Normet Spraymec SF050 D Technical Information (5F762FF_1000)

Normet Spraymec SF050 D Technical Information (5F762FF_1000)

Normet Spraymec SF050 D Technical Information (5F762FF_1000) Index:

• 0. Contents
• 1. Carrier
  • 0. Carrier
  • 1. TDS Spraymec SF 050 D 100064415
  • 1.1 FOPS_ROPS conformance certificate
  • 1.2 Wheels Magnetic Particle Inspection Report
  • 2. Operator’s Manual
    • Spraymec SF 050
    • Contents
    • 1. Introduction
      • 1.1. Carrier
      • 1.2. Carrier identification
      • 1.3. Frame Structure
        • 1.3.1. Engine end Frame
        • 1.3.2. Load end Frame
        • 1.3.3. Oscillation
      • 1.4. Engine
        • 1.4.1. General
        • 1.4.2. Exhaust system
      • 1.5. Hydrodynamic Transmission
        • 1.5.1. General
        • 1.5.2. Torque Converter
        • 1.5.3. Transmission
        • 1.5.4. Transmission Controls
      • 1.6. Mechanical Transmission
        • 1.6.1. General
        • 1.6.2. Driveshafts
        • 1.6.3. Axle Assemblies
      • 1.7. Hydraulics
        • 1.7.1. Pumps
        • 1.7.2. Brakes
        • 1.7.3. Steering
    • 2. Safety Rules
      • 2.1. General Safety Rules
      • 2.2. Operating Safety Rules
      • 2.3. Label locations
    • 3. Operator Controls
      • 3.1. Dashboard
        • 3.1.1. TB7
        • 3.1.2. TB7b
        • 3.1.3. Norsmart Control system.
        • 3.1.4. Automatic Brake Application System
        • 3.1.5. Engine Control System
      • 3.2. Remote control box
      • 3.3. TB5
      • 3.4. Main Switch
      • 3.5. Circuit Breakers
      • 3.6. Driving Controls
      • 3.7. Seat
      • 3.8. Emergency Stop
      • 3.9. Pressure Gauge Kit
      • 3.10. Specific features
    • 4. Operation and Use
      • 4.1. Commissioning on Delivery
      • 4.2. Daily Operation
        • 4.2.1. Daily Maintenance Operations
        • 4.2.2. Instrumentation Checks
        • 4.2.3. Testing the Brakes
      • 4.3. Driving the Carrier
        • 4.3.1. General
        • 4.3.2. Before Start
        • 4.3.3. Engine Start
        • 4.3.4. Gear shifting
        • 4.3.5. Steering
        • 4.3.6. Setting The Carrier In Motion
        • 4.3.7. Driving on Slopes
        • 4.3.8. Road Driving
        • 4.3.9. Stopping
      • 4.4. Carrie Transfer
        • 4.4.1. Towing
        • 4.4.2. Lifting
        • 4.4.3. Lowering the Carrier Down a Mine
      • 4.5. Special Operating Conditions
        • 4.5.1. Winter Operation
        • 4.5.2. High Ambient Temperature, High Altitude
        • 4.5.3. Jump Start
        • 4.5.4. Cleaning Protective Treatment
    • Notes
  • 3. Service Schedule
  • 4. Maintenance Manual
    • Spraymec SF 050
    • Contents
    • 1. Safety precautions
      • 1.1. Service
      • 1.2. Hydraulics
      • 1.3. Other precautions
    • 2. Oil samples
      • 2.1. Evacuation and sample line operation
      • 2.2. Sample lines
    • 3. Engine
      • 3.1. Lubricant Recommendations
        • 3.1.1. Service Products
        • 3.1.2. Diesel Fuels
        • 3.1.3. Fame Fuels
        • 3.1.4. Engine Oils
        • 3.1.5. Coolant
      • 3.2. General
      • 3.3. Procedures
        • 3.3.1. Daily or once per shift (10 h)
        • 3.3.2. Every 500 hours
        • 3.3.3. Every 1000 hours
        • 3.3.4. Every 1500 hours
      • 3.4. Troubleshooting
    • 4. Powershift transmission
      • 4.1. Lubricant recommendations
      • 4.2. Procedures
        • 4.2.1. Daily or once per shift (10 hours)
        • 4.2.2. Every 500 hours
        • 4.2.3. Every 1000 hours
      • 4.3. Troubleshooting
        • 4.3.1. General
        • 4.3.2. Procedures
        • 4.3.3. Troubleshooting guide
    • 5. Mechanical transmission
      • 5.1. Lubricant Recommendations
      • 5.2. Procedures
        • 5.2.1. Daily or once per shift (10 hours)
        • 5.2.2. Weekly (50 hours)
        • 5.2.3. Every 125 hours
        • 5.2.4. Every 250 hours
        • 5.2.5. Every 500 hours
        • 5.2.6. Every 1000 hours
        • 5.2.7. As required
      • 5.3. Troubleshooting
    • 6. Hydraulic system
      • 6.1. Lubricant Recommendations
      • 6.2. Pressure accumulator safety precautions
      • 6.3. Procedures
        • 6.3.1. Daily or once per shift (10 hours)
        • 6.3.2. Every 500 hours
        • 6.3.3. Every 1000 hours
        • 6.3.4. As required maintenance
      • 6.4. Troubleshooting
        • 6.4.1. Steering
        • 6.4.2. Service brakes
        • 6.4.3. Safety/parking brakes
    • 7. Frame
      • 7.1. Lubricant Recommendations
      • 7.2. Procedures
        • 7.2.1. Weekly (50 hours)
        • 7.2.2. Every 1,000 hours
  • 5. Safety Instructions
  • 6. ADM2 Engine Fault Codes
  • 7. Schemas
• 2. Spraying
  • 0. Spraying
  • 1. Spraying Boom SB 500 B
    • Spraying Boom SB 500 B
    • Contents
    • 1. Foreword
    • 2. Introduction
      • 2.1. Technical Information SB 500 B
      • 2.2. SB 500 B Boom System
        • 2.2.1. Description
        • 2.2.2. Hydraulics
        • 2.2.3. System control
    • 3. Safety instructions
      • 3.1. General
      • 3.2. Boom Operation
      • 3.3. Boom Maintenance
      • 3.4. In case of danger
      • 3.5. Working Environment
    • 4. Operation
      • 4.1. Before Operation of the Boom
      • 4.2. Boom Handling
      • 4.3. Storage
      • 4.4. Extreme Conditions
    • 5. Maintenance
      • 5.1. Lubricant recommendations
      • 5.2. Schedule
      • 5.3. Maintenance Procedures
        • 5.3.1. Daily or once per shift (10 hours)
        • 5.3.2. Weekly (50 hours)
        • 5.3.3. Every 500 hours
        • 5.3.4. Every 1000 hours
      • 5.4. Annual Inspection
  • 2. NSP30-NSP40 Maintenance Manual
    • Concrete pump NSP30/NSP40
    • Contents
    • 1. Introduction
      • 1.1. Technical data
    • 2. Safety precautions
      • 2.1. Service
      • 2.2. Hydraulics
    • 3. Maintenance
      • 3.1. Lubricant recommendations
      • 3.2. Schedule
      • 3.3. Maintenance procedures
        • 3.3.1. Daily or once per shift (10 hours)
        • 3.3.2. Weekly (50 hours)
        • 3.3.3. Every 125 hours
        • 3.3.4. Every 250 hours
        • 3.3.5. Every 500 hours
    • 4. Repairs
      • 4.1. Switching overlap
      • 4.2. Delivery piston change
  • 3. Spraying equipment
    • Spraying Equipment
    • Contents
    • 1. Introduction
      • 1.1. Technical description
        • 1.1.1. Wet mix process
        • 1.1.2. Pumped concrete
        • 1.1.3. Accelerators
        • 1.1.4. Concrete pump
        • 1.1.5. Boom
    • 2. Controls
      • 2.1. Waterline
        • 2.1.1. Shut-off valves for water
        • 2.1.2. Water pressure regulator
        • 2.1.3. Water box emptying valve
        • 2.1.4. Water reel
        • 2.1.5. Boots washing
        • 2.1.6. Pressure washer
        • 2.1.7. High Pressure Wall Washing System
      • 2.2. Pressure air line
        • 2.2.1. Shut -off valves for compressed air
        • 2.2.2. Compressed air hose reel
      • 2.3. Concrete pump controls
        • 2.3.1. Gauges
        • 2.3.2. Control system by-pass
    • 3. Operation and Use
      • 3.1. Concrete pumping
      • 3.2. Useful tips
      • 3.3. Spraying technique
    • 4. Maintenance
      • 4.1. Schedule
      • 4.2. Maintenance procedures
        • 4.2.1. Daily or once per shift (10 hours)
        • 4.2.2. After use
        • 4.2.3. As required
    • 5. Water scaler maintenance
      • 5.1. Schedule
      • 5.2. Maintenance procedures
        • 5.2.1. Every 500 hours
  • 4. Accelerator Pump
  • 5. Norsmart Nordoser – Control System User Interface
    • NORSMART XE/ XH/ XI
    • 1. General
      • 1.1. Purpose of the system
      • 1.2. Warnings and notifications
      • 1.3. Definitions, terms and abbreviations used
    • 2. General description of the system
      • 2.1. Multi Information Display (MID)
      • 2.2. Can Hub Module (HUB)
      • 2.3. Controller Module HCM2000
      • 2.4. Controller Module HCM3100
      • 2.5. Controller Module HCM3200
    • 3. User Interface
      • 3.1. Navigation in the user interface
      • 3.2. Adjusting values
      • 3.3. Access rights of the user interface
      • 3.4. Pop-up windows of the user interface
      • 3.5. User interface alerts
      • 3.6. Drive display (1)
      • 3.7. Process Display (2)
      • 3.8. Shift information (3)
        • 3.8.1. Edit shift information (3.1)
        • 3.8.2. Process settings (3.2)
        • 3.8.3. Close shift (3.3)
        • 3.8.4. Condition monitoring settings (3.4) (Only XI control systems)
      • 3.9. Data logging (4)
        • 3.9.1. Process log window (4.1)
        • 3.9.2. Alerts window (4.2)
        • 3.9.3. Platform operating hours (4.3)
        • 3.9.4. File transfer settings (4.4) (Commercial option)
      • 3.10. Display settings window (5)
      • 3.11. Advanced settings window (6)
        • 3.11.1. Access level selection (6.1)
        • 3.11.2. Commercial options (6.2)
        • 3.11.3. Factory & default parameters (6.3)
        • 3.11.4. System versions and settings (6.4)
        • 3.11.5. System backup (6.5)
      • 3.12. Process maintenance window (7)
        • 3.12.1. Calibrations (7.1)
        • 3.12.2. Process parameters (7.2)
      • 3.13. Vehicle maintenance window (8)
        • 3.13.1. Platform parameters (8.1)
        • 3.13.2. Pedal calibrations (8.2)
        • 3.13.3. Engine and drivetrain (8.3)
        • 3.13.4. Drive speed calibration (8.4)
        • 3.13.5. Inclinometer calibration (8.5) (Optional)
      • 3.14. Boom maintenance window (9)
        • 3.14.1. Boom control parameters (9.1)
        • 3.14.2. Joystick calibrations (9.2)
        • 3.14.3. Boom adjustments (9.3)
      • 3.15. Diagnostics window (10)
        • 3.15.1. Module I/O diagnostics (10.1)
        • 3.15.2. Camera view (10.2)
        • 3.15.3. Support leg diagnostics (10.3)
        • 3.15.4. Measures (10.4)
        • 3.15.5. CAN diagnostics (10.5)
        • 3.15.6. Process diagnostics (10.6)
        • 3.15.7. Controller diagnostics (10.7)
        • 3.15.8. Wireless controller diagnostics (10.8)
      • 3.16. Compact Display Controller
    • 4. FUNCTIONS
      • 4.1. Starting up the system
      • 4.2. System update
      • 4.3. System backup
      • 4.4. System backup restoration
      • 4.5. Changing the access level using a code or a login key
        • 4.5.1. Changing the access level using a code
        • 4.5.2. Changing the access level using a login key
    • 5. Appendices
      • APPENDIX 1. System alert and info texts
        • Table 1:
        • Table 1:
      • APPENDIX 2. I/O-errors
      • APPENDIX 3. NORDOSER system alert and info texts
      • APPENDIX 4. NORDOSER/NORSTREAMER process start up enabling
      • APPENDIX 5. Warning symbol explanations
• 3. Equipment
  • 0. Equipment
  • 1. Portable Fire Extinguisher
  • 2. Hydraulic High Pressure Pumps
  • 3. Automatic Hose Reel
  • 4. Lincoln
  • 5. Brigade
  • 6. Vibrator – VIBCO service manual
• 4. Construction Chemicals
  • Mining
  • Tunnelling

Normet