$ 0
0
$ 0
0

Mustang 2066, 2076 and 2086 Skid Steer Loader Operator Manual (917326D)

Format: PDF (Printable Document)

File Language: English

File Size: 3.12 MB (Speed Download Link)

Brand: Mustang

Models: 2066, 2076 and 2086

Machine Type: Skid Steer Loader

Publication No.: 917326 (Rev. D)

Edition Date: January 2012

Type of Document: Operator Manual (operation, controls, safety and routine maintenance)

Searchable: Yes, text is searchable and copyable

Delivery: Instant download after payment

Categories: ,

$ 40

Share:

Mustang 2066, 2076 and 2086 Skid Steer Loader Operator Manual (917326D)

A skid steer loader does the pushing, lifting and carrying on most small job sites, and the 2066, 2076 and 2086 are the Mustang models this book covers. The operator manual is for the person in the seat: what the controls do, how to start and run the machine, and what to check before and after the day's work.

If you are taking over one of these loaders, or one showed up without its book, this is publication 917326 (Rev. D), edition date January 2012, in English. It covers all three models in one manual.

What this manual helps you do

  • Start with the Safety chapter, which has the Mandatory Safety Shutdown Procedure, Safety Reminders and Potential Hazards, plus the ANSI-style and ISO-style safety decals inside the ROPS/FOPS and in the engine compartment.
  • Operate the loader with the help of the sections on the Operator Restraint Bar, Safety Interlock System, Parking Brake, Joystick Controls, Hand/Foot Controls and Auxiliary Hydraulic Controls.
  • Check the machine before you turn the key using the Before Starting the Engine and Fuel sections, and use the Maintenance Log to keep track of service.
  • Look up Engine Oil, Engine Oil Filter and Engine Oil Pressure when you need fluid details, and the Loader and Dimensional Specifications when you need the machine's numbers.
  • Adjust chain tension by following the Adjusting Chain Tension section, and use the Engine Diagnostic Chart and Troubleshooting tables when the engine is not behaving.

Who this is for

Owner-operators and contractors who run a 2066, 2076 or 2086 will use it to train new hands and settle daily-check questions. Rental fleets and buyers of used loaders can use it to hand the machine over with the controls and safety gear explained.

Keep it in the cab and have new operators read the safety chapter before their first shift.

Preview of the Mustang 2066, 2076 and 2086 Skid Steer Loader Operator Manual (917326D) (PDF, sample pages)

Does this manual fit your machine?

Mustang models 2066, 2076 and 2086
Machine type Skid Steer Loader
Publication No. 917326 (Rev. D)
Edition date January 2012

Check the model and serial number on your machine’s serial plate before ordering.

What’s inside

  • Troubleshooting: Engine Diagnostic Chart; Engine Diagnostic Chart (cont.); Troubleshooting
  • Torque values: Torque Specifications
  • Maintenance intervals / schedule: Maintenance Log
  • Lubrication, oils, fluids and capacities: Engine Oil; Engine Oil Filter; Engine Oil Pressure
  • Technical specifications: Specifications; Loader Specifications; Dimensional Specifications
  • Adjustments and calibration: Adjustments; Adjusting Chain Tension

How this edition differs

Compared with Mustang 2066, 2076 and 2086 Skid Steer Loader Operator Manual (917083G):

This manual Other edition
Publication No. 917326D 917083G
Edition date January 2012 April 2008

Compared with Mustang 2066, 2076 and 2086 Skid Steer Loader Operator Manual (Italian):

This manual Other edition
Publication No. 917326D 917309D
Language English Italian

FAQ

Where do I find out what the safety decals mean?
The Safety chapter has a Safety Decals section. It shows the ANSI-style and ISO-style decals inside the ROPS/FOPS and in the engine compartment.

Does it explain the optional equipment on these loaders?
Yes, the Controls and Safety Equipment chapter has sections on the optional Heater, Heater and Air Conditioner and Two-Speed Drive. It also covers the Hydraglide™ Ride Control System and Attachment Mounting.

What do I open when the engine has a problem?
Go to the Engine Diagnostic Chart and the Troubleshooting section. The Torque Specifications section is there for the fastener values.

How does this edition differ from 917083G?
This is 917326D from January 2012, while 917083G is dated April 2008. Both are English manuals for the 2066, 2076 and 2086.

More books for this machine

📘 Show Index

Table of Contents:

  • Introduction
    • Loader Identification
    • Control/Indicator Symbols
      • Power Off
      • Power On
      • Engine Start
      • Battery Charge
      • Electrical Power
      • Worklight w/Tail Lights
      • Worklight
      • Safety Alert
      • Hazard Flasher
      • Fasten Seatbelt
      • Horn
      • Volume – Full
      • Volume – Half Full
      • Volume – Empty
      • H-L
      • High – Low
      • Neutral
      • Forward
      • Reverse
      • Parking Brake
      • Engine Air Filter
      • Engine Oil
      • Engine Oil Filter
      • Engine Oil Pressure
      • Fuel Filter
      • Engine Temperature
      • Hydraulic System
      • Hydraulic Oil Temperature
      • Hydraulic Oil Filter
      • Grease Lubrication Point
      • Glow Indicator Lamp
      • Diesel Fuel
      • Chaincase Oil
      • Clockwise Rotation
      • Counterclockwise Rotation
      • Fast
      • Slow
      • Ride Control
      • Engine Malfunction Shutdown
      • Bucket – Float
      • Bucket – Rollback
      • Bucket – Dump
      • Lift Arm – Lower
      • Lift Arm – Raise
      • Service Hours
      • Lift Point
      • Tie-Down
      • Diesel Water Separator
      • Power-A-Tach®
  • Safety
    • Mandatory Safety Shutdown Procedure
    • Safety Reminders
    • Potential Hazards
    • Safety Decals
      • New Decal Application
    • ANSI-Style Safety Decals inside the ROPS/FOPS
    • ANSI-Style Safety Decals in the Engine Compartment
    • ISO-Style (used Internationally) Safety Decals inside the ROPS/FOPS
    • ISO-Style (used Internationally) Safety Decals in the Engine Compartment
    • Product and Component Plate Locations
  • Controls and Safety Equipment
    • Guards and Shields
    • Operator Restraint Bar
    • Operator’s Seat
      • Figure 1 Operator’s Seat
    • Upper-Torso Restraint
    • Safety Interlock System
      • Hydraloc™
      • Testing the Safety Interlock System
    • ROPS/FOPS
    • Parking Brake
      • Figure 2 Parking Brake Switch
    • Horn
    • Rear Window Emergency Exit
    • Lift Arm Support Device
      • Engagement
        • Figure 3 Lift Arm Support Device Engaged
      • Disengagement
        • Figure 4 Lift Arm Support Device Storage Location
    • Accessory Plug
    • Dome Light
    • Work Lights
    • Heater (optional)
    • Heater and Air Conditioner (optional)
      • Figure 5 Heater/ Air Conditioner Controls
    • Engine Speed Control
      • Figure 6 Hand Throttle
      • Figure 7 Foot Throttle (Joystick control units)
    • Two-Speed Drive (optional)
    • Hydraglide™ Ride Control System
    • Attachment Mounting
      • Multi-Tach™ Hitch
        • Figure 8 Multi-Tach™ Hitch
      • Power-A-Tach® Hitch
        • Figure 9 Power-A-Tach® Hitch
    • Instrument Panels
      • Figure 10 Left Panel
      • Left Panel
      • Right Panel
        • Figure 11 Right Panel
    • Joystick Controls
      • Figure 12 Joystick Controls
      • Drive Controls
      • Lift/Tilt Control
    • Hand/Foot Controls
      • Figure 13 Hand/Foot Controls
      • Drive Controls
      • Lift/Tilt Controls
    • Auxiliary Hydraulic Controls
      • Standard-Flow Auxiliary Hydraulic Control
        • Figure 14 Electric Auxiliary Control
      • High-Flow Auxiliary Hydraulic Control (optional)
        • Figure 15 High-Flow Auxiliary Switch
  • Operation
    • Before Starting the Engine
    • Fuel
    • Starting the Engine
    • Cold-Starting
    • Cold-Starting Procedure
    • Stopping the Loader
    • Parking the Loader
    • Jump-starting
    • Changing Attachments
      • Connecting Attachments
        • Figure 16 Manual Hitch – disengaged
        • Figure 17 Power Hitch – disengaged
      • Connecting Auxiliary Hydraulic Couplings
      • Removing Attachments
    • Self-Leveling
    • Using a Bucket
      • Driving over Rough Terrain
      • Driving on an Incline
      • Digging with a Bucket
        • Figure 18 Digging
      • Loading a Bucket
        • Figure 19 Loading
      • Dumping the Load onto a Pile
      • Dumping the Load into a Truck (or Hopper)
        • Figure 20 Dumping into a Truck (or Hopper)
      • Dumping the Load over an Embankment
      • Scraping with a Bucket
        • Figure 21 Scraping
      • Leveling the Ground
        • Figure 22 Leveling the Ground
    • Vibration Information
    • Vibration Measurement and Actions
      • Vibration Levels
        • Figure 23 – Vibration measurement axes
    • Highway Travel
    • Storing the Loader
    • Removing Loader from Storage
    • Transporting the Loader
      • Figure 24 Front Tie-Down/Front Retrieval
        • Figure 25 Rear Tie-Down/Rear Retrieval
    • Lifting the Loader
      • Figure 26 Single-Point Lift Eye
        • Figure 27 Front Four-Point Lift Eyes
        • Figure 28 Right Rear Four-Point Lift Eye (Left same)
  • Service
    • Dealer Services
    • Replacement Parts
    • Loader Raising Procedure
      • Figure 29 Loader Properly Blocked (Tires and wheels removed to show blocks)
    • Loader Lowering Procedure
    • Engine Compartment Access
      • Figure 30 Engine Compartment Access Door and Cover
    • Tilting Back the ROPS/FOPS
      • Figure 31 ROPS/FOPS Lock Mechanism – Engaged
    • Adjustments
      • Control Handles
    • Removing Foreign Material
    • Lubrication
      • Figure 32 Service Locations
    • Chaincases
      • Checking and Adding Oil
        • Figure 33 Fill Plug Location
      • Draining Oil
        • Figure 34 Drain Plug
    • Drive Chains
      • Checking Chain Tension
      • Adjusting Chain Tension
    • Engine Air Cleaner
      • Figure 35 Dual-Element Air Cleaner
      • Access
      • Outer Element
      • Inner Element
      • Reinstallation
    • Engine Service
      • Figure 36 Engine Service Components
      • Checking Engine Mounting Hardware
      • Checking Engine Oil Level
      • Changing Engine Oil and Filter
        • Figure 37 Remote Engine Oil Drain
      • Changing Fuel Filter
      • Checking the Water Separator
    • Engine Diagnostic Chart
      • Figure 38 Flashing Patterns of the Failure Lamp
      • Engine Diagnostic Chart (cont.)
    • Hydraulic System
      • Checking Hydraulic Oil Level
        • Figure 39 Sight Gauge and Fill Tube
      • Changing Hydraulic Oil Filter
        • Figure 40 Hydraulic Oil Filter and Indicator
      • Changing Hydraulic Oil
    • Bucket Cutting Edge
    • Alternator/Fan Belt
    • Wheel Nuts
    • Lift Arm Pivots
    • Cooling System
      • Cleaning the Cooling System
    • Tires
      • Checking Tire Pressure
    • Heater/Air Conditioner Filters
    • Electrical System
      • Fuse Panel
      • Battery
  • Troubleshooting
  • Maintenance
    • Maintenance Log
  • Specifications
    • Loader Specifications
    • Standard Features
    • Optional Features
    • Dimensional Specifications
      • 67.5 in (1715 mm), 16.8 cu. ft. (0.48 m3) Earth and Foundry with High Back Bucket w/12 x 16.5 Tires inches mm
      • 75 in (1905 mm), 18.2 cu. ft. (0.52 m3) Earth and Foundry with High Back Bucket w/12 x 16.5 Tires inches mm
    • Capacities and Ratings
      • 2066/2076/2086 (2076 EU/2086 EU)
    • Common Materials and Densities
    • Bucket Selection
  • Torque Specifications
  • Warranty
    • MUSTANG WARRANTY SERVICE INCLUDES
    • MUSTANG WARRANTY DOES NOT INCLUDE
  • Index

Mustang PDF Manuals

Related Manuals

0
0
Your Cart
Your cart is emptyReturn to Shop