Before anyone drives one of these loaders off my lot, I want them to have read the Mandatory Safety Shutdown Procedure and the Before Starting pages. Both are in this manual, under the Safety chapter, along with the 2-Post ROPS/FOPS Warning and the sections on fire hazards and crystalline silica exposure.
This is the operator manual for the Mustang AL106, AL206, AL306, AL406 and AL506 articulated loaders. It also covers the Manitou MLA-1, MLA-3, MLA-4 and MLA-5, which are the same machines sold under that name. It is publication number 50940661, Rev. B, dated February 2020, and applies to 106 SN 11257 and up, 206 (EU) SN 21244 and up, 306 SN 31365 and up, 406 (EU) SN 41250 and up, and 506 SN 51242 and up. It suits a used machine that arrived without its book, or a new customer taking one over.
What this manual helps you do
- Start with the Safety chapter, which has Before Starting, During Operation and the Mandatory Safety Shutdown Procedure.
- Check the Maintenance Schedule and keep the Maintenance Log up to date as the machine works.
- Look up oils, coolant and capacities under Fluid Capacities/Lubricants and the Coolant Compound Table.
- Adjust the V-belt by following the steps for Checking and Adjusting V-belt Tension.
- Follow the Transporting the Machine and Lifting the Machine with a Crane sections when the loader has to move between sites.
Who this is for
Rental fleet managers and dealers who hand these loaders to new operators will find the safety, Using Attachments and Component Identification sections useful at handover. Owner-operators and buyers of used machines can use the maintenance and fluid pages to keep an AL or MLA loader on schedule.
Print the Maintenance Log pages and keep them with the machine so every renter sees the service record.
Preview of the Mustang AL106, AL206, AL306, AL406 and AL506, Manitou MLA-1, MLA-3, MLA-4 and MLA-5 Articulated Loader Operator Manual (50940661B) (PDF, sample pages)
Does this manual fit your machine?
| Mustang models |
AL106, AL206, AL306, AL406 and AL506 |
| Manitou models |
MLA-1, MLA-3, MLA-4 and MLA-5 |
| Machine type |
Articulated Loader |
| Publication No. |
50940661 (Rev. B) |
| Edition date |
February 2020 |
| Serial numbers |
106 SN 11257 and Up; 206 (EU) SN 21244 and Up; 306 SN 31365 and Up; 406 (EU) SN 41250 and Up; 506 SN 51242 and Up |
Check the model and serial number on your machine’s serial plate before ordering.
What’s inside
- Troubleshooting: Troubleshooting
- Torque values: Torque Specifications
- Maintenance intervals / schedule: Maintenance Schedule; Maintenance Log
- Lubrication, oils, fluids and capacities: Fluid Capacities/Lubricants; SAE (Domestic) Weights and Capacities Models 506, 306, MLA-5, and ML; ISO 6016 (EU) Weights and Capacities Models 506, 406, 306, MLA-5, MLA-4, and ML
- Technical specifications: Specifications; SAE (Domestic) Weights and Capacities Models 506, 306, MLA-5, and ML; ISO 6016 (EU) Weights and Capacities Models 506, 406, 306, MLA-5, MLA-4, and ML
- Adjustments and calibration: Checking and Adjusting V-belt Tension
FAQ
Where do I find weights and capacities for my model?
They are listed by model group in the Specifications chapter. The 506, 306 and MLA-5 have an SAE (Domestic) table, and the 106 and 206 have their own tables.
Which section helps when something on the machine is not working?
Open the Troubleshooting section. For belt problems, Checking and Adjusting V-belt Tension gives the adjustment procedure.
Does this cover the Manitou MLA models?
Yes, it covers the MLA-1, MLA-3, MLA-4 and MLA-5 alongside the Mustang AL models. The serial number ranges for the AL machines are listed with the book's details.
Where are the torque values and the engine data?
Torque Specifications has the torque values. Engine, Hydraulics, Electrical System and Wheel/Tire Sets each have their own heading in the Specifications chapter.
📘 Show Index
Table of Contents:
- General Information
- Safety Symbol
- Contents and Use of this Manual
- Ownership Change
- Manufacturer Information
- Machine Designation
- Serial Number Plate Location
- Loader Information
- Proper Machine Use
- Using Attachments
- Component Identification
- Service/Dealership Network
- Vibration Information
- Vibration Measurement and Actions
- Vibration Levels
- Safety
- 2-Post ROPS/FOPS Warning
- Mandatory Safety Shutdown Procedure
- Before Starting
- During Operation
- Provision for Stability/Avoiding Rollover Accidents
- Electrical Energy
- Service Safety Practices
- Fire Hazards
- Crystalline Silica Exposure
- Transporting the Machine
- Lifting the Machine with a Crane
- Hazard and Hazard Avoidance Symbols
- Safety Decals
- New Decal Application
- ANSI-Style and Common Safety Decal Locations
- ISO-Style Safety Decal Locations
- Specifications
- Fluid Capacities/Lubricants
- Maximum Slopes of Engine Operation
- SAE (Domestic) Weights and Capacities Models 506, 306, MLA-5, and ML
- ISO 6016 (EU) Weights and Capacities Models 506, 406, 306, MLA-5, MLA-4, and ML
- SAE (Domestic) Weights and Capacities Models 106 and ML
- ISO (EU) Weights and Capacities Models 106, 206, and ML
- Engine
- Coolant Compound Table
- Hydraulics
- Electrical System
- Sound Levels
- Wheels
- Wheel/Tire Sets
- ROPS and FOPS
- Vibration Levels
- Models 506, 406, MLA-5, and MLA-4 Dimensions
- Models 306, 206, and MLA-3 Dimensions
- Models 106 and MLA-1 Dimensions
- Standard Features
- Optional Features
- Common Materials and Densities
- Operation
- Operating Controls
- Controls and Switches
- Instrument Panel and Indicators
- Cab Controls (Cab only)
- Warning Indicators
- Operator’s Seat Adjustment
- Seat Belt
- Ignition Key Switch
- Steering Column Adjustment
- Control Lever
- Hand Throttle
- 12V Accessory Power Outlet
- Operation
- Pre-Operation Checklist
- 2-Post ROPS
- 4-Post ROPS Side Gates (Option)
- Entering and Exiting
- Engine Start
- Engine Shut Down
- Warm-up
- New Machines
- Driving on Public Roads
- Lift Arm Down-Stop
- Load Handling
- Parking the Loader
- Multi-purpose Joystick
- All models except 506 and MLA-5 Self- Leveling Feature
- Attachments
- General Instructions
- Connect/Disconnect Attachments
- Auxiliary Hydraulics
- Operating Attachments
- Bucket
- Towing the Loader
- Towing Models 106 and ML
- Towing Models 306 and ML
- Towing Models 506, 406, MLA-4 and ML
- Loading and Transporting
- Maintenance
- Maintenance Schedule
- Check, Clean and Inspect
- Leakage Check
- Lubrication and Filter Changes
- Functional Check
- Dealer Service
- Tilting the Platform
- Tilting Up the Platform
- Tilting the Platform Down
- Engine Maintenance
- Engine Oil
- Air Cleaner
- Engine Cooling System
- Fuel System
- Changing Fuel Filter
- Water Separator Maintenance
- Checking and Adjusting V-belt Tension
- Air Conditioning Maintenance
- Windshield Washer Reservoir (Cab Only)
- Hydraulic System Maintenance
- Hydraulic Hose Maintenance
- Planetary Axles
- Changing Planetary Axle Oil
- Brake Fluid Reservoir (Models 506, 406, 306, MLA-5, MLA-4, and MLA-3)
- Checking Brake Fluid Reservoir Level
- Wheels and Tires
- Lubrication
- Electrical System
- Fuses
- Control Modules
- Battery
- Storing the Loader
- Before Storage
- After Storage
- Final Shutdown / Decommissioning
- Before Disposal
- Machine Disposal
- Maintenance Log
- Troubleshooting
- Index
Mustang PDF Manuals