$ 0
0
$ 0
0

Mustang 350Z NXT2 Compact Excavator Operator Manual (50940260C)

Format: PDF (Printable Document)

File Language: English

File Size: 63.54 MB (Speed Download Link)

Brand: Mustang

Model: 350Z NXT2

Machine Type: Compact Excavator

Publication No.: 50940260 (Rev. C)

Edition Date: July 2018

Serial No.: Serial Numbers 00701 and Up

Type of Document: Operator Manual (operation, controls, safety and routine maintenance)

Searchable: Yes, text is searchable and copyable

Delivery: Instant download after payment

Categories: ,

$ 40

Share:

Mustang 350Z NXT2 Compact Excavator Operator Manual (50940260C)

Publication 50940260 (Rev. C), edition date July 2018, is the operator manual for the Mustang 350Z NXT2 compact excavator, serial numbers 00701 and up. It is written for the person sitting in the seat and the person looking after the machine day to day.

If you hand this excavator to a new customer, or a used one turned up without its book, this is the one to have in the cab. It is in English and runs from the Quick Guide and safety chapters through operation, maintenance, specifications and optional attachments.

What this manual helps you do

  • Start with the Quick Guide and the Safety chapter, which has Basic Precautions, Operating Precautions, Precautions for Servicing and the Safety Messages for the warning labels.
  • Operate the machine using the Identification of Important Parts, the Description of Control Devices and the Operating Instructions sections.
  • Check the Maintenance Table before each job, and look at the service intervals for when you work with the hydraulic breaker.
  • Look up the Torque table and the Specifications and Dimensional Diagrams when you need a figure.
  • Follow the Transportation, Care and Service in Cold Weather and Long-term Storage sections when the machine is moved or put away.

Who this is for

Rental fleet managers and owner-operators running a 350Z NXT2 get the most from it. Use it for the handover briefing, for setting up a service routine, and for explaining a problem with the Troubleshooting section.

Keep it in the cab so every operator reads the safety chapter before the first shift.

Preview of the Mustang 350Z NXT2 Compact Excavator Operator Manual (50940260C) (PDF, sample pages)

Does this manual fit your machine?

Mustang model 350Z NXT2
Machine type Compact Excavator
Publication No. 50940260 (Rev. C)
Edition date July 2018
Serial numbers Serial Numbers 00701 and Up

Check the model and serial number on your machine’s serial plate before ordering.

What’s inside

  • Troubleshooting: Troubleshooting
  • Torque values: Torque table
  • Maintenance intervals / schedule: Maintenance Table; Service intervals when using the hydraulic breaker; Nonperiodic services
  • Technical specifications: SPECIFICATIONS AND DIMENSIONAL DIAGRAMS

How this edition differs

Compared with Mustang 270Z and 350Z Compact Excavator Operator Manual:

This manual Other edition
Publication No. 50940260C 50940102A
Edition date July 2018 June 2012
Models covered only by – 270Z

FAQ

Where do I find the service intervals?
Open the Maintenance chapter and go to the Maintenance Table. It also has service intervals when using the hydraulic breaker and a section on nonperiodic services.

Which machines does it cover?
It covers the Mustang 350Z NXT2 with serial numbers 00701 and up. The older 270Z and 350Z manual, publication 50940102A from June 2012, is a separate book.

Is there help for a machine that will not work properly?
Yes, the Operation chapter ends with a Troubleshooting section. Use it before you call the workshop.

Does it cover the air conditioner and attachments?
The Optional Parts and Attachments chapter has General Precautions and a section on Handling Air Conditioner.

More books for this machine

📘 Show Index

Table of Contents:

  • 1. Introduction
    • 2. Safety Information
    • 3. Product Overview
      • 3.1 Intended uses
      • 3.2 Break in period
      • 3.3 Conditions to insure compliance with EPA emission standards Conditions de conformité avec les standards d’émission EPA
      • 3.4 Acquisition of Information on Machines in Operation and Handling of Acquired Information
    • 4. Operation License
      • 5.1 Location of machine serial number plate
      • 5.2 Location of engine serial number plate
      • 5.3 Location of EPA emission control plate
      • 5.4 Ordering replacement parts and service calls
    • QUICK GUIDE
    • SAFETY
    • 1. Basic Precautions
    • 2. Operating Precautions
      • 2.1 Precautions before starting the engine
      • 2.3 Precautions for transportation
      • 2.4 Precautions for the battery
      • 2.5 Precautions for towing
    • 3. Precautions for Servicing
      • 3.1 Precautions before servicing
      • 3.2 Precautions during servicing
    • 4. Safety Messages (Warning Labels)
      • 4.1 Location of warning labels
    • OPERATION
    • 1. Identification of Important Parts
      • 1.1 Overview of the machine
      • 1.2 Controls and switches
    • 2. Description of Control Devices
      • 2.1 LCD Monitor
      • 2.2 Switches
      • 2.3 Control levers and pedals
      • 2.4 Engine hood rear cover
      • 2.5 Bonnet B
      • 2.6 Bonnet R
      • 2.7 Operator’s seat bottom cover
      • 2.9 Tool storage
      • 2.10 Drink holder
      • 2.11 Utility box (for the canopy type only)
      • 2.12 Windshield (for cabin)
      • 2.13 Emergency escape hammer (for the cabin type only)
      • 2.14 Operator’s seat
      • 2.15 Ash tray (for cabin)
      • 2.16 Work Lights
      • 2.17 Air outlet (for cabin)
      • 2.18 Right window glass (for cabin)
      • 2.19 Cabin side door
      • 2.20 Replenishment of windshield washer fluid
      • 2.21 Fuse
      • 2.22 External power outlet
    • 3. Operating Instructions
      • 3.1 Checking before starting the engine
      • 3.2 Starting up the engine
      • 3.3 Operating and checking instructions after starting the engine
      • 3.4 Traveling
      • 3.5 Steering
      • 3.6 Stopping the machine
      • 3.7 Swinging the upperstructure
      • 3.8 Operating the implements
      • 3.9 Precautions for operating the implement
      • 3.10 Precautions for working
      • 3.12 Escaping from the mud
      • 3.13 Operations using the bucket
      • 3.14 Handling quick coupler (option)
      • 3.15 Parking the machine
      • 3.16 Inspection requirements after completing operation
      • 3.17 Stopping the engine
      • 3.18 Inspection requirements after stopping the engine
      • 3.19 Locking
      • 3.20 Handling the rubber track (for rubber track type)
      • 3.21 Handling hydraulic P.T.O
    • 4. Transportation
      • 4.1 Loading and unloading the machine
      • 4.2 Precautions for loading the machine
      • 4.3 Precautions for transporting the machine
      • 4.4 Suspending the machine
    • 5. Care and Service in Cold Weather
      • 5.1 Preparing for cold weather
      • 5.2 Precautions after a day's work
      • 5.3 After cold weather ends
    • 6. Long-term Storage
      • 6.1 Before storing
      • 6.2 Storing
      • 6.3 Using the machine again
    • 7. Troubleshooting
      • 7.1 Phenomena that are not breakdowns
      • 7.2 Towing
      • 7.3 If the battery is overdischarged
      • 7.4 Troubleshooting
    • MAINTENANCE
    • 1. Precautions for Servicing
    • 2. Basic Servicing Practices
      • 2.1 Oils, fuel, and cooling water
      • 2.2 Electrical equipment
      • 2.3 Hydraulic system
    • 3. Consumables
      • 4.1 Fuel and oil
      • 4.2 Cooling water
      • 5.1 Required tools
      • 5.2 Torque table
    • 7. Maintenance Table
      • 7.1 Table of service time intervals
      • 7.2 Service intervals when using the hydraulic breaker
    • 8. Procedures for Maintenance
      • 8.1 First services
      • 8.2 Nonperiodic services
      • 8.3 Checking before start-up
      • 8.4 Maintenance every 50 service hours
      • 8.5 Maintenance every 100 service hours
      • 8.6 Maintenance every 250 service hours
      • 8.7 Maintenance every 500 service hours
      • 8.8 Maintenance every 1000 service hours
      • 8.9 Maintenance every 1500 service hours
      • 8.10 Maintenance every 2000 service hours
      • 8.11 Maintenance every 3000 service hours
    • SPECIFICATIONS AND DIMENSIONAL DIAGRAMS
    • OPTIONAL PARTS AND ATTACHMENTS
    • 1. General Precautions
      • 1.1 Safety precautions
      • 1.2 Precautions for mounting an attachment (implement)
    • 2. Handling Air Conditioner
      • 2.2 How to use air conditioner
      • 2.3 Maintenance, inspection and servicing of air conditioner
    • APPENDIX TABLE
      • 1. List of consumables
      • 2. Fuel, oil and cooling water
      • 3. Required tools
      • 4. Torque table
      • 5. List of safety parts

Mustang PDF Manuals

Related Manuals

0
0
Your Cart
Your cart is emptyReturn to Shop