$ 0
0
$ 0
0

Mustang 634 Telehandler Operator Manual (913324B)

Format: PDF (Printable Document)

File Language: English

File Size: 3.19 MB (Speed Download Link)

Brand: Mustang

Model: 634

Machine Type: Telehandler

Publication No.: 913324 (Rev. B)

Edition Date: June 2015

Serial No.: S/N 71301 – 71307

Type of Document: Operator Manual (operation, controls, safety and routine maintenance)

Searchable: Yes, text is searchable and copyable

Delivery: Instant download after payment

Categories: ,

$ 40

Share:

Mustang 634 Telehandler Operator Manual (913324B)

Telehandlers are the machines I hand over with the most caution, because the load zone chart decides what is safe to lift and the new operator has to read it before the first pallet goes up. This manual is the operator book for the Mustang 634 telehandler, and it runs from International Symbols and Introduction through Safety, Indicators and Controls, Operation and Adjustments, and Maintenance.

This one is publication 913324 (Rev. B), edition date June 2015, written for serial numbers S/N 71301 – 71307. It is a good fit when a 634 in that serial range has come to you without its book, or when a rental customer is taking over the machine. Contents also include Specifications, Check Lists, Lubrication, Service and Storage, Decal Locations, Load Zone Charts, Hydraulic Schematics, Electrical Schematics and Standard Hardware Torque Data.

What this manual helps you do

  • Start with the Check Lists and the Indicators and Controls section so a new operator knows what every control and gauge does before the engine is running.
  • Operate the machine by the Operation and Adjustments section, and read the Safety chapter first.
  • Check the Load Zone Charts before lifting anything, so the load stays inside what the 634 is meant to carry.
  • Grease and service the machine using the Lubrication and Maintenance sections, which hold the fluids, capacities and service routine.
  • Look up Standard Hardware Torque Data and Specifications when a bolt or a figure needs confirming, and use the Decal Locations section to see which warning labels belong where.

Who this is for

Owner-operators and contractors who run a 634 within S/N 71301 – 71307 and want the operator's book on the shelf. It also suits rental fleets and dealers who hand the machine to a new operator and need the daily checks and load charts in front of them.

Check your serial number against S/N 71301 – 71307 before you order.

Preview of the Mustang 634 Telehandler Operator Manual (913324B) (PDF, sample pages)

Does this manual fit your machine?

Mustang model 634
Machine type Telehandler
Publication No. 913324 (Rev. B)
Edition date June 2015
Serial numbers S/N 71301 – 71307

Check the model and serial number on your machine’s serial plate before ordering.

What’s inside

  • Wiring / electrical diagrams: Electrical Schematics
  • Hydraulic diagrams / schematics: Hydraulic Schematics
  • Torque values: Standard Hardware Torque Data
  • Lubrication, oils, fluids and capacities: Lubrication
  • Technical specifications: Specifications
  • Adjustments and calibration: Operation and Adjustments

How this edition differs

Compared with Mustang 634 Telehandler Operator Manual (908475C):

This manual Other edition
Publication No. 913324B 908475C
Serial numbers S/N 71301 – 71307 S/N 71101 and Before

Compared with Mustang 634 Telehandler Operator Manual (913229C):

This manual Other edition
Publication No. 913324B 913229C
Serial numbers S/N 71301 – 71307 S/N 71102 – 71300

FAQ

Where do I find the lifting limits for the 634?
Open the Load Zone Charts section, which sits after the Hydraulic and Electrical Schematics. Read it together with the Safety chapter before the first lift.

Does this book include the hydraulic and electrical diagrams?
Yes, it has Hydraulic Schematics and Electrical Schematics sections near the back. Standard Hardware Torque Data follows them.

Which serial numbers does this edition cover?
Publication 913324 (Rev. B) is for S/N 71301 – 71307. Machines at S/N 71102 – 71300 use 913229C, and S/N 71101 and before use 908475C.

Where are the fluids and service routine?
Lubrication lists the oils, fluids and capacities, and Maintenance covers the scheduled work. Service and Storage is a separate section after them.

More books for this machine

Table of Contents:

  • International Symbols
  • Introduction
  • Specifications
  • Check Lists
  • SAFETY
  • Indicators and Controls
  • Operation and Adjustments
  • Lubrication
  • Service and Storage
  • Decal Locations
  • Maintenance
  • Hydraulic Schematics
  • Electrical Schematics
  • Load Zone Charts
  • Standard Hardware Torque Data
  • Index
  • Warranty

Mustang PDF Manuals

Related Manuals

0
0
Your Cart
Your cart is emptyReturn to Shop