Komatsu D375A-3 Bulldozer Index:

• COVER
• 1. FOREWORD
• 2. SAFETY INFORMATION
• 3. INTRODUCTION
• 4. LOCATION OF PLATES,TABLE TO ENTER SERIAL NO. AND DISTRIBUTOR
• 5. CONTENTS
• SAFETY
  • 6. GENERAL PRECAUTIONS
  • 7. PRECAUTIONS DURING OPERATION
    • 7.1 BEFORE STARTING ENGINE
    • 7.2 AFTER STARTING ENGINE
    • 7.3 TRANSPORTATION
    • 7.4 BATTERY
    • 7.5 TOWING
  • 8. PRECAUTIONS FOR MAINTENANCE
    • 8.1 BEFORE CARRYING OUT MAINTENANCE
    • 8.2 DURING MAINTENANCE
  • 9. POSITION FOR ATTACHING SAFETY LABELS
    • 9.1 POSITION FOR ATTACHING SAFETY LABELS
    • 9.2 CONTENT AND USE OF WARNING PLATES
• OPERATION
  • 10. GENERAL VIEW
    • 10.1 GENERAL VIEW OF MACHINE
    • 10.2 GENERAL VIEW OF CONTROLS AND GAUGES
  • 11. EXPLANATION OF COMPONENTS
    • 11.1 FRONT PANEL
    • 11.2 SWITCHES
    • 11.3 CONTROL LEVERS AND PEDALS
    • 11.4 DUST INDICATOR
    • 11.5 POWER SOURCE
    • 11.6 FUSE BOX
    • 11.7 DOOR-OPEN LOCK (MACHINES EQUIPPED WITH CAB)
    • 11.8 SASH GLASS INTERMEDIATE LOCK (MACHINES EQUIPPED WITH CAB)
    • 11.9 DOOR POCKET (MACHINES EQUIPPED WITH CAB)
    • 11.10 ASHTRAY (MACHINES EQUIPPED WITH CAB)
    • 11.11 TOOL BOX
    • 11.12 HANDLING AIR CONDITIONER
    • 11.13 HANDLING ACCUMULATOR
  • 12. OPERATION
    • 12.1 CHECK BEFORE STARTING ENGINE
    • 12.2 STARTING ENGINE
    • 12.3 OPERATIONS AND CHECKS AFTER STARTING ENGINE
    • 12.4 MOVING MACHINE
    • 12.5 SHIFTING GEAR
    • 12.6 SHIFTING BETWEEN FORWARD AND REVERSE
    • 12.7 STEERING MACHINE
    • 12.8 STOPPING MACHINE
    • 12.9 PRECAUTIONS FOR OPERATION
    • 12.10 WORK POSSIBLE USING BULLDOZER
    • 12.11 RIPPER OPERATION
    • 12.12 ADJUSTMENT OF WORK EQUIPMENT
    • 12.13 PARKING MACHINE
    • 12.14 CHECK AFTER FINISHING WORK
    • 12.15 STOPPING ENGINE
    • 12.16 CHECK AFTER STOPPING ENGINE
    • 12.17 LOCKING
    • 12.18 TIPS FOR LONGER UNDERCARRIAGE LIFE
  • 13. TRANSPORTATION
    • 13.1 LOADING,UNLOADING WORK
    • 13.2 PRECAUTIONS FOR LOADING
    • 13.3 METHOD OF LIFTING MACHINE
    • 13.4 PRECAUTIONS FOR TRANSPORTATION
    • 13.5 REMOVAL OF CAB (MACHINES EQUIPPED WITH CAB)
    • 13.6 INSTALLATION OF CAB (MACHINES EQUIPPED WITH CAB)
  • 14. COLD WEATHER OPERATION
    • 14.1 PRECAUTIONS FOR LOW TEMPERATURE
    • 14.2 AFTER COMPLETION OF WORK
    • 14.3 AFTER COLD WEATHER
  • 15. LONG-TERM STORAGE
    • 15.1 BEFORE STORAGE
    • 15.2 DURING STORAGE
    • 15.3 AFTER STORAGE
  • 16. TROUBLESHOOTING
    • 16.1 AFTER RUNNING OUT OF FUEL
    • 16.2 METHOD OF TOWING MACHINE
    • 16.3 IF BATTERY IS DISCHARGED
    • 16.4 OTHER TROUBLE
• MAINTENANCE
  • 17. GUIDES TO MAINTENANCE
  • 18. OUTLINES OF SERVICE
    • 18.1 OUTLINE OF OIL,FUEL,COOLANT
    • 18.2 RELATING TO ELECTRIC SYSTEM
  • 19. WEAR PARTS LIST
  • 20. USE OF FUEL,COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE
  • 21. STANDARD TIGHTENING TORQUES FOR BOLTS AND NUTS
    • 21.1 INTRODUCTION OF NECESSARY TOOLS
    • 21.2 TORQUE LIST
  • 22. PERIODIC REPLACEMENT OF SAFETY CRITICAL PARTS
  • 23. MAINTENANCE SCHEDULE CHART
  • 24. SERVICE PROCEDURE
    • 24.1 INITIAL 250 HOURS SERVICE
    • 24.2 WHEN REQUIRED
    • 24.3 CHECK BEFORE STARTING
    • 24.4 EVERY 250 HOURS SERVICE
    • 24.5 EVERY 500 HOURS SERVICE
    • 24.6 EVERY 1000 HOURS SERVICE
    • 24.7 EVERY 2000 HOURS SERVICE
    • 24.8 EVERY 4000 HOURS SERVICE
• SPECIFICATIONS
  • 25. SPECIFICATIONS
• OPTIONS,ATTACHMENTS
  • 26. GENERAL PRECAUTIONS
    • 26.1 PRECAUTIONS RELATED TO SAFETY
  • 27. USING SEAT BELT
    • 27.1 FASTEN THE BELT AND REMOVE IT IN THE FOLLOWING MANNER
  • 28. SELECTION OF TRACK SHOE
    • 28.1 SELECTION OF TRACK SHOES
  • 29. PROCEDURE FOR SELECTING RIPPER POINT
    • 29.1 PROCEDURE FOR SELECTING RIPPER POINT
  • 30. HANDLING CAP WITH LOCK
    • 30.1 OPENING AND CLOSING LOCKABLE CAP
  • 31. EFFECTIVE METHOD OF OPERATION FOR DUAL TILT DOZER
    • 31.1 BLADE CONDITION
    • 31.2 DOZING WORK
    • 31.3 LEVELING (SPREADING) OPERATIONS
    • 31.4 DITCHING OPERATIONS
    • 31.5 BOULDER RAISING OPERATIONS
    • 31.6 SIDE-CUTTING OPERATIONS
    • 31.7 HORIZONTAL DOZING OPERATIONS FROM SIDE SLOPE (ROUGH GROUND)
  • 32. SHOE SLIP CONTROL
    • 32.1 MODE SELECTION SWITCH PANEL (SHOE SLIP CONTROL)
    • 32.2 EFFECTIVE USE OF MODE SELECTION SYSTEM
    • 32.3 IF MODE SELECTION SYSTEM FLASHES