New Holland 810LA, 815LA, 830LA, 835LA, 850LA, 855LA, 857LA, 910LA, 915LA, 917LA, 935LA, 937LA, 975LA Farm Loader Index:

• 1. Introduction
  • 1.1. Necessary additional documentation
  • 1.2. Identification
    • 1.2.1. Model and serial number
  • 1.3. Alignment reference
  • 1.4. Setting joystick position
  • 1.5. Subframe identification
  • 1.6. Subframe identification DM/DL/DLM/DXL
• 2. Description and definitions
  • 2.1. Description
  • 2.2. Definitions
    • 2.2.1. Third/fourth hydraulic function
    • 2.2.2. Live3 (active third hydraulic function)
    • 2.2.3. Implement lock
    • 2.2.4. Hydro Quick / Multi-coupler MC4
    • 2.2.5. Single couplers
    • 2.2.6. Multicoupler 2 (MC2)
    • 2.2.7. Lock & Go
    • 2.2.8. Position indicator
    • 2.2.9. Compact Valve Unit (CVU)
    • 2.2.10. Hydraulic implement connection, Multi-coupler
    • 2.2.11. Hose kit
    • 2.2.12. Soft Ride, Load Damping System
    • 2.2.13. Material buckets
    • 2.2.14. Heavy Duty Material Buckets
    • 2.2.15. Construction Tooth Buckets
    • 2.2.16. Light Material/ Snow Buckets
    • 2.2.17. Fork Lifts
    • 2.2.18. Log Grab Attachment for Fork Lifts
    • 2.2.19. Bale spike
    • 2.2.20. Big Bale Fork / with Backstop
    • 2.2.21. Grapple with optional backscreen
    • 2.2.22. Flexigrip 160, 200
    • 2.2.23. Quadrogrip 200
    • 2.2.24. Weld on Hook Set
    • 2.2.25. Systems DM, DL and DXL
    • 2.2.26. Mechanical Self Levelling loader, MSL
    • 2.2.27. Non-Self Levelling loader, NSL
    • 2.2.28. Tool carrier
    • 2.2.29. Implement
    • 2.2.30. Implement hooks
• 3. Safety instructions
  • 3.1. General information
    • 3.1.1. Guards
    • 3.1.2. Warning, prohibition and information decals.
  • 3.2. Explanation of warning levels
    • 3.2.1. Symbol explanation
    • 3.2.2. Responsibility
  • 3.3. Installing the loader
  • 3.4. Joystick operation
  • 3.5. Protection equipment
    • 3.5.1. Service
    • 3.5.2. Welding
    • 3.5.3. Safety belt
    • 3.5.4. ROPS, Rollover protection structure
  • 3.6. Operation
    • 3.6.1. Before work
    • 3.6.2. Operator/driver location
    • 3.6.3. Connecting implement
    • 3.6.4. Workplace
    • 3.6.5. Stability
    • 3.6.6. Tractor stability
  • 3.7. Risk factors
    • 3.7.1. During transport and work
    • 3.7.2. During service
    • 3.7.3. After work
  • 3.8. Replacement parts
  • 3.9. Location of warning, prohibition and information decals (EU)
  • 3.10. Location of warning, prohibition and information decals (NAFTA)
  • 3.11. Location of safety signs on implements
• 4. Installation – subframe
  • 4.1. Installation preparation – subframe
  • 4.2. Installation – subframe on tractor
  • 4.3. Installation checks – subframe installation
• 5. Installation – Front Loaders
  • 5.1. Installation Preparation, Front Loaders
    • 5.1.1. Lock & Go
    • 5.1.2. Position indicator
  • 5.2. Connection – Front loader with subframe
    • 5.2.1. Connecting the loader using lifting equipment
    • 5.2.2. Coupling a parked loader
  • 5.3. Checking front loader installation
  • 5.4. Disconnecting-Front loader with subframe
    • 5.4.1. Unhitching the loader using lifting equipment
    • 5.4.2. Disconnecting the loader
• 6. Installation – Control system
  • 6.1. Hose kit
  • 6.2. Compact Valve Unit, CVU
    • 6.2.1. CVU equipped with: Basic NSL (no extra functions)
    • 6.2.2. CVU equipped with: Soft Ride + shock valves (tilt)
    • 6.2.3. CVU equipped with: Third hydraulic function
    • 6.2.4. CVU equipped with: Third function + Soft Ride
    • 6.2.5. CVU equipped with: Third function + hydraulic implement lock
    • 6.2.6. CVU equipped with: Third function + Soft Ride + hydraulic implement lock
    • 6.2.7. CVU equipped with: Third and fourth hydraulic functions
    • 6.2.8. CVU equipped with: Live3
    • 6.2.9. CVU equipped with: Live3 + Soft Ride + shock valves (tilt)
    • 6.2.10. CVU equipped with: Live3 + hydraulic implement lock
    • 6.2.11. CVU equipped with: Live3 + Soft Ride + hydraulic implement lock
    • 7.0.12. The tractor’s own joystick
• 7. Service – general
• 8. Service – subframe
• 9. Service – Front loaders
  • 9.1. Lubrication
  • 9.2. Tool carrier
  • 9.3. Loaders
    • 9.3.1. Pins and bushings
    • 9.3.2. Tool carrier, replacing pins and bushings
    • 9.3.3. Replacing the pins and bushings, triangular link
    • 9.3.4. Replacing pins and bushings, lift cylinder and bearing box
  • 9.4. Bearing box
• 10. Service – Loader hydraulics
  • 10.1. Hydraulic system
  • 10.2. Hoses and connectors
    • 10.2.1. Replacing hoses or connectors
  • 10.3. Main hose kit
  • 10.4. Boom suspension
    • 10.4.1. Replacing accumulators
  • 10.5. Compact Valve Unit (CVU) with associated function modules
    • 10.5.1. Module CB01 connecting block ”Basic”
    • 10.5.2. Module CB03 connecting block ”Soft Ride”
    • 10.5.3. Module CB04 connecting block ”Tilt”
    • 10.5.4. Module SV01 selector valve Third hydraulic function
    • 10.5.5. Module SV02 selector valve fourth hydraulic function
    • 10.5.6. Module IL01 Hydraulic lock valve
• 11. Service – Cylinders
  • 11.1. Tilt cylinder – Mechanical Self Levelling loader, (MSL)
    • 11.1.1. Tilt cylinder disassembly
    • 11.1.2. Removing the piston
    • 11.1.3. Remove the piston seals
    • 11.1.4. Remove the top nut seals
    • 11.1.5. Remove the bottom guide seals
    • 11.1.6. Installing new sealing components on the piston
    • 11.1.7. Installing new sealing components on the top nut
    • 11.1.8. Installing new sealing components on the bottom guide
    • 11.1.9. Installing the top nut, piston and bottom guide on the piston rod
    • 11.1.10. Final assembly – tilt cylinder
  • 11.2. Tilt cylinder – Non-Self Levelling loader (NSL)
    • 11.2.1. Tilt cylinder disassembly
    • 11.2.2. Removing the piston
    • 11.2.3. Remove the piston seals
    • 11.2.4. Remove the top nut seals
    • 11.2.5. Installing new sealing components on the piston
    • 11.2.6. Installing new sealing components on the top nut
    • 11.2.7. Installing the bearing and the piston on the piston rod
    • 11.2.8. Final assembly – tilt cylinder
  • 11.3. Lift cylinder
    • 11.3.1. Tilt cylinder disassembly
    • 11.3.2. Removing the piston
    • 11.3.3. Remove the piston seals
    • 11.3.4. Remove the top nut seals
    • 11.3.5. Installing new sealing components on the piston
    • 11.3.6. Installing new sealing components on the top nut
    • 11.3.7. Installing the bearing and the piston on the piston rod
    • 11.3.8. Final assembly – lift cylinder
• 12. Troubleshooting
  • 12.1. Troubleshooting table – loaders
    • 12.1.1. CVU
• 13. Tightening torques
  • 13.1. Tightening torques
    • 13.1.1. Table – Tightening torque
• 14. Storage
• 15. Specifications
  • 15.1. Mechanical self levelling, MSL
  • 15.2. Non self levelling, NSL
• 16. Wiring diagram
  • 16.1. Wiring diagram – Loader
  • 16.2. Wiring diagram -Loader with Live3
  • 16.3. Wiring diagram – Loader with all hydraulic functions