Is this a PDF I can search on my laptop or phone?

A: It’s usually a PDF; you can typically search by keyword, which makes it easier to jump to the install or hydraulic sections.

Q: Can I print just a few pages to take out to the machine?

A: Yeah, most folks print the torque charts and install steps, stick them in a plastic sleeve, and keep the full file on a device.

Safety Note

Always support the boom and arm with proper stands or lifting gear before pulling pins or loosening any hydraulic connections.

CNH OPTION LINE LONG ARM Index:

1 SAFETY INFORMATION
Basic instructions – Important notice regarding equipment servicing. . . . . . . . . . . . . . . . . . . . . . . 1-1
2 KIT CONTENT
Kit content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
3 GENERAL INFORMATION
General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
4 PRE-ASSEMBLY
PREPARING FOR ASSEMBLY
Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
5 ASSEMBLY
OPTIONAL LINE (FOR ARM WITH SEATING) – LONG ARM
Long arm seating installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
Option line (for arm with seating) – Long arm line installation . . . . . . . . . . . . . . . . . . . . . . 5-3

CNH

KG1NP600-00 – OPTION LINE (LONG ARM)
CASE CONSTRUCTION
CX130D LC LATAM Market
CX130D STD TR Market
[DCH130D7NPE7D1102 –
DCH130D7NRE7D1182]
CX130D STD TR Market
[DCH130D7NSE7V2001 – ]
CX130D STD W/BLADE TR
Market [DCH130D7NNEGD1001 –
DCH130D7NRE7D1189]
CX130D STD W/BLADE TR Market
[DCH130D7NSE7V2001 – ]
CX130E LC EU Market
[DCH130R8NME8D1001 –
DCH130R8NRE8D1999]
CX130E LC EU Market
[DCH130R8NSE8D2001 – ]
CX130E STD W/BLADE EU
Market [DCH130R8NNE8D1101 –
DCH130R8NRE8D1999]
CX130E STD W/BLADE EU Market
[DCH130R8NSE8D2001 – ]
CX140E LC NA Market
[DAC140K8NNS8D1101 – ]
CX140E STD W/BLADE NA Market
[DAC140K8NNS8D1103 – ]
NEW HOLLAND CONSTRUCTION
E145D LC LATAM Market