Kubota LA714AU-C Front Loader Workshop Manual

The Kubota LA714AU-C is a front loader that hangs off the front of a compact tractor, doing all the bucket, pallet fork, and material handling work. People reach for this workshop manual when they're into the loader deeper than simple grease and pins. Think cylinder reseal, valve block issues, cracked loader frames, or getting the loader back on spec after a hard life.

What this manual helps you do

• Trace loader hydraulic oil flow to and from the control valve and cylinders for pressure or leak issues
• Check loader frame, boom, and mounting points for wear or damage and compare to factory limits
• Follow step-by-step procedures to remove, disassemble, and rebuild lift and curl cylinders
• Adjust loader control linkages and relief settings so lift and curl work correctly with the host tractor
• Verify correct installation of the LA714AU-C on the matching Kubota tractor, including plumbing and bracket setup

Who this is for

This is for a shop mechanic, field tech, small contractor, or owner-operator who is specifically working on the LA714AU-C loader itself, not the tractor. If you need tractor engine, HST, PTO, or general operating instructions, you want the tractor's workshop manual and the operator's handbook instead.

FAQ

Q: Is this a searchable PDF and are the diagrams readable?

A: These workshop PDFs are usually text searchable and the hydraulic and exploded diagrams are clear enough to zoom in on at the bench.

Q: Will this cover all years of the LA714AU-C loader?

A: It's written for the LA714AU-C model as a loader, and Kubota tends to keep one WSM per loader model, but you should still match your loader ID tag to "LA714AU-C".

Q: I'm just greasing and learning how to run the loader. Is this what I need?

A: No. This is a repair manual. For daily use, controls, and safety, you want the operator's manual.

Bottom line: If you're repairing or rebuilding the LA714AU-C loader itself, this is the right manual. If your problem is on the tractor side, this alone won't be enough.

Table of Contents:

A Kubota Front Loader workshop (service) manual generally covers the systems and service procedures listed below:

• Mechanism
  • Hydraulic Circuit
  • Hydraulic Block
  • Control Valve Assembly (Structure)
  • Control Valve Operation
  • Boom and Bucket Cylinders
• Servicing
  • General and Identification
  • Maintenance and Check Points
  • Troubleshooting
  • Servicing Specifications
  • Tightening Torques
  • Hydraulic Fittings
  • Mounting and Dismounting the Loader
  • Control Valve
  • Bucket, Boom and Hydraulic Cylinders

To The Reader Index:

• INFORMATION
  • SAFETY FIRST
  • SAFETY DECALS
  • LOADER TERMINOLOGY
  • SPECIFICATIONS
• [1] LOADER SPECIFICATIONS
• [2] BUCKET SPECIFICATIONS
• [3] DIMENSIONAL AND OPERATIONAL SPECIFICATIONS

Kubota Software

Kubota PDF Manuals