Description
Volvo SD115B, S135B Roller Operator’s Manual
Volvo SD115B, S135B Roller Index:
Presentation
Intended use
Environmental requirements
Machine
Operator’s station
Emergency exit
Engine
Auto idle shutdown
AdBlue®/DEF information
Exhaust aftertreatment system
Propulsion
Drum
Vibration
Vibration frequency
Brake system
Levelling blade
Frame
Vandal cover
Electrical system
Cab
FOPS and ROPS
Instruments and controls, overview
Additional Icons
International symbols
Machine view
Directional terms
CE-marking, EMC-directive
EU Directives
Declaration of Conformity
Communication equipment, installation
Protection against electromagnetic interference
Protection against electromagnetic interference
Guidelines for installing antenna
Safety components
Safety-classified machine and spare parts
Examples of safety-classified machine parts/spare parts
Product plates
Product identification number
PIN product plate
Engine identification plate
Information and warning decals
North American decals
International decals
Instrument panels
Instrument panels
Display unit
Initial display
Display sections
Instrument cluster
Operating display
Indicators
Antitheft screen
Wrong code
Too many wrong codes. Time to next attempt:
Antitheft misconfigured. Contact Service.
Main screen
Main screen 1
Main screen 2
Indicator icons
Message
Seat not occupied
Seat belt
Parking brake
Vibration active
Battery
Engine oil pressure
Hydraulic oil temperature
AdBlue®/DEF
Preheater
Engine air filter
Exhaust system temperature
Regeneration needed
Service
Impact meter
Alarm texts
Information
Check
Warning
Main menu
Cycle information menu
Work timer
Current fuel cons.
Average fuel cons.
Engine menu
Oil pressure
Coolant temperature
Charge air temperature
Fan reverse
Interval selection
DPF regeneration
Hydraulics menu
Oil temperature
Electrical system menu
Battery voltage
Machine information menu
Machine model
Serial number
Service menu
Service messages, turn on and off
Setup menu
Units
Language
Time / date
Display brightness
Keypad brightness
Machine messages menu
Shutdown screen
Instrument panel, cab post
Cab post panel
Instrument panel, right
Keypad
Other controls
Controls
Levelling blade
Road lights
Battery disconnect switch
Hood control
ROPS
Work lights
Work lights
Cab
Cab interior
Operator comfort
Beacon light (if equipped)
Operator seat
Height and weight adjustment
Armrest angle adjustment
Backrest angle adjustment
Seat cushion horizontal adjustment
Cushion tilt adjustment
Seat horizontal adjustment
Seat lateral adjustment
Seat rotation adjustment
Seat belt
Operator’s manual, storage
ROPS
Cab
Climate control system
Cab climate control
Operating instructions
Safety rules when operating
Danger zone
Safety, general
Selection and qualification of personnel
Organisational measures
Mandatory safety measures
Pre-start inspection
Safety when working in dangerous areas
Safety when starting
Safety when operating
Emergency cab exit
Machine operator safety
Safety when boost starting
Safety when stopping
Safety when transporting, towing and roading
Securing the machine for transport
Safety when operating on public roads
Electrocution hazard
Power lines, minimum clearance
Minimum clearance from overhead power lines
Keep the following in mind to ensure safety when operating:
If the machine comes in contact with overhead power lines:
Measures before operating
Perform these checks and actions before operating
Actions before starting the engine
Starting engine
Auto idle shutdown
Actions before operating while engine is running
Vibration
Operating the machine’s vibration controls
Selecting automatic and manual vibration (option)
Selecting drum vibration amplitude
Selecting drum vibration frequency (option)
Operating
Propulsion control lever
Traction control
Exhaust aftertreatment system
Exhaust aftertreatment system
Parked regeneration
Delaying regeneration
Measures after operating
Actions after operating
Parking
Storage
Short term
Long term
Prepare machine for use following storage
Retrieving and towing
Towing a disabled machine
Bypassing the propulsion pump, releasing the brakes and towing the machine
Raising the operator’s platform
Connecting a portable hydraulic pump
Lowering the operator’s platform
Restoring operation of the propulsion pump and applying the brake
Raising the operator’s platform
Lowering the operator’s platform
Towing a disabled machine
Bypassing the propulsion pump, releasing the brakes and towing the machine
Raising the operator’s platform
Using the tow valve option
Connecting a portable hydraulic pump
Lowering the operator’s platform
Restoring operation of the propulsion pump and applying the brake
Raising the operator’s platform
Lowering the operator’s platform
Transporting machine
Loading the machine under its own power
Securing the machine to the transporter
Lifting machine
Operating techniques
Eco driving
Attachments, connecting and disconnecting
Signalling diagram
Safety when servicing
Service position
Before service, read
Prevent personal injuries
Prevent machine damage
Prevent environmental influence
Safety during maintenance
Security
General
Electrical
Hydraulic
Oils
Suffocation hazard
Safety when welding
Some simple rules regarding tyre handling
Fitting of tyres and rims
Repairing tyres and rims
Preparations before service
Steering joint lock
Fire prevention
Fire prevention actions
Actions in case of fire
Checklist after a fire or heat exposure
Handling hazardous materials
Safety when handling hazardous materials
Battery disposal
Refrigerant
Environmental precautions
Safety precautions
Actions in case of exposure
Health hazards with paint, plastics and rubber
Work on painted surfaces
The following safety actions shall be followed:
Rubber and plastics
The following safety instructions shall be followed:
Fluoro rubber
Decontamination
Asbestos information
Maintenance
Lubrication and service chart
Symbol key
Lubrication and service chart
Checks, oil changes and lubrication
Maintenance service, first 100 hours
Maintenance service, every 10 hours
Maintenance service, every 50 hours
Maintenance service, every 500 hours
Maintenance service, every 1000 hours
Maintenance service, every 2000 hours
Maintenance service, every 3000 hours
Maintenance service, every 6000 hours
Maintenance service, every 8000 hours
Maintenance service, when required
Maintenance service, every 10 hours
Seat belt
Water separator, checking
Engine air cleaner system integrity, checking
Coolant level, checking
Engine oil level, checking
Maintenance service, every 50 hours
Leakage, checking
Parking brake function, checking
Battery system integrity, checking
Hydraulic oil level, checking
Drum eccentric oil level, checking
Drum carrier oil level, checking
Drum drive planetary oil level, checking
Tyres, checking air pressure
Engine air cleaner primary filter, cleaning
Drum shock mounts, checking
Maintenance service, every 500 hours
Drum carrier breather, cleaning
Axle breather, cleaning
Axle breathers, cleaning
Cooling system integrity, checking
Cab prefilter, cleaning
Cab main filter, cleaning
Axle breather filter, cleaning
Maintenance service, every 1000 hours
Engine belt condition, checking
Engine belt tension, checking
Cab prefilter, replacing
Engine air cleaner primary filter, replacing
Maintenance service, when required
Fuel, filling
AdBlue®/DEF, filling
Cleaning machine
Recommendations for cleaning the machine
After cleaning:
Touch-up painting
Cleaning engine compartment
Radiator and coolers, cleaning
Hydraulic oil, filling
Engine oil, filling
Coolant, filling
Axle oil, filling
Axle oil, filling
Axle hub oil, filling
Drum carrier oil, filling
Drum eccentric oil, filling
Planetary drive oil, filling
Drum and scraper, checking
Drum scraper setting
Specifications
Recommended lubricants
General information
Engine oil
Eccentric and Carrier oil
Coolant
Hydraulic oil, specifications
Fuel system
Fuel
Fuel recommendations for EU-certified engines (with recirculation of exhausts (EGR) and aftertreatment of exhausts) for models from year 2011.
Fuel recommendations for USA-certified engines (with recirculation of exhausts (EGR) and aftertreatment of exhausts) for models from year 2011.
Alternative fuels
Hydro-treated vegetable oil (HVO)
Biodiesel
Biodiesel fuel requirements
Maintenance interval requirements
Effects of biodiesel on engine oil
Effects of biodiesel on fuel systems
Effects of biodiesel on exhaust after-treatment systems
Effects of biodiesel on cold weather operation
Effects of biodiesel on emissions compliance
Service capacities and change intervals
Engine
Engine, specifications
Electrical system
Electrical system, specifications
Fuses
Relays
Brake
Brake system, specifications
Steering
Steering system, specifications
Wheels
Tyres, specifications
Drum
Drum vibration, specifications
Drum vibration, specifications
Cab
Refrigerant
Noise and vibrations
Vibration values
Hydraulic system
Hydrostatic drive, specifications
Hydrostatic drive, specifications
Machine weights
Machine weights
Machine weights
Dimensions
Machine dimensions
Padfoot drum machine
Machine dimensions
Padfoot drum machine
Service history
Alphabetical index