Normet Utimec LF700 Agitator Technical Information (5F77333_1000) Index:

• 0. Contents
• 1. Technical Data Sheet
• 1.1. Wheel Magnetic Testing Report
  • 1.1. Wheel Magnetic Testing Report
    • 1.1. Wheel Magnetic Testing Report
    • 2016.6488.0015_I215000__O_GKN WHEE-26-09-16
  • Sagsdokumentation(P108155)
• 2. Operator’s Manual
  • Utimec LF 700 Agitator
  • Contents
  • 1. Introduction
    • 1.1. Carrier
    • 1.2. Carrier identification
    • 1.3. Frame Structure
      • 1.3.1. Engine end Frame
      • 1.3.2. Load end Frame
      • 1.3.3. Oscillation
    • 1.4. Engine
      • 1.4.1. General
    • 1.5. Hydrodynamic Transmission
      • 1.5.1. General
      • 1.5.2. Torque Converter
      • 1.5.3. Transmission
      • 1.5.4. Transmission Controls
    • 1.6. Mechanical Transmission
      • 1.6.1. General
      • 1.6.2. Driveshafts
      • 1.6.3. Axle Assemblies
    • 1.7. Hydraulics
      • 1.7.1. Pumps
      • 1.7.2. Brakes
      • 1.7.3. Steering
  • 2. Safety Rules
    • 2.1. General Safety Rules
    • 2.2. Operating Safety Rules
    • 2.3. Label locations
  • 3. Operator Controls
    • 3.1. Dashboard
      • 3.1.1. TB7
      • 3.1.2. Norsmart Control system.
      • 3.1.3. Automatic Brake Application System
      • 3.1.4. Engine Control System
    • 3.2. Main Switch
    • 3.3. Circuit Breakers
    • 3.4. Driving Controls
    • 3.5. Seat
    • 3.6. Emergency Stop
    • 3.7. Windshield wipers
    • 3.8. Air Conditioning
    • 3.9. Pressure Gauge Kit
    • 3.10. Specific features
  • 4. Operation and Use
    • 4.1. Commissioning on Delivery
    • 4.2. Daily Operation
      • 4.2.1. Daily Maintenance Operations
      • 4.2.2. Instrumentation Checks
      • 4.2.3. Testing the Brakes
    • 4.3. Driving the Carrier
      • 4.3.1. General
      • 4.3.2. Before Start
      • 4.3.3. Engine Start
      • 4.3.4. Gear Shifting
      • 4.3.5. Steering
      • 4.3.6. Setting The Carrier In Motion
      • 4.3.7. Driving on Slopes
      • 4.3.8. Road Driving
      • 4.3.9. Stopping
    • 4.4. Carrie Transfer
      • 4.4.1. Towing
      • 4.4.2. Lifting
      • 4.4.3. Lowering the Carrier Down a Mine
    • 4.5. Special Operating Conditions
      • 4.5.1. Winter Operation
      • 4.5.2. High Ambient Temperature, High Altitude
      • 4.5.3. Jump Start
      • 4.5.4. Engine Storage
• 3. Control System User Interface Manual
  • NORSMART DRIVE DISPLAY
  • 1. GENERAL
    • 1.1. Purpose of the system
    • 1.2. Warnings and notifications
    • 1.3. Definitions, terms and abbreviations used
  • 2. GENERAL DESCRIPTION OF THE SYSTEM
    • 2.1. Multi Information Display (MID)
  • 3. USER INTERFACE
    • 3.1. Navigation in the user interface
    • 3.2. Menu pop up
    • 3.3. Access rights of the user interface
    • 3.4. Pop-up windows of the user interface
    • 3.5. User interface alerts
    • 3.6. Drive display (1)
    • 3.7. Process Display (2)
    • 3.8. Process Control (3)
    • 3.9. Data logging (4)
      • 3.9.1. Process log window (4.1)
      • 3.9.2. Alerts window (4.2)
      • 3.9.3. Platform operating hours (4.3)
      • 3.9.4. File transfer settings (4.4) (Commercial option)
    • 3.10. Display settings window (5)
    • 3.11. Advanced settings window (6)
      • 3.11.1. Access level selection (6.1)
      • 3.11.2. Commercial options (6.2)
      • 3.11.3. Factory & default parameters (6.3)
      • 3.11.4. System versions and settings (6.4)
      • 3.11.5. System backup (6.5)
    • 3.12. Process maintenance window (7)
    • 3.13. Vehicle maintenance window (8)
      • 3.13.1. Platform parameters (8.1)
      • 3.13.2. Pedal calibrations (8.2)
      • 3.13.3. Engine and drivetrain (8.3)
      • 3.13.4. Drive speed calibration (8.4)
      • 3.13.5. Inclinometer calibration (8.5) (Optional)
    • 3.14. Boom maintenance window (9)
      • 3.14.1. Boom control parameters (9.1)
      • 3.14.2. Joystick calibrations (9.2)
    • 3.15. Diagnostics (10)
      • 3.15.1. Module I/O diagnostics (10.1)
      • 3.15.2. Camera view (10.2)
      • 3.15.3. Support leg diagnostics (10.3)
      • 3.15.4. Measures (10.4)
      • 3.15.5. CAN diagnostics (10.5)
  • 4. FUNCTIONS
    • 4.1. Starting up the system
    • 4.2. System update
    • 4.3. System backup
    • 4.4. System backup restoration
    • 4.5. Changing the access level using a code or a login key
      • 4.5.1. Changing the access level using a code
      • 4.5.2. Changing the access level using a login key
  • 5. Appendices
    • APPENDIX 1. System alert and info texts
      • Table 1:
      • Table 1:
    • APPENDIX 2. I/O-errors
    • APPENDIX 3. Warning symbol explanations
• 4. Service Schedule
• 4.1 Filling capacities and classifications
• 5. Maintenance Manual
  • Carrier
  • Contents
  • 1. Safety precautions
    • 1.1. Service
    • 1.2. Hydraulics
    • 1.3. Other precautions
  • 2. Oil samples
  • 3. Engine
    • 3.1. Safety Precautions
    • 3.2. General
      • 3.2.1. Lubricating Oil
      • 3.2.2. Fuel
      • 3.2.3. Coolant
      • 3.2.4. Diesel Exhaust Fluid (DEF)
    • 3.3. Procedures
      • 3.3.1. Daily or once per shift
        • Check the fuel level.
        • Check air intake piping
        • Check cooling fan
        • Check crankcase breather tube
        • Check the coolant
        • Check the fuel pre-filter
        • Check engine oil level
        • Check aftertreatment exhaust piping
        • Check diesel exhaust fluid (DEF) level
        • Check air cleaner restriction
        • Check cooling fan belt and belt tensioner
      • 3.3.2. Every 250 hours
        • Check charge-air piping
        • Check charge-air cooler
      • 3.3.3. Every 500 hours
        • Replace fuel filter
        • Replace lubricating oil and filters
        • Check engine coolant antifreeze
        • Check the battery and clean battery terminals.
        • Radiator pressure cap
      • 3.3.4. Every 1000 hours
        • Aftertreatment diesel exhaust fluid tank filter
        • Clean the radiator.
        • Replace the fuel pre-filter insert.
      • 3.3.5. Every 2000 hours
        • Flush cooling system
        • Check vibration damper (QSB 6.7)
        • Engine steam cleaning
        • Crankcase breather
      • 3.3.6. Every 4000 hours
        • Aftertreatment diesel exhaust fluid dosing unit filter
      • 3.3.7. Every 5000 hours
        • Overhead set – Adjust
  • 4. Powershift transmission
    • 4.1. Lubricant recommendations
    • 4.2. Procedures
      • 4.2.1. Daily or once per shift (10 hours)
        • Check the transmission oil level.
      • 4.2.2. Every 500 hours
        • Replace the transmission oil filter.
      • 4.2.3. Every 1000 hours
        • Change the transmission oil.
    • 4.3. Troubleshooting
      • 4.3.1. General
      • 4.3.2. Procedures
      • 4.3.3. Troubleshooting guide
  • 5. Mechanical transmission
    • 5.1. Lubricant Recommendations
    • 5.2. Procedures
      • 5.2.1. Daily or once per shift (10 hours)
        • Check the tyres visually.
      • 5.2.2. Weekly (50 hours)
        • Lubricate the propeller shaft greasing fittings.
        • Check tyre pressure and condition.
        • Check the drive line bolts.
      • 5.2.3. Every 125 hours
        • Check the axle differential oil level.
      • 5.2.4. Every 250 hours
        • Check the wheel nuts.
        • Check the axle planetary gear oil level.
      • 5.2.5. Every 500 hours
        • Check the brake plate wear.
        • Change the axle differential oil.
      • 5.2.6. Every 1000 hours
        • Change the axle planetary gear oil.
      • 5.2.7. As required
        • Air bleed the service brakes.
        • Air bleed the safety/parking brakes.
    • 5.3. Troubleshooting
  • 6. Hydraulic system
    • 6.1. Lubricant Recommendations
    • 6.2. Pressure accumulator safety precautions
    • 6.3. Procedures
      • 6.3.1. Daily or once per shift (10 hours)
        • Check the hydraulic fluid level.
        • Check there are no leaking or hanging hoses.
      • 6.3.2. Every 500 hours
        • Check the pressure accumulators
        • Replace the hydraulic return fluid filter.
        • Change the hydraulic fluid.
      • 6.3.3. Every 1000 hours
        • Accumulator gas pressure test.
      • 6.3.4. As required maintenance
        • Check the steering hydraulic pressure.
        • Check and adjust the charging pressure.
        • Check the service brake pressure.
        • Check and adjust the safety/parking brake pressure.
    • 6.4. Troubleshooting
      • 6.4.1. Steering
      • 6.4.2. Service brakes
      • 6.4.3. Safety/parking brakes
  • 7. Frame
    • 7.1. Lubricant Recommendations
    • 7.2. Procedures
      • 7.2.1. Weekly (50 hours)
        • Lubricate the carrier greasing fittings.
      • 7.2.2. Every 1,000 hours
        • Check the oscillation axle bushings.
        • Check the frame joint bearings.
        • Check the steering cylinder joint pin, pin locking and bearing.
  • 8. Enclosed Cabin Equipments
    • 8.1. Procedures
      • 8.1.1. Daily or once in shift (10 hours)
        • Fill up the windshield washer reservoir.
      • 8.1.2. Every 500 hours
        • Change or clean the cabin fresh air filter weave.
      • 8.1.3. Every 2 years
        • Change the air conditioning system dryer.
      • 8.1.4. As required maintenance
        • Ensure efficient operation of the air conditioning:
  • 9. Tightening torques
    • 9.1. Screws
    • 9.2. Screws with locking washers
      • 9.2.1. Wedge lock washers (e.g. Wurth®, HEICO®)
      • 9.2.2. Nord-lock® Steel washers
• 6. Front suspension kit LF-series Rev.2
  • Hydraulic front axle suspension
  • Contents
  • 1. Safety precautions
  • 2. Maintenance
    • 2.1. Lubricant Recommendations
    • 2.2. Pressure accumulator safety precautions
    • 2.3. Procedures
      • 2.3.1. Daily or once per shift (10 hours)
        • Check visually for leaks, wear and loose fasteners.
      • 2.3.2. Weekly (50 hours)
        • Lubricate the suspension greasing fittings.
        • Check and adjust the ride height.
      • 2.3.3. Every 1000 hours
        • Accumulator gas pressure test.
  • Notes
• 7. Concrete Mixer
  • Utimec LF 700 Agitator
  • Contents
  • 1. Introduction
    • 1.1. Technical Information
    • 1.2. Transport Of Wet Concrete
    • 1.3. Operation
    • 1.4. Main Components
  • 2. Operation
    • 2.1. Controls
    • 2.2. Charging and Discharge Parts
    • 2.3. Mixer Washing Controls
    • 2.4. Water tank
    • 2.5. Additive tank
    • 2.6. Operation
      • 2.6.1. Loading
      • 2.6.2. Delivery
      • 2.6.3. Discharging
  • 3. Lubrication and Maintenance
    • 3.1. Lubricant Recommendations
    • 3.2. Lubrication and Maintenance Schedule
      • 3.2.1. After each load
        • Concrete mixer washout schedule / procedure.
      • 3.2.2. Daily or once per shift (10 hours)
        • Clean the concrete mixer.
      • 3.2.3. Weekly (50 hours)
        • Keep the inside of the concrete mixer in clean condition.
        • Grease the concrete mixer greasing fittings.
      • 3.2.4. Bi-Weekly
        • Inspect the concrete mixer for concrete build -up.
      • 3.2.5. Every 500 hours
        • Change the drum rotation hydraulic fluid filter.
      • 3.2.6. Every 1,000 hours
        • Change the planetary gear box oil.
    • 3.3. Emergency Unloading Procedure
      • 3.3.1. Safety Precautions
      • 3.3.2. Failure of the truck engine
      • 3.3.3. Mechanical problems other than engine failure
      • 3.3.4. Problems in the hydraulic system
      • 3.3.5. Unloading manually
• 8. Voith
  • Voith turbo 120-3
  • Contents
  • 1. Introduction
    • 1.1. General
    • 1.2. Operation
  • 2. Use
    • 2.1. Control lever
    • 2.2. Fan control
    • 2.3. Definition
    • 2.4. Braking situations
    • 2.5. Roadway
    • 2.6. Ramp
  • 3. Maintenance
    • 3.1. Maintenance and lubrication schedule
    • 3.2. Maintenance procedures
      • 3.2.1. Daily or once per shift (10 hours)
        • Drain water from the modular type air filter.
        • Visual inspection
      • 3.2.2. Weekly (50 hours)
        • Check the coolant level.
        • Check the mounting bolts.
      • 3.2.3. Every 250 hours
        • Clean air line filter screen
      • 3.2.4. Every 500 hours
        • Clean the modular type air filter element.
      • 3.2.5. Every 1000 hours
        • Change oil.
        • Air intake filter
      • 3.2.6. Every 2 years
        • Change coolant.
• 8.1_Voith+Retarder_OEL
  • Table of Contents
  • 1. List of approved oils
    • 1.1. Determination of application category
    • 1.2. Oil change intervals – trucks
    • 1.3. Oil change intervals – bus
    • 1.4. Oil list
• 9. Safety Instructions
• 10. Engine Fault Codes
• 11. Fuel System
• 12. Brigade Backeye
• 13. Portable Fire Extinguisher
• 14. Schemas