John Deere 410G Backhoe Loader Index:

• Contents
  • Safety—Safety Features
    • Safety Features
  • Safety—General Precautions
    • Recognize Safety Information
    • Follow Safety Instructions
    • Operate Only If Qualified
    • Wear Protective Equipment
    • Avoid Unauthorized Machine Modifications
    • Inspect Machine
    • Stay Clear Of Moving Parts
    • Avoid High-Pressure Fluids
    • Beware Of Exhaust Fumes
    • Prevent Fires
    • Prevent Battery Explosions
    • Handle Chemical Products Safely
    • Dispose Of Waste Properly
    • Prepare For Emergencies
  • Safety—Operating Precautions
    • Use Steps And Handholds Correctly
    • Start Only From Operator’s Seat
    • Use And Maintain Seat Belt
    • Prevent Unintended Machine Movement
    • Prevent Unintended Machine Movement—If Equipped With Pilot Controls
    • Avoid Work Site Hazards
    • Keep Riders Off Machine
    • Avoid Backover Accidents
    • Avoid Machine Tipover
    • Add And Operate Attachments Safely
    • Use Special Care When Operating
    • Operating Or Traveling On Public Roads
    • Inspect and Maintain ROPS
  • Safety—Maintenance Precautions
    • Park And Prepare For Service Safely
    • Service Cooling System Safely
    • Remove Paint Before Welding or Heating
    • Make Welding Repairs Safely
    • Drive Metal Pins Safely
  • Safety—Safety Signs
    • Safety Signs (S.N. —919463)
    • Safety Signs (S.N. 919464—)
  • Operation—Operator’s Station
    • Pedals and Levers
    • Pedals and Levers—If Equipped With Pilot Controls
    • Display Monitor Functions
    • Display Monitor Functions —If Equipped With Pilot Controls
    • Right-Side Console Functions
    • Controls—Steering Console
    • Pilot Control Enable/Disable Switch—If Equipped
    • Pattern Select Switch—If Equipped (S.N. —919463)
    • Horn Button
    • Defroster, Heater, and Air Conditioner Controls—If Equipped
    • Side Windows—Secondary Exits
    • Rear Windows
    • Adjusting Seat
    • Seat Belt
    • Steering Wheel Tilt Lever—If Equipped
    • 12-Volt Accessory Outlets
  • Operation—Operating The Machine
    • Inspect Machine Daily Before Starting
    • Check Instruments Before Starting
    • Starting the Engine
    • Starting Fluid—Cold Weather Start Aid—If Equipped (S.N.—910057)
    • Starting Fluid—Cold Weather Start Aid—If Equipped (S.N. 910058—)
    • Using Booster Batteries—12 Volt System
    • Using Coolant Heater—If Equipped
    • Warm-Up
    • Cold Weather Warm-Up
    • Ride Control Operation—If Equipped
    • Pilot Control Operation—If Equipped
    • Driving the Machine
    • Operating Stabilizers
    • Operating Boom Lock
    • Operating Swing Lock
    • Operating Backhoe—John Deere Two-Lever Controls
    • Operating Backhoe—Excavator Two-Lever Controls
    • Operating Backhoe—John Deere Pilot Controls
    • Operating Backhoe—Excavator Pilot Controls
    • Operating Extendible Dipperstick—If Equipped
    • Operating Extendable Dipperstick Lock—If Equipped
    • Operating Backhoe Auxiliary Hydraulic Functions—If Equipped
    • Operating Loader
    • Operating Differential Lock
    • Operating Mechanical Front Wheel Drive (MFWD)—If Equipped
    • Lifting
    • Parking the Machine
    • Loading Machine on a Trailer
    • Towing
  • Maintenance—Machine
    • Diesel Fuel
    • Low Sulfur Diesel Fuel Conditioner
    • Dieselscan Fuel Analysis
    • Handling and Storing Diesel Fuel
    • Alternative and Synthetic Lubricants
    • Engine Break-In Oil
    • Diesel Engine Oil
    • Transmission, Hydraulic, Axles, and Mechanical Front Wheel Drive Oil
    • Grease
    • Grease For Extendible Dipperstick, Sideshift Frame, And Stabilizer Leg Wear Strips
    • Diesel Engine Coolant
  • Maintenance—Periodic Maintenance
    • Service Your Machine at Specified Intervals
    • Check Hour Meter Regularly
    • Prepare Machine for Maintenance
    • Loader Boom Service Lock
    • Opening and Closing Engine Hood (S.N. —903478)
    • Opening and Closing Engine Hood (S.N. 903479—)
    • Maintenance and Repair Record Keeping System
    • OILSCAN PLUS®, COOLSCAN PLUS®, Dieselscan, and 3-Way Coolant Test Kit
    • Service Intervals
    • Required Parts
  • Maintenance—As Required
    • Inspect Loader Boom Service Lock
    • Check and Adjust Boom Lock
    • Check Tire Pressure
    • Tire Inflation Pressures
    • Check Wheel Fasteners
    • Clean Cab Air Filters
    • Inspect and Clean Hydraulic Reservoir Fill Screen
    • Drain Fuel Tank Water and Sediment
    • Clean Engine Air Cleaner Dust Unloader Valve
    • Clean or Replace Air Cleaner Elements
    • Inspect Belt
    • Grease MFWD Drive Shaft Splines—If Equipped
    • Grease Extendible Dipperstick Side Rails—If Equipped
    • Grease Extendable Dipperstick Backhoes—If Equipped
    • Grease Front Wheel Bearings—Non-Powered (S.N. —911143)
    • Grease Front Wheel Bearings—Non-Powered (S.N. 911144—)
  • Maintenance—Every 10 Hours or Daily
    • Checking Hydraulic Reservoir Oil Level
    • Check Engine Oil Level
    • Check Coolant Level
    • Grease Loader Pivots
    • Grease 4-in-1 Bucket Pivots—If Equipped
    • Grease Stabilizer Pivots and Cylinder Pins
    • Grease Backhoe Linkage, Pivots, and Cylinder Rod Ends
    • Grease Non-Powered Front Axle and Steering Pivots (S.N. —911143)
    • Grease Non-Powered Front Axle Pivots (S.N. 911144—)
    • Grease MFWD Front Axle and Universal Joints—If Equipped
  • Maintenance—After First 100 Hours
    • Change Engine Break-In Oil And Replace Filter
    • Replace Transmission Oil Filter
  • Maintenance—Every 250 Hours
    • Check MFWD Planetary Housing Oil—If Equipped
    • Check MFWD Axle Oil Level—If Equipped
    • Check Battery Electrolyte Level and Terminals
    • Check Rear Axle Oil Level
    • Check Transmission Oil Level
    • Change Engine Oil And Replace Filter (S.N.—911915)
  • Maintenance—Every 500 Hours
    • Check Coolant and Add Conditioner
    • Check Air Intake Hose
    • Replace Hydraulic Oil Filter
    • Check Boom-to-Dipperstick Pin Bolt Torque
    • Replace Hydraulic Reservoir Breather
    • Change Engine Oil And Replace Filter (S.N. 911916—)
    • Replace Fuel Filter
  • Maintenance—Every 1000 Hours
    • Clean, Pack, and Adjust Front Wheel Bearings—Non-Powered (S.N.—911143)
    • Clean, Pack, and Adjust Front Wheel Bearings—Non-Powered (S.N. 911144—)
    • Change MFWD Front Wheel Planetary Housing Oil—If Equipped
    • Change MFWD Front Axle Housing Oil—If Equipped
    • Clean Engine Crankcase Ventilation Tube
    • Change Transmission and Torque Converter Oil and Filter
    • Change Rear Axle Oil
    • Replace Pilot Control Filter
    • Check Engine Speeds
    • Check and Adjust Engine Speed Control Linkage
    • Change Hydraulic Reservoir Oil
    • Replace Engine Air Cleaner Elements
  • Maintenance—Every 2000 Hours
    • Adjust Engine Valve Lash (Clearance)
  • Miscellaneous—Machine
    • External Service Brake Inspection
    • Inspecting And Cleaning Dusty Secondary And Primary Element
    • Check Receiver-Dryer—If Equipped
    • Checking Coolant Hoses and Radiator
    • Draining the Cooling System
    • Filling the Cooling System
    • Do Not Service Or Adjust Injection Nozzles Or Injection Pump
    • Replace Engine Torsional Damper
    • Draining Fuel Filter Sediment
    • Precautions for Alternator and Regulator
    • Handling, Checking And Servicing Batteries Carefully
    • Replacing Batteries
    • Removing Batteries
    • Replacing Fuses
    • Remove and Install Halogen Bulb
    • Checking Neutral Start System
    • Changing Loader Buckets
    • Adding Front Counterweights
    • Adding Liquid Ballast to Front Tires—410G
    • Welding on Machine
    • Checking Ride Control Accumulator—If Equipped
    • Discharge Ride Control System Hydraulic Pressure—If Equipped
    • Discharge Pilot Control System Hydraulic Pressure—If Equipped
    • Lowering Boom Without Electrical Power—For Machines With Pilot Controls
    • Check Park Brake
    • Bleeding Service Brakes
    • Service Recommendations For STC®1 Fittings
    • Adjusting Speed Control Lever Tension (S.N.—913479)
    • Adjusting Speed Control Lever Tension (S.N. 913480—)
    • Adjusting Pilot Control Wrist Rest —If Equipped
    • Checking and Adjusting Toe-In (S.N. —911143)
    • Checking and Adjusting Toe-In (S.N. 911144—)
    • Installing Teeth on Backhoe Bucket
    • Checking Machine Cycle Times—410G
    • Do Not Service Control Valves, Cylinders, Pumps or Motors
    • Hardware Torque Specifications
    • Keep ROPS Installed Properly
    • Metric Bolt and Cap Screw Torque Values
    • Unified Inch Bolt and Cap Screw Torque Values
  • Miscellaneous—Operational Checkout
    • Operational Checkout Procedure
    • Gauge and Indicator Check With Engine Off
    • (Başlıksız)
    • (Başlıksız)
    • FNR, Neutral Start Circuit and Reverse Warning Alarm Checks
    • (Başlıksız)
    • (Başlıksız)
    • (Başlıksız)
    • (Başlıksız)
    • Park Brake, Indicator Light, and Engine Speed Control Linkage Checks
    • (Başlıksız)
    • (Başlıksız)
    • Brake System Checks
    • (Başlıksız)
    • (Başlıksız)
    • (Başlıksız)
    • Steering System Checks
    • (Başlıksız)
    • Hydraulic System Checks
    • (Başlıksız)
    • (Başlıksız)
    • (Başlıksız)
    • (Başlıksız)
    • (Başlıksız)
    • (Başlıksız)
    • Pilot Control Operation Checks—If Equipped
    • (Başlıksız)
    • (Başlıksız)
    • (Başlıksız)
    • (Başlıksız)
    • (Başlıksız)
    • Check Operation Of Accessories (Engine Stopped)
    • (Başlıksız)
    • (Başlıksız)
    • (Başlıksız)
    • (Başlıksız)
    • Cab Component Checks
    • (Başlıksız)
    • (Başlıksız)
    • (Başlıksız)
    • Miscellaneous Checks
    • (Başlıksız)
    • (Başlıksız)
    • (Başlıksız)
    • (Başlıksız)
    • (Başlıksız)
  • Miscellaneous—Troubleshooting
    • Troubleshooting Procedure
    • Engine
    • Electrical System
    • Steering System
    • Hydraulic System
    • Gauges and Indicators
    • Transmission
    • MFWD
    • Rear Axle
  • Miscellaneous—Storage
    • Prepare Machine For Storage
  • Miscellaneous—Crime Prevention Tips
    • Help Prevent Crime
    • Record Construction Identification Numbers
    • Keep Proof of Ownership
    • Park Indoors Out of Sight
    • When Parking Outdoors
    • Reduce Vandalism
    • Report Thefts Immediately
  • Miscellaneous—Specifications
    • 410G Specifications
    • Ground Speeds—410G
    • 410G Backhoe Loader Dimensions
    • 410G Backhoe Loader
    • 410G Backhoe Loader Weight
    • Buckets
    • 410G Backhoe Loader Drain and Refill Capacities
    • 410G Backhoe Loader Lifting Capacities—Standard Dipperstick
    • 410G Backhoe Loader Lifting Capacities—Extendible Dipperstick (Retracted)
    • 410G Backhoe Loader Lifting Capacities—Extendible Dipperstick (Extended)
  • Miscellaneous—Machine Numbers
    • Record Product Identification Number (PIN)
    • Record Engine Serial Number
    • Record Transmission Serial Number—Powershift
    • Record Rear Axle Housing Serial Number
    • Record (MFWD) Front Axle Housing Serial Number—If Equipped
• Page Numbers
  • Section 1-1
    • 1
  • Section 1-2
    • 1
    • 2
    • 3
    • 4
    • 5
  • Section 1-3
    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
  • Section 1-4
    • 1
    • 2
    • 3
  • Section 1-5
    • 1
    • 2
    • 3
    • 4
  • Section 2-1
    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
    • 7
    • 8
    • 9
    • 10
    • 11
    • 12
    • 13
    • 14
    • 15
    • 16
    • 17
    • 18
    • 19
  • Section 2-2
    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
    • 7
    • 8
    • 9
    • 10
    • 11
    • 12
    • 13
    • 14
    • 15
    • 16
    • 17
    • 18
    • 19
    • 20
    • 21
    • 22
    • 23
    • 24
    • 25
    • 26
    • 27
    • 28
    • 29
    • 30
    • 31
    • 32
    • 33
  • Section 3-1
    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
    • 7
  • Section 3-2
    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
    • 7
    • 8
    • 9
    • 10
  • Section 3-3
    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
    • 7
    • 8
    • 9
    • 10
    • 11
  • Section 3-4
    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
    • 7
    • 8
    • 9
    • 10
  • Section 3-5
    • 1
    • 2
    • 3
  • Section 3-6
    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
  • Section 3-7
    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
  • Section 3-8
    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
    • 7
    • 8
    • 9
    • 10
  • Section 3-9
    • 1
  • Section 4-1
    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
    • 7
    • 8
    • 9
    • 10
    • 11
    • 12
    • 13
    • 14
    • 15
    • 16
    • 17
    • 18
    • 19
    • 20
    • 21
    • 22
    • 23
    • 24
    • 25
    • 26
    • 27
    • 28
    • 29
    • 30
    • 31
    • 32
    • 33
    • 34
  • Section 4-2
    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
    • 7
    • 8
    • 9
    • 10
    • 11
    • 12
    • 13
    • 14
  • Section 4-3
    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
    • 7
    • 8
    • 9
    • 10
    • 11
    • 12
    • 13
    • 14
    • 15
  • Section 4-4
    • 1
  • Section 4-5
    • 1
    • 2
    • 3
  • Section 4-6
    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
    • 7
    • 8
    • 9
    • 10
    • 11
    • 12
    • 13
    • 14
    • 15
    • 16
  • Section 4-7
    • 1
    • 2