Develon DX210W-7 Material Handler Operation and Maintenance Manual (950106-03790A-EN)
Out on scrap yards, recycling plants, or log decks, this DX210W-7 material handler lives in dust, mud, and tight spots where downtime hurts. This operation and maintenance manual helps you trace issues before they bite, set a steady service rhythm, and keep the hydraulics, boom, and undercarriage behaving the way they should. Say you’re heading into a busy week loading trucks all day—this book walks you through the daily walk‑around, what to inspect, what to top off, and what to leave for scheduled service so the machine doesn’t quit mid-load.
Applications & Use Cases
- Set up a daily pre-start routine so you can quickly walk around, inspect hoses, check fluids, and verify the attachment’s secure.
- Plan weekly and monthly services to bleed air from fuel or hydraulics, test functions, and route hoses or wiring so they don’t chafe.
- Trace small problems—like slow swing or weak grab—back to likely causes and isolate whether it’s operator settings, filters, or something deeper.
- Align your maintenance with seasonal work, so before peak scrap or harvest you’ve already checked wear parts and adjusted intervals.
- Train new operators on how to run it without abuse: what gauges to watch, when to back off, and how to shut down properly.
FAQ
Q: Is this a searchable PDF I can keep on a tablet in the cab?
A: It’s usually provided as a PDF you can search by keyword; most folks keep a copy on a tablet and another on the shop computer.
Q: Can I just print the pages I need for a jobsite binder?
A: Yes, most people print the sections they use most—like daily checks and service intervals—so they don’t trash the whole manual in the field.
Safety Note
Always lower and secure the front attachment, shut the machine down, and verify pressure is relieved before you inspect or open any hydraulic line.
Develon DX210W-7 Material Handler Index:
- DX210W-7 Material Handler
- Table of Contents
- Introduction
- The Intended Use
- Manual Appendix
- Safety
- Operation Cautions
- Hazard Operation
- Be careful with operating elevating cabin or front attachment.
- Be careful object or person when elevating cabin descends.
- Safety Mirror – Elevating Cabin
- Only drive the machine in a state of Elevating Cabin down and outrigger up.
- Do not work or drive on slopes.
- To secure more stability, we recommend the outrigger down when work.
- Operation Caution Decals
- Goose Neck Arm Type (SG)
- 1. Material Handler Operation
- 2. Cabin Lower Mirror
- 3. Aviod Crash from Front Attachment
- 4~7. Grease Injection
- 8. Safety Pin for Inspection
- 9. Oil Level Check
- 10. Emergency Lowering Cabin
- 11. Elevating Cabin Sticker
- 12. Keep Bystanders Away
- 13. Warning
- 14. Danger
- 15.
- Goose Neck Arm Type (DG)
- 1. Material Handler Operation
- 2. Cabin Lower Mirror
- 3. Aviod Crash from Front Attachment
- 4. Grease Injection Boom
- 5. Grease Injection Arm
- 6. Grease Injection SCE25-CE
- 7. Interval for Greasing
- 8. Safety Pin for Inspection
- 9. Oil Level Check
- 10. Emergency Lowering Cabin
- 11. Elevating Cabin Sticker
- 12. Keep Bystanders Away
- 13. Warning
- 14. Danger
- 15.
- Straight Arm Type (SL)
- 1. Material Handler Operation
- 2. Cabin Lower Mirror
- 3. Aviod Crash from Front Attachment
- 4. Grease Injection Boom
- 5. Grease Injection Arm
- 6. Grease Injection SCE25-CE
- 7. Interval for Greasing
- 8. Safety Pin for Inspection
- 9. Oil Level Check
- 10. Emergency Lowering Cabin
- 11. Elevating Cabin Sticker
- 12. Keep Bystanders Away
- 13. Warning
- 14. Danger
- 15.
- Straight Arm Type (DL)
- 1. Material Handler Operation
- 2. Cabin Lower Mirror
- 3. Aviod Crash from Front Attachment
- 4. Grease Injection Boom
- 5. Grease Injection Arm
- 6. Grease Injection SCE25-CE
- 7. Interval for Greasing
- 8. Safety Pin for Inspection
- 9. Oil Level Check
- 10. Emergency Lowering Cabin
- 11. Elevating Cabin Sticker
- 12. Keep Bystanders Away
- 13. Warning
- 14. Danger
- 15.
- Emergency Lowering of Elevating Cabin
- Emergency Cabin Lowering: Inside the Operator Station
- Emergency Cabin Lowering: From The Outside
- Safety Pin
- Safety of Elevating Cabin (If Equipped)
- Specification
- The Names of Each Part
- Specification
- Working Range
- Goose Neck Arm Type (SG & DG) for DX210W-7
- Straight Arm Type (SL & DL) for DX210W-7
- Component Weight & Solid Tire (If Equipped)
- Component Weight
- Common Items
- Goose Neck Arm (SG & DG) for DX210W-7
- Straight Arm (SL & DL) for DX210W-7
- Solid Tire (If Equipped)
- Transportation Dimension
- Goose Neck Arm (SG & DG) for DX210W-7
- Straight Arm (SL & DL) for DX210W-7
- SAE Lift Capacities
- Common Items – Outrigger Down
- 2. SMH21-33-DGEU for DX210W-7
- 3. SMH21-36-SGNA for DX210W-7
- 4. SMH21-36-DGEU for DX210W-7
- 6. SMH21-33-DLEU for DX210W-7
- 8. SMH21-35-DLEU for DX210W-7
- Operation
- Control Devices for Operation
- Goose Neck Arm Type (SG & DG) for DX210W-7
- Straight Arm Type (SL & DL) for DX210W-7
- Cabin Elevating Operation
- Lifting the Operator Station
- Lowering the Operator Station
- Alarm of Confirmation Switch
- Wheel Equipment
- Maintenance
- Greasing
- 50 Hour / Weekly Service
- Perform All 10 Hour / Daily Service Checks
- Grease Boom, Arm and Front Attachment Pins
- SG Type
- DG Type
- DL Type
- Hydraulic Oil Level Check
- Posture for Hydraulic System Oil Level Check
- Receiver Dryer (If Equipped)
- Troubleshooting
Develon
