Dynapac CA362PD Compaction Full Schematics Diagrams (Electrical and Hydraulic)

On a CA362PD, you’re usually working on heavy soil compaction in rough, dusty sites where wiring and hoses take a beating. This schematic set is what I’d open when I need to trace a fault logically instead of guessing. If, for example, the vibratory drum won’t engage and a dash light is flickering, I use these electrical and hydraulic diagrams to follow the power feed and control signals, then track the hydraulic flow to the valve that actually drives the drum.

Applications & Use Cases

• Trace electrical circuits from the battery to switches, relays, and actuators to isolate shorts, opens, or bad grounds.
• Follow hydraulic lines to verify which valve, hose, or cylinder is involved before you start cracking fittings loose.
• Plan repairs and retrofits, making sure added wiring or hoses are routed and tied into the correct points.
• Cross-check parts with the machine’s harness or hose layout so you order the right length and connection style.
• Support field diagnostics, letting you test with a meter or gauge in the right spot the first time.

FAQ

Q: Can I use this on a tablet in the field?

A: Yes, it’s well-suited for zooming in on circuits or hose runs on a tablet or laptop next to the machine.

Q: Is it worth printing parts of it?

A: Many techs print the key pages they use most and keep them in a plastic sleeve on the service truck.

Safety Note

Always de-energize, depressurize, and verify zero pressure/voltage before disconnecting any electrical or hydraulic components.

Dynapac CA362PD Index:

From S_N 10000117x0A000001_Rev_M_db9149b9.pdf
From S_N 72320445_Rev_B_3dfe3416.pdf
From S_N 72320486_Rev_E_1680fe3c.pdf
From S_N 72520xxx_Rev_B_3dfe3416.pdf
From S_N 72520xxx_Rev_F_25dc547f.pdf

Dynapac