CNH JOYSTICK STEERING WITH SECONDARY ELECTRICAL STEERING KIT Installation Instructions (92728832)

CNH JOYSTICK STEERING WITH SECONDARY ELECTRICAL STEERING KIT Installation Instructions (92728832)

Out in the field, this joystick steering kit’s usually going on tractors or harvesters that spend their lives in dust, mud, and tight headlands. This manual walks you through how to mount, route, and wire the secondary electrical steering so it actually tracks straight and doesn’t throw fault codes. Say you’ve added GPS guidance and need the joystick and backup steering to play nice with the existing column—these instructions help you trace the harness, align the sensors, and test the system before you send the machine back to work.

Applications & Use Cases

• Install the joystick and secondary steering unit, then route and secure wiring so it won’t chafe or get pinched under panels.
• Trace hydraulic and electrical paths so you can isolate steering issues if the wheel goes stiff or the joystick quits.
• Check sensor orientation, verify connectors, and test steering response after installation so auto-steer and manual modes both behave.
• Inspect mounting brackets and hardware, then align the joystick position so the operator’s not fighting it all day.
• Use the diagrams to bleed any affected steering circuits properly when you’ve opened lines during the kit install.

FAQ

Q: Is this a PDF I can keep on my laptop or tablet?

A: Yes, it’s typically a standard PDF, so you can search, zoom, and keep it on a shop computer or tablet.

Q: Can I print just the wiring and routing pages to take to the machine?

A: You usually can; most folks print the key diagrams so they don’t risk a tablet in the mud or on a greasy fender.

Safety Note

Always de-energize the machine, secure it from movement, and verify hydraulic pressure is bled off before working on the steering system.

CNH JOYSTICK STEERING WITH SECONDARY ELECTRICAL STEERING KIT Index:

1 SAFETY INFORMATION
Basic instructions – Important notice regarding equipment servicing. . . . . . . . . . . . . . . . . . . . . . . 1-1
Advice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Safety rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
2 KIT CONTENT
Kit overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
3 GENERAL INFORMATION
Basic instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
4 PRE-ASSEMBLY
PREPARING FOR ASSEMBLY
Preparation – Pre-assemble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
5 ASSEMBLY
Install
Joystick steering. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
6 POST-ASSEMBLY
INSTRUCTIONS
Machine configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1

CNH

92053000 – JOYSTICK STEERING WITH SECONDARY ELECTRICAL
STEERING KIT
CASE CONSTRUCTION
1021G X-DRIVE Stage V – STD linkage –
2025 Updates – CVT
1121G X-DRIVE Stage V – STD linkage –
2025 Updates – CVT
1021G+ X-DRIVE Stage V STD – Cab
Upgrade – CVT
1021G+ X-DRIVE Stage V STD – Cab
Upgrade – CVT
1021G+ X-DRIVE Stage V STD – Cab
Upgrade – CVT
1021G+ X-DRIVE Stage V STD – Cab
Upgrade – CVT
1121G+ X-DRIVE Stage V STD – Cab
Upgrade – CVT
1121G+ X-DRIVE Stage V STD – Cab
Upgrade – CVT
1121G+ X-DRIVE Stage V STD – Cab
Upgrade – CVT
1121G+ X-DRIVE Stage V STD – Cab
Upgrade – CVT
Lec