Develon DL220-7 Wheel Loader Operation and Maintenance Manual (950106-03468A-EN) (10001 and Up)
This DL220-7 usually lives in the rough stuff—gravel pits, feed yards, snow work, jobsite load-out—where downtime costs you real money. This operation and maintenance manual helps you set a rhythm: what to trace, check, and inspect every day, what to service weekly or by hours, and what you can safely stretch. Say you’re heading into a busy week loading trucks; with this book you can walk the machine in ten minutes, verify fluids, test lights and brakes, and know you’re not about to lose a shift to a blown hose you should’ve seen coming.
Applications & Use Cases
- Set up a daily walk‑around so you trace leaks, check tires, and inspect pins and couplers before the loader ever leaves the yard.
- Plan your interval services so you don’t guess on filters and oils; you align your shop schedule with what the machine actually needs.
- Isolate nagging issues—odd noises, warning lights—by following the basic checks they lay out before you call a tech.
- Route grease and lube points into a simple routine so nothing gets skipped when it’s cold, dark, and you’re in a hurry.
- Verify seasonal prep steps for winter or dusty work so the loader stays predictable when conditions get ugly.
FAQ
Q: Is this a PDF I can search on my phone or laptop?
A: Yes, it’s typically a searchable PDF, so you can jump to sections by keyword instead of flipping pages.
Q: Can I print just a few sections to keep in the cab?
A: You usually can; most folks print the daily checks and lubrication charts and keep the full file back at the office or shop.
Safety Note
Always bleed off stored pressure and block the machine securely before you crawl under it or work around raised equipment.
Develon DL220-7 Wheel Loader Index:
- DL220-7
- Revision
- Table of Contents
- Foreword
- Intended Use
- Engine and Emission Control System Maintenance
- Machine Capacity
- Product Identification
- Product Identification Number (PIN)
- Engine Identification
- Machine Serial Numbers
- Safety Messages
- EC Declaration of Conformity
- UK DECLARATION OF CONFORMITY
- Regulation (EU) 2017/654 Annex XV
- Engine Operation and Maintenance
- Malfunctions & Inducement
- DEVELON Fleet Management System General Information and Privacy Notice
- Safety
- Safety Decals
- Information and Location for Safety Decals
- General
- Safe Operation is Operator’s Responsibility
- Know Your Machine
- Proper Work Tools and Attachments
- Pressurized Fluids
- Flying or Falling Objects
- Personal Protective Equipment (PPE)
- Correction of Machine Problems
- Crushing and Cutting
- Hot Coolant and Oils – Burn Prevention
- Fire and Explosion Prevention
- Fire Extinguisher and First-Aid Kit (Emergency Medical Kit)
- Electrical System and Electrical Shock
- Roll-over Protective Structure (ROPS)/ Falling Object Protective Structure (FOPS)
- Regulation 8.35(2) of the Mines Safety and Inspection Regulations (1995)
- Transportation
- Obey State and Local Over-The-Road Laws and Regulations
- Loading and Unloading
- Transporting Machine
- Operation
- Before Engine Starting
- Work Site
- Check Tire Pressure and Condition
- Mounting / Dismounting
- Cleaning
- Window Maintenance
- Operator Station
- Seat Belt
- Visibility Information
- Boost Starting or Charging Engine Batteries
- Starting Engine
- Traveling
- Lifting and Digging
- Operation on Slopes
- Towing
- Attachment
- Equipment Lowering With Engine Stopped
- Preventing Risk of Injuries or Death From Arm and Bucket
- Engine Stop
- Parking Machine
- Long Term Storage
- Before Storage
- During Storage
- After Storage
- Cleaning
- Hydraulic System
- Lubrication
- Battery
- Cooling System Care
- Preservation / Storing Machine
- Maintenance
- Warning Tag
- Cleaning
- Proper Tools and Clothing
- Disassembling Precautions
- Use of Lighting
- Fire and Explosion Prevention
- Burn Prevention
- Rubber That Contains Fluorides
- Rubber and Plastics
- Welding Repairs
- Lock Inspection Covers
- Working on Machine
- Accumulator
- Compressed Air
- Supports and Blocking for Work Equipment
- High-pressure Lines, Tubes and Hoses
- Battery
- Environment and Circumstances
- Work Site Areas Requiring Extra Caution
- High-voltage Cables
- Underground Operation
- Working in Water
- Working in Contaminated Environment
- Operation Under Abnormal Conditions
- Exhaust Ventilation
- Asbestos Information
- Silica Dust Information
- Disposal of Hazardous Materials
- Sound
- Vibration Information
- Operating Controls
- Component Locations
- Operator’s Area
- Operational Controls and Panels
- Start / Stop Button
- Smart Key
- HVAC (Heating, Ventilation and Air Conditioning) Control Keypad
- 12V Power Socket
- 24V Power Socket
- USB Power Socket
- Microphone
- Steering Column
- Accelerator Pedal
- Brake Pedal
- Differential Lock Button (Manual / If Equipped)
- Multifunction Keypad
- Joystick Lever (Elec / Hyd)
- Finger Tip Lever (If Equipped)
- Finger Tip Lever (Elec/If Equipped)
- Rear Defrost Switch
- Hazard Warning Light Switch
- Quick Coupler Switch (If Equipped)
- Air Compressor Switch (If Equipped)
- Auto Grease System Switch (If Equipped)
- Parking Brake Switch
- Pilot Cutoff Switch
- Mirror Adjustment Switch
- Emergency Start Switch
- Photo Sensor
- Seat Heater/Ventilation Switch
- Left Side Electric Steering Control Unit (If Equipped)
- Electric Steering Selector Button
- FNR Control Switch
- Kick Down Button
- Electric Steering Joystick
- Position Adjustment Knob
- Armrest Cutoff
- Front Gauge Panel
- Right / Left Turn and Hazard Warning Light
- Transmission Actual Gear
- Communications Status Symbol
- Transmission Select Gear
- Engine Coolant Temperature Gauge
- Hydraulic Oil Temperature Gauge
- Transmission Oil Temperature Gauge
- Fuel Gauge
- DEF (AdBlue®) Level Gauge
- RPM Indicator / Hour Meter
- Speedometer
- Indicator Display
- Warning Symbol Indicator
- Display Monitor
- Functional Check
- Setting a Password
- Main Warning Lamp
- Menu Selector Button
- Back Button
- Digital Clock
- Main Information Indicator
- Power Mode Indicator
- Camera Indicator
- Bookmark Button
- Main Information Selector Button
- Power Mode Selector Button
- View Mode Selector Button
- Weighing System Information Display
- HVAC Display
- Multifunction Keypad Indicator
- Audio Display
- Mode Symbol Display
- Indicator Display
- Display Warning Symbols
- Inclination Indicator
- Warning Pop-Up Messages
- User Menu
- Access Method
- Exiting / Escaping Menus
- Maintenance
- Fuel Efficiency Performance
- Machine Configuration
- Weighing Configuration
- Gauge Panel Configuration
- Operator Management
- Operator Management (Keyless Start)
- Weighing System (If Equipped)
- Weighing System Message Indicator
- Weighing Measure Weight Indicator
- Current Truck Load Weight
- Weight Remaining Relative to Target
- Target Weight
- Progress Indicator
- Cancel Previous Task utton
- Pause / Resume Button
- Count Indicator
- Count Reset Button
- Weighing System Management Button
- Zero Calibration Button
- Around View Monitoring (AVM) System (If Equipped)
- Proximity Alarm System
- Transparent Bucket System
- 1. Main Display
- 2. Rear Distance Display Button
- 3. Display On/Off Button
- 4. Left/Right View Reversal Button
- 5. Day/Night Mode Switch Button
- Camera Installation Position
- Operation Condition and Method
- Screen Composition
- HVAC (Heating, Ventilation and Air Conditioning) Operation
- Location Of Vents
- Operation
- Automatic Temperature Control Button
- Mode Selector Button
- Air Conditioner Button
- Temperature Control Button
- Fan Speed Selector Buttons
- OFF Button
- Defroster Button
- Air Inlet Selector Button
- Memory Function
- Additional Operating Instructions
- Seat Adjustment
- Grammer Seat
- 1. Weight Adjustment
- 2. Height Adjustment
- 3. Seat Pan Angle Adjustment
- 4. Seat Depth Adjustment
- 5. Absorber
- 6. Armrest Adjustment
- 7. Armrests
- 8. Headrest
- 9. Seat Heater/Ventilation
- 10. Lumbar Support
- 11. Backrest Adjustment
- 12. Fore/Aft Isolator
- 13. Fore/Aft Adjustment
- Mechanical Seat
- 1. Adjusting Seat Forward/Backward Lever
- 2 and 3. Adjusting Seat’s Angle and Height Lever
- 4. Weight Adjustment Knob
- 5. Backrest Adjustment Lever
- 6. Angle Adjustment of Armrest
- 7. Headrest
- Recommendations for Limiting Vibrations
- Sears Seat
- Forward / Backward Adjustment
- Height and Firmness Adjustment
- Headrest
- Seat Heater Switch
- Armrest Adjustment
- Lumbar Adjustment
- Backrest Adjustment
- Seat Belt
- Seat Belt Locking and Unlocking
- Miscellaneous Electrical Devices
- Cabin Light
- Circuit Breaker (50A, 80A)
- Electrical Box
- Junction Box
- DAB (Digital Audio Broadcasting) Audio
- Miscellaneous Convenience Devices
- Cabin Storage Compartments
- Sun Visor
- Sun Visor (Left, Right)
- Sunglass Case
- Cup Holder
- Tool Box
- Grease Gun Clip
- Engine Emergency Stop Switch
- Emergency Exit Glass Breaking Tool
- Full Fender
- Miscellaneous Access Covers and Doors
- Remote Door Switch
- Cabin Door Side Latch
- Side Door
- Radiator Cover
- Wheel Chocks
- Air Gun and Compressor (If Equipped)
- Air Gun
- How to Use Air Compressor
- How to Connect Air Gun
- Operation
- To Operate a New Wheel Loader
- Monitoring System
- New Machine Break-in Procedures
- Starting and Stopping Engine
- Inspection Before Starting Engine
- Operational Checks Before Starting Engine
- Engine Start
- After Start Limit Logic
- Automatic Warming Up Operation
- Plug Heater (If Equipped)
- Stopping Engine
- Checks and Maintenance After Stopping Engine
- Wait to Disconnect Indicator
- Travel
- F/R (Forward/Reverse) Travel Control System
- Machine Shut Down
- If Engine Stalls While Traveling
- Towing Procedure
- Emission Control System
- Coolant Temperature
- Engine Oil Pressure
- Charging Indicator Light
- Aftertreatment System
- Attachments (If Equipped)
- Arm Kick Out Button
- Adjustment of Bucket Position Switch
- Quick Coupler Operation
- Inspection, Maintenance and Adjustment
- Maintenance Information
- Safety Precautions
- Arrival Inspections and Delivery Instructions
- Machine Setup Position for Maintenance
- Service Position
- Handling Oil, Fuel, DEF (AdBlue®) Coolant
- Oil
- Fuel
- Biodiesel (FAME)
- DEF (AdBlue®)
- Engine Oil
- Coolant and Water for Dilution
- Grease
- Filters
- Electrical System Maintenance
- Recommend Fuel, Coolant, and Lubricant
- Lubrication
- Symbols for “Lubrication and Service Chart”
- Fluid Capacities
- Table of Recommended Lubricants
- Transmission Oil
- Axle Oils
- Maintenance Intervals
- 10 Hour / Daily Service
- Front Attachment Pins – Lubricate
- Engine Oil Level – Check
- Transmission Oil Level – Check
- Hydraulic Oil Level – Check
- Fuel Level – Check
- DEF (AdBlue®) Tank Level – Check
- Pre Fuel Filter and Water Separator – Drain
- Coolant Level – Check
- Window Washer Liquid Level – Check
- Bucket Teeth and Side Cutters – Inspect
- Cooling Fan Blade – Inspect
- Air Intake System and Emission Control System – Check
- Seat Belt – Inspect
- Mirrors – Check
- Structure – Inspect
- All Switches – Check
- Exterior Lights, Horn, Control Console Indicator, Gauge Panel – Check
- Overall of Engine Condition – Check
- Back Up Alarm and Rear Camera (If Equipped) – Check
- All Tires Pressure and Damage or Abnormal Wear – Inspect
- All Controls and Linkages – Check
- Pipes and Hoses – Check
- Brake System – Test
- 50 Hour / Weekly Service
- Perform All Daily Service Checks
- Front Attachment Pins – Lubricate
- Steering Cylinder Rod and Head Ends – Lubricate
- Upper and Lower Center Pins – Lubricate
- Air Conditioner and Alternator Belt Tension (After First 50 Hours) – Check
- Exterior of Radiator, Oil Cooler and Air Conditioner Condenser – Clean
- Air Conditioner Outer Filter – Clean
- Fuel Tank Water and Sediment – Drain
- Air Compressor Tank (If Equipped) – Check
- 250 Hour / Monthly Service
- Perform All Daily and 50 Hour Service Checks
- Front Attachment Pins – Lubricate
- Front Driveshaft – Lubricate
- Center Propeller Shaft – Lubricate
- Hydraulic Oil Tank – Drain
- Air Conditioner Belt Tension – Check
- Transmission Oil and Filter – Replace
- Hydraulic Oil Return Filter – Replace
- 500 Hour / 3 Month Service
- Perform All Daily, 50 and 250 Hour Service Checks
- Air Cleaner Outer Filter – Clean
- Engine Oil and Filter – Change
- Adjust Valve Clearance – Check
- Axle Differential and Planetaries Oil – Change
- Air Conditioner Outer Filter – Replace
- Air Conditioner Inner Filter – Clean
- Hydraulic Oil Contamination – Check
- Air Compressor Filter (If Equipped) – Clean
- 1,000 Hour / 6 Month Service
- Perform All Daily, 50, 250, and 500 Hour Service Checks
- Air Conditioner Inner Filter – Replace
- Engine – Check and Adjust
- Hydraulic Oil Tank Breather Filter – Replace
- Hydraulic Oil Return Filter – Replace
- Fuel Filter – Replace
- Pre Fuel Filter and Water Separator – Replace
- Fuel Cap Filter – Change
- Drive Belt – Check
- 1,500 Hour / 9 Month Service
- Perform All Daily, 50, 250 and 500 Hour Service Checks
- Axle Differential And Planetaries Oil – Change
- 2,000 Hour / Yearly Service
- Perform All Daily, 50, 250, 500 and 1,000 Hour Service Checks
- Transmission Oil and Filter – Drain, Replace
- Air Cleaner Inner / Outer Filter – Replace
- Coolant – Change
- Hydraulic Oil and Oil Suction Strainer – Change, Clean
- Brakes – Bleed
- Brake Accumulator – Check
- Axle Brake Disk – Check
- Steering, Brake, Driveshaft, Engine, and Fuel System – Check
- Alternator and Starter** – Check
- Rubber Antivibration Shock Mounts – Check
- Perform and Record Results of Cycle Time Tests
- Inspect Machine to Check for Cracked or Broken Welds or Other Structural Damage
- Adjust Valve Clearance** – Check
- Head Bolt Torques – Check
- 4,500 Hour / 2 Year Service
- DEF (AdBlue®) Breather Filter – Replace
- DEF (AdBlue®) Filter – Replace
- 8,000 Hour / 4 Year Service
- 12,000 Hour / 6 Year Service
- Hose In-service Lifetime Limit (European Standard ISO 8331 and EN982 CEN)
- Electrical System
- Engine Cooling System
- General
- Antifreeze Concentration Tables
- Table of Standards for Allowed Tap Water
- Handling of Accumulator
- Pilot Accumulator
- Brake Accumulators
- LIS Accumulator
- Steering Accumulator
- Tires
- Inflating Tires
- Wheel Nut, Tightening Check
- Wheel Nut Torque
- Check Tire for Damage
- Recommended Air Pressure
- Severe Conditions Maintenance
- Transportation
- Transporting Machine
- Lifting Machine
- Specification
- General Specifications
- Working Range and Dimensions
- Working Capacities
- Bucket Capacity
- Stability Data (EN – and ISO – Norms)
- Approximate Weight of Workload Materials
- Index
Develon
