CNH RIDE CONTROL CONVERSION KIT Installation Instructions (92148119)

Out in the yard or on a rough jobsite, that machine’s hauling, loading, and bouncing over ruts all day, and ride control is what keeps it from beating you and the frame to death. This installation manual walks you through how to route hoses, mount valves, tie into the hydraulics, and verify everything works like it should. Say you’ve bought a ride control kit and you’re not sure where to tap into the boom circuit—this is what you’d use to trace the lines, isolate the right ports, and test the system before you put it under load.

Applications & Use Cases

• Trace existing hydraulic lines so you can identify where the kit ties in without guessing or cracking the wrong fitting.
• Check mounting points and brackets, then align and bolt up components so they don’t rub, twist, or crack later.
• Verify electrical connections for any sensors or switches, then test cab controls so the system kicks in when it’s supposed to.
• Bleed the hydraulic circuit properly after install, inspecting for leaks and spongy response before you send it back to work.
• Use it to route hoses and secure clamps so they’re clear of tires, cylinders, and pinch points that usually get missed.

FAQ

Q: Is this a PDF I can search on a laptop or tablet?

A: It’s typically a standard PDF, so you can use keyword search to jump to wiring, hose routing, or test procedures.

Q: Can I print just the pages I need for the shop?

A: Yes, most folks print the hydraulic and wiring sections, stick them in a sleeve, and keep them at the machine while they work.

Safety Note

Always relieve hydraulic pressure and verify the boom is safely supported before cracking any lines or fittings.

CNH RIDE CONTROL CONVERSION KIT Index:

1 SAFETY INFORMATION
Basic instructions – Important notice regarding equipment servicing. . . . . . . . . . . . . . . . . . . . . . . 1-1
Advice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Safety rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
2 KIT CONTENT
Kit overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
3 GENERAL INFORMATION
Basic instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
4 PRE-ASSEMBLY
PREPARING FOR ASSEMBLY
Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
5 ASSEMBLY
Install
Ride control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
6 POST-ASSEMBLY
INSTRUCTIONS
Hydraulic systems – Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1

CNH

92147551 – RIDE CONTROL CONVERSION KIT
CASE CONSTRUCTION
1021G X-DRIVE Stage V – STD linkage –
2025 Updates – CVT
1121G X-DRIVE Stage V – STD linkage –
2025 Updates – CVT
1021G+ X-DRIVE Stage V STD – Cab
Upgrade – CVT
1021G+ X-DRIVE Stage V STD – Cab
Upgrade – CVT
1021G+ X-DRIVE Stage V STD – Cab
Upgrade – CVT
1021G+ X-DRIVE Stage V STD – Cab
Upgrade – CVT
1121G+ X-DRIVE Stage V STD – Cab
Upgrade – CVT
1121G+ X-DRIVE Stage V STD – Cab
Upgrade – CVT
1121G+ X-DRIVE Stage V STD – Cab
Upgrade – CVT
1121G+ X-DRIVE Stage V STD – Cab
Upgrade – CVT
Lec