The LTM 1040-2.1 is a multi-axle all terrain crane. It drives to site on public roads, then works with a telescopic boom. A workshop taking on a used crane that came with no paperwork is the buyer who gets the most from this set: one download, and the whole machine is documented.
What this manual set helps you do
- Operate the crane from the operating instructions, including the radio remote control menus, the support and axle suspension settings, and the daily checks.
- Order parts from the Spare Parts Catalogue, using its exploded views for groups like the cooler installation, air filter unit and drive shaft fitting.
- Trace faults in the hydraulic system and electrical system with the schematics.
- Verify setups against the load charts and technical data.
- Plan lifts and read the load moment indicator using the component manuals and LICCON software files.
Who this is for
A workshop or service company gets the most from it. You can pull up the controls, the parts breakdown and the drawings for the same crane without chasing separate sources. A rental fleet manager can also hand the right pages to operators, mechanics and the parts desk.
FAQ
Q: What do I receive and how is it organised?
A: You get 72 files, 60 of them PDF, with 8,001 PDF pages in total. The operator manual is 3,200 pages in 11 files, the parts manual is 995 pages in 1 file, and the schematics are 6 files with 649 pages. Extras include load charts, technical data, service information, diagnostic documents and software, component manuals, and CDs and software. The text can be searched and copied.
Q: Which machine does it fit?
A: The Liebherr LTM 1040-2.1 all terrain crane. The operator manual is in English, and the parts manual is in German and English.
Q: How does it help with taking on a crane that has no paperwork?
A: You get the operating instructions, the parts catalogue and the schematics for the model in one place. That covers running the crane, ordering parts and tracing circuits from day one.
Search the files by keyword, find the section you need, and get on with the job.
📘 Show Index
Table of Contents:
Operator Manual Table of Contents
3,200 pages, 11 files
- Publication 19605-11-02 (1,609 pages)
- Preface
- Description of crane
- Terminology
- Product description
- Technical data
- Operation of crane chassis
- Operating and monitoring instruments on the crane chassis
- Before starting to travel
- Axle suspension system
- Operation of crane superstructure
- Operating and monitoring instruments on the crane superstructure
- LICCON computer system
- Start up and shut down of crane
- Equipment
- Technical safety instructions for assembly and disassembly
- Folding jib – TK
- Hook blocks
- Auxiliary equipment
- Driver's cab heater / engine preheating / air conditioning system
- Crane operator's cab heater / engine preheating / air conditioning system
- Emergency control of support
- Maintenance and service
- Maintenance and service – General
- Maintenance intervals – Crane chassis
- Maintenance intervals – Crane superstructure
- Inspections of cranes
- Periodic crane inspections
- Inspecting of winches
- Inspection of crane wire ropes
- Appendix
- Preface to the appendix
- Update confirmation
- Publication 219612-01-02 (46 pages)
- Publication 919601-01-02 (156 pages)
- General
- Operating and control instruments
- Start menu of the radio remote control
- Settings and condition displays on the BTT
- Aligning the radio remote control to the crane
- Menu Engine operation crane travel gear
- Menu Support the crane
- Menu Axle suspension
- The operating screen Radio remote control
- supporting the crane
- Menu Assembly functions crane superstructure
- Menu Test system
- Start up of radio remote control
- Crane operation
- Measures in case of problems
- Inspection and maintenance
- Publication 99510-04-02 (83 pages)
- User agreement
- Product description
- Description LICCON Job planner
- Start up variation 1
- Planner program, Variation 1
- Start up variation 2
- Planner program, Variation 2
- Control, operation
- Simulation mode
- Wind surface calculator
- Wind speed calculator
- Serial No. 089385 (1,306 pages)
- Preface
- Computer viruses
- Agreement
- Introduction
- System requirements
- System requirements Tablet
- Notes on Safety
- General program operation
- Symbols for program operation
- General program operation Touch
- Quick overview for installation of the program
- Installation of program in standard operation
- Installation of program in client-server operation
- Installation
- Installation of the program
- Installation of crane data
- Starting the LICCON Work Planner
- General program description
- Load capacity program
- Planner
- Automatic crane selection
- Crane generations
- Menu program
- Automatic crane selection
- Load capacity program (crane with Setup1)
- Start the load capacity program
- Description of load capacity program
- Crane configuration
- Planner
- Starting the Planner program
- Description of Planner program
- Crane configuration (Setup2)“
- Appendix
- FAQ – Frequently Asked Questions
- Contact address
- Overview of LICCON Work Planner symbols
Parts Manual Table of Contents
995 pages, 1 file
- COOLER INSTALLATION
- RADIATOR, PRE-ASSEMBLED
- RADIATOR UNIT
- EQUALIZING RESERVOIR
- HOSES
- COOLER HYDR.SYSTEM
- PRESSURE FILTER
- DIESEL ENGINE INSTALLATION
- DIESEL ENGINE, PRE-ASSEMBLED
- TWO-STAGE PUMP
- GEAR PUMP
- PIPE SOCKET CPL
- HYDRAULIK PUMP ASSEMBLY
- DIESEL ENGINE PURCHASED PARTS
- DIESEL ENGINE
- CRANKCASE CPL
- STEERING BOX
- OIL SUMP WITH FASTENING
- CYLINDER HEAD ASSEMBLY
- CYLINDER HEAD COVER
- CRANKSHAFT
- DRIVING GEAR PARTS
- CAMSHAFT CPL
- HIGH PRESSURE PUMP
- FUEL LINES
- FUEL FILTER ADD-ON
- EXHAUST TC MOUNTING
- AIR COMPRESSOR
- ACCESSORIES AIR COMPRESSOR
- AIR INTAKE PIPE ASS
- EXHAUST GAS RECIRCUL.ATTACHM
- COOLING WATER LINE
- ENGINE ELECTRICS
- STARTER INSTALLATION
- GENERATOR
- OIL PUMP
- OIL MODULE
- OIL LINES
- WATER PUMP WITH FASTENING
- MOTOR SUSPENSION
- POWER TAKE-OFF
- AIR COND. COMPRESSOR ADD-ON
- GEARS INSTALLATION
- GEAR BOX, PRE ASSEMBLED
- POWER SHIFT GEAR
- ENGINE RACCORDEMENT
- DRIVE
- GEARBOX HOUSING
- COUPLING
- AXLE SHUTOFF
- CONTROL
- PRESSURE REGULATOR
- OIL PRESSURE PUMP
- EMERGENCY STEERING PUMP
- INDUCTIVE TRANSMITTER
- FILTER
- FILLER NECK
- HYDR.VARIABLE DISPLACEMEN PUMP
- REGULATING VALVE
- ADAPTOR
- FRONT AXLE
- FRONT AXLE, PRE-ASSEMBLED
- DRIVEN STEERING AXLE
- TRACK ROD
- BRAKE
- REPAIR KIT BRAKE LINING
- PLANETARY GEARBOX
- FINAL DRIVE
- MEMBRANE CYLINDER
- TRIPLE-STOP CYLINDER
- AXLE STRUT
- FIXING PARTS ELECTRIC
- PNE&HYD 1ST AXLE PREASSEMBLED
- FITTING
- SUSPENSION CYLINDER
- REAR AXLE WITH SUSPENSION
- REAR AXLE, PRE-ASSEMBLED
- STEERING CYLINDER
- PNE&HYD 2ND AXLE PREASSEMBLED
- TYRES
- TIRE CPL
- STEERING MECHANISM
- STEERING GEAR
- STEERING HYDRAULICS
- STEERING PIPEWORK
- CONTROL BLOCK
- DIRECTIONAL CONTROL VALVE
- EMERGENCY HAND OPERATION
- REMOTE CONTROL
- MOTOR SUPPORT
- DRIVE SHAFT FITTING
- SUPPORT SYSTEM CPL
- SLIDING BEAM WITH BEARING
- SLIDING BEAM FRONT,PRE-ASSEMB
- SLIDING BEAM REAR, PRE-ASSEMBL
- HYDR.COMPONENTS SUPPORT
- SUPPORT CYLINDER
- HYDRAULICS SLIDING BEAM PRE-AS
- UREA TANK
- PUMP
- UREA CONTAINER
- TRESTLE STRUCTURE BOOM/JIB
- JIB SUPPORT BLOCK PRE-ASSEMBLE
- STORAGE BOX
- DOOR STORAGE BOX
- BATTERY CASE MOUNTING
- BATTERY BOX, PRE-ASSEMBLED
- DOOR CPL
- ELECTRIC FOR BATTERY BOX
- CARRIER PLATE, PRE-ASSEMBLED
- BATTERY MAIN SWITCH
- FUEL FEED
- PREMOUNTED FUEL FILTER
- FUEL PREFILTER
- BALL VALVE
- OIL RESERVOIR, EXTENSION
- OIL TANK PRE-ASS
- RETURN FILTER
- FILTER ELEMENT
- AERATION FILTER
- SHUT OFF DEVICE
- AIR VESSEL MOUNTING
- EXHAUST SYSTEM
- SCR MODULE
- REDUCTION CATALYST
- AIR FILTER UNIT
- MANEUVERING COUPLING
- COUNTERWEIGHT SUPPORT
- COVERING HEATING OPENING
- DRIVER'S CABIN CPL
- DRIVER'S CABIN PRE-ASS
- DRIVER'S CABIN, GLAZED
- CONTROL PANEL CONSOL
- RESCUE CARD
- ANGULAR GEAR
- WINDSHIELD WIPER SYSTEM
- AIR DISTRIBUTOR CPL
- AIR CONDITIONING UNIT
- SERVOMOTOR
- VALVE PLATE, PRE-ASSEMBLED
- ATTACHMENT GRIP
- MIRROR MOUNTING,EL.ADJUSTABLE
- ENTRY LEFT
- ENTRY RIGHT
- CROSS-LINK BRACKET
- DRIVER CABIN, UNFINISHED
- DRIVERS CABIN PURCHASED PARTS
- ELECTRIC FOR DRIVER'S CABIN
- ANTENNA
- WINDOW GLASS
- DOOR RIGHT, CPL
- DOOR LEFT, CPL
- SEATS DRIVER'S CAB
- OPERATOR SEAT
- CO-DRIVER'S SEAT
- SUPPLEMENT SEATS DRIVERS CABIN
- WIRING HARNESS
- TACHOGRAPH
- DRIVER'S CABIN CONTROLS
- WIRES COMPL. INSTRUMENTS
- INSERTION MODULE
- TERMINAL BOARD PRE-ASS
- DASHBOARD CENTER CONSOLE PRE-A
- CENTRE BRACKET PRE-ASS
- FAN ATTACHMENT
- GROUND RAIL
- RADIO SYSTEM INSTALLATION
- TIRE COVER PANELLING
- GEAR COVER PRE-ASS
- ENGINE COVERING
- SIDE WALL RIGHT
- SIDE WALL LEFT
- COVER, INSULATED
- SOUND DAMPING
- UNDERCARRIAGE ELEC. SYSTEM
- CABLE LIST ELECTRICAL SYSTEM
- DOUBLE HORN
- COLLECTING RING
- ROTOR AND SLIPRING ASSEMBLY
- SLIP RING TRANSMITTER
- LIGHTING
- LAMP CLAMP CPL.REAR LEFT
- TAIL LAMP
- LAMP CLAMP CPL.REAR RIGHT
- BUMPER COMPL. W. COVERING
- ATTACHMENT SUPPORT
- TAIL BRAKE LIGHT
- LAMP CLAMP LEFT
- LAMP CLAMP RIGHT
- COMPRESSED AIR PLANT
- PIPEWORK AIR INSTALLATION
- AIR DRYER
- SOLENOID VALVE
- RELAY VALVE
- ADAPTER VALVE
- PNEUMAMATIC DRIVER'S CABIN
- BRAKE VALVE
- HANDBRAKE VALVE
- HYDRAULIC SUPPORT
- PIPEWORK LOWERING BRAKE VALVE
- SLIDE VALVE BLOCK
- HYDRAULIC AXLE SUSPENSION
- PIPEWORK RETROFIT CONTROL
- AXLE LOCKING VALVE
- AIR ACTUATION SECTION
- HOSE LINES UNDERCARRIAGE
- PIPELINES UNDERCARRIAGE
- HOSE LINES SLIDING ROD
- BACKING WARNING ACOUSTIC
- SENSOR COMPL
- AIR CONDITIONING UNDERCARRIAGE
- ELECTR. FOR AIR-CONDITIONING
- VOLTAGE TRANSFORMER
- ADD-ON UNIT TELMA
- EDDY CURRENT BRAKE
- EL.EQUIPMENT FOR TELMA
- RELAY BOX CPL
- MONITORING SUPPORTING PRESSURE
- TELESC.OUTRIGGER MONITORING
- LIMIT SWITCH ASSY. COMP
- EL.ADD-ON SET-LIMIT SWITCHES
- ROPE LENGTH INDICATOR
- CONTROLS AND FITTINGS
- EXTENSION TOW COUPLING, FRONT
- ADDNL.PARTS F.TIRE COVER PANEL
- SPARE WHEEL CPL
- FIXIN PARTS F.SLEWING PLATFORM
- WHEEL CHOCKS WITH HOLDER
- SUPPORT PLATES ADD-ON
- SUPPORT PLATE COMPL
- COTTER PIN
- SPRING PLUG PRE-ASS
- GREASE
- TOOLS AND ACCESSORIES
- MAIN TOOLS
- ACCESSORIES
- DISPATCH ASSY.MECH.PARTS
- ADD-ON PARTS
- BELT CARRIER SYSTEM
- LABELLING GREAT BRITAIN
- SIGNS
- PLATING
- CONSPICUOUS MARKING
- HATCHING PLAN
- EL.COMP. DISPATCH ASSEMBLY
- LIGHTING SUPPORT SYSTEM
- WORK LIGHT
- PERSONAL PROTECTION EQUIPMENT
- CAR RADIO
- ASSEMBLY PARTS F.SLEWING PLTF
- ROPE PULLEY CPL
- LUFFING RAM W. PIVOT
- LUFFING CYLINDER
- BALL SLEWING RING
- SLEWING GEAR
- HYDRO MOTOR
- DRIVING GEAR
- SWING GEAR
- MULTI-DISK BRAKE
- ANGLE THREADED BULKHEAD
- PNEUMATIC CYLINDER
- HOIST GEAR
- HOISTING GEAR PRE-ASS
- ROPE WINCH
- GEARBOX
- FLANGE BEARING
- ELECTRIC FOR WINCH 1
- WINCH REVOLUTION TRANSDUCER
- MIRROR ATTACHM.IN CRANE CABIN
- CONTROL STAND
- REWORK ARMREST LEFT
- ARM REST LEFT
- REWORK ARMREST RIGHT
- ARM REST RIGHT
- SLEWING PLATFORM PANELLING CPL
- FLAP PRE-ASS
- BOTTOM PLATE COMPL
- ADD HEATING SUPERSTRUCTURE
- ADDNL.HEATING, PRE-ASSEMBLED
- WATER HEATING SYSTEM
- EL.INSTRUMENTS F.CRANE DRIV.CA
- CABLE LIST DRIVER'S CABIN
- ELECTRIC ADD-ON PARTS CABIN
- ELECT.EQUIPMENT INSTRUM.PANEL
- MASTER SWITCH
- WARNING LIGHT
- PREMOUNT.AXIAL FLOW FAN UPPER
- SOCKET
- HYDRAULIC BALLASTING
- BALLAST EXTENSION RAM
- ADDNL. HYDRAULICS BALLASTING
- HOSE LINES BALLASTING
- LIMIT SWITCH
- FUEL TANK ADD-ON UNIT
- FUEL TANK, PRE-ASSEMBLED
- CENT. LUBRIC. SYSTEM SUPERST
- ELECTRIC PUMP
- DISTRIBUTION BLOCK
- PASSAGE NIPPLE BLOCK
- ELECTR. SYSTEM F.SLEWING PLATF
- LIMIT SWITCH ADD-ON
- CABLE LIST SLEWING PLATFORM
- ELECTR. FOR WORK AREA LIGHT
- SWITCHBOX MOUNTING PARTS
- BASE ASSEMBLY CPL
- CABLES, BASIC CONSTRUCTION CPL
- BASE ASSEMBLY
- TERMINAL STRIP
- PRE-ASSEMBLY MOUNTING UNIT
- RESISTANCE MODULE PRE-ASS
- HOLDER PRE-ASSEMBLY
- COMPRESSED-AIR SYST.SUPERSTR
- HYDRAULICS
- HYDRAULICS UPPER CARRIAGE
- TEMPER. SENSOR HYDRAULIC OIL
- MECHANICAL AUXILIARIES
- PROPORTIONAL VALVE IN SANDW.DE
- CONTROL VALVE
- SHEET
- CARTRIDGE
- VALVE BLOCK
- PRESSURE REDUCTION VALVE
- LOWERING BRAKE VALVE
- PIPELINES SUPERSTRUCTURE
- HOSE LINES SUPERSTRUCTURE
- CRANE DRIVER CAB ADDITION
- CABIN ARM PREASSEMBLY
- CRANE OPERATOR CABIN PREASS 2
- BEARING INSTALLATION
- OPERATING ELEMENT INSTALLATION
- PEDAL CANTILEVER INSTALLATION
- BRAKE VALVE PRE-ASS
- AIR SUPPLY/VENT VALVE
- CABLE INLET
- RELING
- INSTALLATION SWITCH CAB. COVER
- CRANE OPERATOR CABIN PREASS 1
- INTERNAL PANELLING INSTALLATIO
- PANELLING,LEFT
- PANELLING
- BLIND
- WINDOW ASSEMBLY
- FRONT WINDOW CPL
- ROOF WINDOW PRE-ASS
- AIR DUCT
- WIPERS INSTALLATION
- WATER CONTAINER CPL
- CRANE DRIVER CABIN, UNFINISHED
- SLIDING DOOR INSTALLATION
- CLOSING DEVICE
- GUIDE PRE-ASS
- WAGON
- HEATING CRANE DRIVER'S CABIN
- HEATING, PRE-ASSEMBLED
- OIL COOLER INSTALLATION
- OIL AIR COOLER
- HOSE LINES OIL COOLER
- AIR COND. UNIT SUPERSTRUCTURE
- ROPE WITH ACCESSORIES 1
- POUCH SOCKET
- COUNTERWEIGHT WITH CLAMP
- ADDITIONAL BALLAST
- COUNTERWEIGHT PRE-ASS
- MIRROR ATTACHM.AT SLEW.PLATFOR
- TELESCOPIC BOOM CPL
- PIVOT SECTION, PRE-ASSEMBLED
- TELESCOPIC SECTION 1 PRE-ASSEM
- GUIDE PULLEY COMPL
- TELESCOPIC SECT.2 PRE-ASSEMBL
- DEFLECTION PULLEY
- TELESCOPIC SECT.3 PRE-ASSEMB
- ANTI-TWIST DEVICE
- HOIST LIM.SWITCH PLUMMET CPL
- MECHANICAL EXTENSION SYSTEM
- ROLLER HOLDER
- SENSOR ASSEMBLY
- ROPE LENGTH ANGLE SENSOR
- CABLE EXIT
- ELECTR. SYSTEM F. BOOM
- ELECTRIC F.BASE SECTION
- TERMINAL BOX
- CABLE DRUM COMPL
- CABLE REEL
- ELECTR. FOR HEAD SECTION
- TERMINAL BOX CPL
- 2nd NECK PULLEY INSTALLATION
- CABLE DRUM INSTALLATION 1
- TRANSPORT MOUNTING
- FOLDING BRACKET PRE-ASS
- A-HEADL.SEARCHLIGHT PIVOT SEC
- MECH.AUXILIARIES FOR LIGHTING
- CARRIER, MEAS. & WARN. DEVICE
- MECH MEAS AND WARNING DEVICE
- LOCATION FIXTURE PRE-ASS
- WIND WARNING PREASSEMBLED
- OBSTRUCTION LIGHTS PREASS
- WIND VELOCITY TRANSMITTER
- ROPE BOX WITH SUSPENSION
- ROPE BOX PRE-ASSEMBLY
- LOAD HOOK
- HOOK BLOCK
- SINGLE HOOK
- MARKER CARRIER
- FOLDING JIB CPL
- SINGLE FOLDING JIB MECH.MOUNT
- SINGLE FOLD.JIB MECH.PREMOUN
- ADAPTER PRE-ASS
- LADDER ATTACHMENT
- TOOLS
- MOUNTING HOOK ROD
- MIRROR ATTACHMENT
- ANTI-SLIP COATING
- LASHINGS COMPLETE
Also in this set
- Schematics (6 files, 649 pages)
- Load charts (2 files, 176 pages)
- Technical data (13 files, 549 pages)
- Service information (1 file, 21 pages)
- Assembly and installation (1 file, 1 pages)
- Diagnostic documents and software (9 files, 1,539 pages)
- Component manuals (7 files, 870 pages)
- Liebherr LICCON Work Planner Software
- Load Moment Indicator
- CDs and software (14 files)
- LICCON_crane_data_installation
- LICCON_job_planner_software
- LICCON_lift_analyzer_software
- Other documents (7 files, 1 pages)
Liebherr PDF Manuals
All Crane Manuals
