John Deere 224 Rigid Cutterbard Platform Parts Catalog (PC1558)
The 224 rigid cutterbar platform spends its life out in the field, close to the ground, taking a beating from dust, crop residue, and the occasional rock. This parts catalog is what I use to pinpoint the exact pieces in that cutterbar and frame so I can order the right replacements the first time. Say the knife drive is chattering or a skid shoe is worn thin—this book lets me trace the whole assembly, see what ties into what, and make sure I don’t miss the bushings, shims, or hardware that keep it tight.
Applications & Use Cases
- Cross-check cutterbar, guards, and knife sections so replacements match your specific 224 setup.
- Use the exploded views to trace sub-assemblies and confirm all the seals, spacers, and fasteners you need in one order.
- Compare variant parts when Deere updated components, so you don’t mix early and late-style pieces.
- Identify small wear parts—clips, caps, and washers—that are easy to overlook during a quick visual inspection.
- Print or mark up pages in the shop to verify part orientation and component-to-component relationships during reassembly.
FAQ
Q: Can I use this catalog on a tablet in the field?
A: Yes, it’s handy to zoom in on the diagrams at the machine and confirm parts before you call in an order.
Q: Is this all I need to perform a repair?
A: No, this is for identifying and ordering parts; use a separate technical or service manual for actual repair procedures.
Safety Note
Always secure the platform and relieve any stored energy before inspecting or matching parts on the machine.
📘 Show Index
John Deere 224 Rigid Cutterbard Platform Index:
- GRIDS
- A
- A10
- A11
- A12
- A13
- A14
- A15
- A16
- F
- F03
- F04
- F05
- F06
- F07
- F08
- F09
- F10
- F11
- F12
- F13
- F14
- F15
- F16
- F17
- F18
- F19
- F21
- F22
- F23
- F24
- F25
- G
- G01
- G02
- G03
- G04
- G05
- G06
- G07
- G08
- G09
- G10
- G11
- G12
- G13
- G14
- G15
- G16
- G17
- G18
- G19
- G20
- G21
- G22
- G23
- G24
- H
- H02
- H03
- H04
- H05
- H06
- H07
- H08
- H09
- H10
- H11
- H12
- H13
- H14
- H15
- H16
- H17
- H18
- H19
- H20
- H21
- H22
- H23
- H24
- I
- I02
- I03
- I04
- I05
- I06
- I07
- I08
- I09
- I10
- I11
- I12
- I13
- I14
- I15
- I16
- I18
- I19
- I20
- I21
- I22
- I23
- J
- J01
- J02
- J03
- J04
- J05
- J06
- J07
- J08
- J09
- J10
- J11
- J13
- J15
- J16
- J17
- J18
- J19
- J20
- K
- K16
- K17
- K18
- K19
- K20
- K21
- K22
- K23
- K24
- K25
- ALPHABETICAL INDEX
- A
- ARM, BAT REEL
- ARM, BAT REEL
- ARM, PICKUP REEL
- ARM, REEL
- ARM, REEL
- ARM, REEL (RIGID AND FLEXIBLE)
- ARM, STOP
- AUGER AND SHAFT, CROSS
- AUTOMATIC HEADER HEIGHT CONTROL
- B
- BALL, INDICATOR, AUTO. HEIGHT CONTROL
- BAT REEL ARM
- BAT REEL ARM
- BAT REEL DRIVE SHAFT
- BAT REEL DRIVE SHAFT
- BAT REEL DRIVE SHAFT,SPRKTS,AND MTGS.
- BAT REEL MOUNTING
- BAT REEL MOUNTING
- BAT REEL SHIELD
- BAT REEL SHIELD
- BAT REEL SLAT
- BAT REEL SLAT
- BAT REEL SPROCKETS
- BAT REEL SPROCKETS
- BAT, PICKUP REEL
- BATSHAFT, PICKUP REEL
- BEARINGS, CROSS AUGER
- BEARINGS, KNIFE DRIVE CASE
- BELT, DRIVE, L.H. SIDE
- BLOCK, GUARD AND KNIFE REPAIR
- BOLTED KNIFE AND MOUNTINGS
- BRACKETS, CROSS AUGER
- C
- CASE, KNIFE DRIVE
- CHAIN, CYL. ROD EXTENSION
- CHAINS, DRIVE, R.H. SIDE
- CIRCUIT BOARD,DIAL-A-MATIC HDR.HGT.CONT.
- CLUTCH, CROSS AUGER DRIVE (SH)
- CLUTCH, CROSS AUGER DRIVE (SH)
- CLUTCH, SLIP, CROSS AUGER DRIVE
- CLUTCH, SLIP, CROSS AUGER DRIVE
- CONNECTORS, REEL DRIVE
- CONNECTORS, REEL LIFT
- COVER, CROSS AUGER
- CRANK, CROSS AUGER
- CROSS AUGER AND SHAFT
- CROSS AUGER BEARINGS
- CROSS AUGER BRACKETS
- CROSS AUGER COVER
- CROSS AUGER CRANK
- CROSS AUGER DRIVE
- CROSS AUGER DRIVE
- CROSS AUGER DRIVE (SH)
- CROSS AUGER DRIVE (SH)
- CROSS AUGER FINGERS
- CROSS AUGER FLIGHT EXTENSIONS
- CROSS AUGER HUB
- CROSS AUGER SHAFTS
- CROSS AUGER SHIELDS
- CROSS AUGER SPROCKET
- CROSS AUGER SUPPORT
- CUTTERBAR DRIVE
- CUTTERBAR DRIVE (SH)
- CUTTERBAR DRIVE SUPPORT SPRING
- CUTTERBAR KNIFE GUARDS (NON-CLOG)
- CYLINDER ROD EXTENSION
- CYLINDER, HYDRAULIC, LIFT REEL, MASTER
- CYLINDER, HYDRAULIC, LIFT REEL, SLAVE
- D
- DECAL, DRIVE SHAFT(SH)
- DECAL, DRIVESHAFT
- DECAL, DRIVESHAFT
- DECAL, RANGE INDICATOR
- DECAL,RANGE IND.,DIAL-A-MATIC HDR. HGT. CONT.
- DECALS
- DECALS, RIGHT-HAND AND LEFT-HAND
- DIAL-A-MATIC HDR HGT CONT,WIRING HARNESS (FLEX)
- DIAL-A-MATIC HDR.HGT.CONT.SENSING BOX
- DIAL-A-MATIC HEADER HEIGHT CONTROL MTG.
- DIVIDER POINTS (RIGID)
- DIVIDER, LOOP
- DIVIDERS, LONG, ROW CROP
- DRIVE BELT, L.H. SIDE
- DRIVE CHAINS AND SPROCKETS, R.H. SIDE
- DRIVE SHAFT DECAL (SH)
- DRIVE SHAFT, BAT REEL
- DRIVE SHAFT, BAT REEL
- DRIVE SHAFT, DECAL
- DRIVE SHAFT, DECAL
- DRIVE SHAFT, HEADER – SIDEHILL
- DRIVE SHEAVES, L.H. SIDE
- DRIVE TIGHTENERS, L.H. SIDE
- DRIVE TIGHTENERS, R.H. SIDE
- DRIVE, CUTTERBAR
- DRIVE, CUTTERBAR
- DRIVE, CUTTERBAR (SH)
- E
- EXTENSION CYL. ROD
- EXTENSION, RAM
- EXTENSIONS, FLIGHT, CROSS AUGER
- F
- FEED PLATES, MAIN SILL, AND SUPPORTS
- FINGER, PICKUP REEL
- FINGERS, CROSS AUGER
- FLEXIBLE FRAME
- FLEXIBLE FRAME
- FLEXIBLE STABILIZER
- FLIGHT EXTENSIONS
- FLOOR STRIPPER
- FRAME
- FRAME
- FRAME (FLEXIBLE)
- FRAME (FLEXIBLE)
- FRAME (RIGID AND FLEXIBLE)
- FRAME (RIGID AND FLEXIBLE)
- FRAME (RIGID)
- FRAME (RIGID)
- G
- GUARD AND KNIFE REPAIR BLOCK
- GUARD, PICKUP REEL
- GUARD, PICKUP REEL
- GUARDS AND WEAR PLATES
- GUARDS, CUTTERBAR KNIFE (NON-CLOG)
- GUARDS, LIFTING
- H
- HARNESS, WIRING, AUTO. HEIGHT CONTROL
- HEADER DRIVE SHAFT – SIDEHILL
- HEADER HEIGHT CONTROL, DIAL-A-MATIC
- HOSE, HYDRAULIC DRIVE REEL
- HOSES, HYDRAULIC, PICKUP REEL
- HOSES, REEL DRIVE
- HOSES, REEL LIFT
- HOSES, REEL LIFT
- HUB, CROSS AUGER
- HYDRAULIC CYLINDER, LIFT REEL, MASTER
- HYDRAULIC CYLINDER, LIFT REEL, SLAVE
- HYDRAULIC DRIVE REEL HOSE
- HYDRAULIC DRIVE REEL HOSES, PICKUP REEL
- HYDRAULIC DRIVE REEL LINES
- HYDRAULIC DRIVE REEL LINES
- HYDRAULIC DRIVE REEL LINES, BAT REEL
- HYDRAULIC HOSES, BAT REEL
- HYDRAULIC LIFT REEL MASTER CYLINDER
- HYDRAULIC LIFT REEL OIL LINES
- HYDRAULIC LIFT REEL OIL LINES
- HYDRAULIC LIFT REEL SLAVE CYLINDER
- HYDRAULIC MOTOR, HYDROSTATIC DRIVE REEL
- HYDROSTATIC DRIVE REEL HYDRAULIC MOTOR
- I
- IDLER, KNIFE DRIVE
- IND.,RANGE,DIAL-A-MATIC HDR. HGT. CONT.
- INDICATOR, RANGE, AUTO. HEIGHT CONTROL
- K
- KNIFE AND GUARD REPAIR BLOCK
- KNIFE AND MOUNTINGS, BOLTED
- KNIFE AND MOUNTINGS, RIVETED
- KNIFE DRIVE CASE
- KNIFE DRIVE CASE BEARINGS AND SUPPORTS
- KNIFE DRIVE IDLER AND TIGHTENER
- KNIFE GUARDS, CUTTERBAR (NON-CLOG)
- L
- LIFTING GUARDS
- LINES, HYDRAULIC DRIVE REEL
- LINES, HYDRAULIC, BAT REEL
- LINES, OIL, HYDRAULIC LIFT REEL
- LINES, OIL, HYDRAULIC LIFT REEL
- LINES, REEL, HYDRAULIC DRIVE
- LINK, PUSH, STOP ARM
- LINKAGE, HEIGHT SENSING
- M
- MAIN SILL, FEED PLATES, AND SUPPORTS
- MOTOR, HYD., HYDROSTATIC DRIVE REEL
- MOTOR, REEL
- MOUNTING, AUTO. HEADER HEIGHT CONTROL
- MOUNTING, BAT REEL
- MOUNTING, BAT REEL
- MOUNTING, CUTTERBAR DRIVE
- MOUNTING, ROW CROP DIVIDERS
- MOUNTINGS, BAT REEL DRIVE
- N
- O
- OIL LINES, HYDRAULIC LIFT REEL
- OIL LINES, HYDRAULIC LIFT REEL
- OIL LINES, REEL LIFT
- P
- PICKUP REEL
- PICKUP REEL
- PICKUP REEL ARM
- PICKUP REEL ARM
- PICKUP REEL ARM
- PICKUP REEL BAT
- PICKUP REEL BAT
- PICKUP REEL BATSHAFT
- PICKUP REEL BATSHAFT
- PICKUP REEL DRIVE SHAFT
- PICKUP REEL DRIVE SHAFT
- PICKUP REEL ECCENTRIC SPIDER
- PICKUP REEL FINGER
- PICKUP REEL FINGER
- PICKUP REEL FINGER
- PICKUP REEL GUARD
- PICKUP REEL GUARD
- PICKUP REEL MOUNTINGS
- PICKUP REEL MOUNTINGS
- PICKUP REEL SPIDER
- PICKUP REEL SPIDER PLATE
- PICKUP REEL SPIDER PLATE
- PICKUP REEL SPROCKETS
- PICKUP REEL SPROCKETS
- PIN, REEL ARM
- PLATE, DIVIDER POINT SKID
- PLATE, PICKUP REEL SPIDER
- PLATES, PROTECTION (RIGID)
- PLATES, SKID (RIGID)
- POINTS, DIVIDER (RIGID)
- PROTECTION PLATES (RIGID)
- R
- REEL ARM
- REEL ARM (RIGID AND FLEXIBLE)
- REEL ARM (RIGID AND FLEXIBLE)
- REEL LIFT OIL LINES
- REEL LINES, HYDRAULIC DRIVE
- REEL MOTOR
- REEL, PICKUP
- REINFORCEMENT, STOP ARM
- RIGID FRAME
- RIGID FRAME
- RIVETED KNIFE AND MOUNTINGS
- ROW CROP LONG DIVIDERS
- S
- SEALS
- SENSING SWITCHES, AUTO. HDR. HGT. CONT.
- SHAFT AND AUGER, CROSS
- SHAFT, BAT REEL DRIVE
- SHAFT, CROSS AUGER DRIVE
- SHAFT, CROSS AUGER DRIVE
- SHAFT, CROSS AUGER DRIVE (SH)
- SHAFT, CROSS AUGER DRIVE (SH)
- SHAFT, CUTTERBAR DRIVE
- SHAFT, HEADER DRIVE – SIDEHILL
- SHAFTS, CROSS AUGER
- SHEAVE, CUTTERBAR DRIVE (SH)
- SHEAVE, IDLER, KNIFE DRIVE
- SHIELD
- SHIELD, BAT REEL
- SHIELD, BAT REEL
- SHIELD, CROSS AUGER DRIVE
- SHIELD, CROSS AUGER DRIVE
- SHIELD, CROSS AUGER DRIVE (SH)
- SHIELD, CROSS AUGER DRIVE (SH)
- SHIELD, CUTTERBAR DRIVE
- SHIELD, CUTTERBAR DRIVE (SH)
- SHIELDS, CROSS AUGER
- SHIELDS, DRIVE
- SHOE, DIVIDER
- SHOES, SKID (FLEXIBLE)
- SIDEHILL – HEADER DRIVE SHAFT
- SKID PLATES (RIGID)
- SKID SHOES (FLEXIBLE)
- SLAT, BAT REEL
- SLAT, BAT REEL
- SPIDER, ECCENTRIC, PICKUP REEL
- SPRING, CUTTERBAR DRIVE
- SPRING, STABILIZER
- SPRING, STABILIZER
- SPROCKET, CROSS AUGER
- SPROCKET, CROSS AUGER DRIVE
- SPROCKET, CROSS AUGER DRIVE
- SPROCKET, CROSS AUGER DRIVE (SH)
- SPROCKET, CROSS AUGER DRIVE (SH)
- SPROCKET, CUTTERBAR DRIVE
- SPROCKETS, BAT REEL
- SPROCKETS, BAT REEL
- SPROCKETS, BAT REEL DRIVE
- SPROCKETS, PICKUP REEL
- SPROCKETS, PICKUP REEL
- STABILIZER (FLEXIBLE)
- STABILIZER ARM
- STABILIZER SPRING
- STABILIZER SPRING
- STOP ARM, PUSH LINK, AND REINFORCEMENT
- STOP, CYL. ROD EXTENSION
- STRIPPER, FLOOR
- SUPPORT, CROSS AUGER
- SUPPORTS, KNIFE DRIVE CASE
- SUPPORTS, MAIN SILL, AND FEED PLATES
- SWITCHES, MOUNTING, AUTO. HEIGHT CONTROL
- SWITCHES, SENSING, AUTO. HEIGHT CONTROL
- T
- TIGHTENER, KNIFE DRIVE
- TIGHTENERS AND SHEAVE ON L.H. SIDE
- TIGHTENERS AND SPROCKETS, R.H. SIDE
- W
- WEAR PLATES
- WIRING HARNESS-AUTO. HDR. HEIGHT CONTROL
- WIRING HARNESS,DIAL-A-MATIC HDR HGT CONT
John Deere
