A multi-axle all terrain crane like the LTM 1160-5.1 drives to the job on public roads, then sets up with a telescopic boom to lift on site. If you're taking one into the workshop with no paperwork, this set puts every document for that one model in a single download. That's usually the first thing a service team asks for.
What this manual set helps you do
- Operate the crane chassis and superstructure correctly, and run the daily checks, with the operator manual (Operating Instructions).
- Order the right parts from the exploded views in the parts manual (Spare Parts Catalog), including the steering mechanism, compressed air plant and cooler installation.
- Repair and adjust the rear-axle steering with the service manual (Active Rear-Axle Steering Training), which covers hydraulic and electric circuit diagrams and the steering pumps.
- Trace faults through the schematics, 10 files with 1,050 pages of drawings.
- Verify engine work against the component manuals for the Liebherr D 846, D 856, D 934 + D 936 and D 946 engines.
Who this is for
A workshop or service company that has to repair a crane it has never seen before. You get the operating instructions, parts catalog, schematics and diagnostic documents together, so mechanics and the parts desk work from the same set.
FAQ
Q: What do I receive and how is it organised?
A: One download of 84 files, 78 of them PDF, with 8,698 PDF pages in total. The operator manual is 1,840 pages in 2 files in English. The parts manual is 1,306 pages in English and German. The service manual is 86 pages in English.
Q: Which machine does it fit?
A: The Liebherr LTM 1160-5.1 all terrain crane. Alongside the main manuals you also get load charts, technical data, service information, training documents, diagnostic documents and software, and CDs and software for the LTM 1160-5.1.
Q: How does it help with a used crane that arrived without paperwork?
A: You can look up the controls and inspections in the operator manual, find part numbers in the parts catalog, and follow the circuit diagrams when you trace a problem. Everything for the job is in one place.
Load the set once, and your mechanics, operators and parts desk can start work on the crane the same day.
📘 Show Index
Table of Contents:
Operator Manual Table of Contents
1,840 pages, 2 files
- Publication BAL-No. 20900-01-02 (1,641 pages)
- Description of crane
- Terminology
- Product description
- Technical data
- Crane chassis operation
- Operating and control instruments on the crane chassis
- Before starting to travel
- Axle suspension system
- Operation of crane superstructure
- Operating and control instruments on the crane superstructure
- LICCON computer system
- Crane start up and taking the crane out of service
- Equipment
- Safety technical notes for assembly and disassembly
- Folding jib – TK
- Winch 2
- Additional equipment
- Heater / engine preheating / Air conditioning system Drivers cab
- Heater / engine preheating / Air conditioning system Crane operators cab
- sliding beam monitoring
- Service and maintenance
- Maintenance and service – General
- Maintenance intervals – Crane chassis
- Maintanance intervals – Crane superstructure
- Inspections of cranes
- Periodic crane inspections
- Inspection of crane wire ropes
- Inspection of pneumatic brake system for disk brakes
- General notes
- Supplementary service work
- Appendix
- Foreword to appendix
- Update confirmation
- Publication 220911-01-02 (199 pages)
Parts Manual Table of Contents
1,306 pages, 1 file
- COOLER INSTALLATION
- RADIATOR, PRE-ASSEMBLED
- HYDR. COOLER DRIVE
- DIESEL ENGINE INSTALLATION
- DIESEL ENGINE, PRE-ASSEMBLED
- HYDRAULIK PUMP ASSEMBLY
- CLUTCH ASSEMBLY
- DISTRIBUTOR GEAR INSTALLATION
- TRANSFER CASE, PRE-ASSEMBLED
- HYDRAULICS
- ADD-ON UNIT TELMA
- DIESEL ENGINE PURCHASED PARTS
- AXLE 1 WITH SUSPENSION
- AXLE 1, PRE-ASSEMBLED
- INST. PARTS ANGLE SENSOR
- AXLE 2 WITH SUSPENSION
- AXLE 2, PRE-ASSEMBLED
- TYRES
- TIRE CPL
- AXLE 3 WITH SUSPENSION
- AXLE 3, PRE-ASSEMBLED
- AXLES 4+5 WITH SUSPENSION
- AXLE 4, PRE-ASSEMBLED
- AXLE 5, PRE-ASSEMBLED
- STEERING MECHANISM
- STEERING HYDRAULICS
- STEERING PIPEWORK
- DRIVE SHAFT FITTING
- FIXING PARTS SLEWING RING
- SLIDING BEAM WITH BEARING
- SLIDING BEAM FRONT,PRE-ASSEMB
- SLIDING BEAM REAR, PRE-ASSEMBL
- HYDRAULICS SLIDING BEAM PRE-AS
- HOSE LINES SLIDING BEAM
- WHEEL CHOCKS WITH HOLDER
- SUPPORT PLATES W.FAST.ADD-ON
- SUPPORT PLATE COMPL
- SPRING PLUG PRE-ASS
- FITTING BOOM SUPPORTING FRAME
- BOOM JIB SUPPORT BLOCK PRE-ASS
- UREA PLANT
- UREA TANK, PRE-MOUNTING
- HOSE LINES
- TOOL BOX CPL
- MARKER CARRIER
- FUEL FEED
- PREMOUNTED FUEL FILTER
- FUEL TANK CPL
- FUEL TANK, PRE-ASSEMBLED
- OIL RESERVOIR, EXTENSION
- OIL TANK PRE-ASS
- AIR VESSEL MOUNTING
- EXHAUST GAS SYSTEM
- EXHAUST SYSTEM PRE-ASSEMBLED
- AIR FILTER ASSY. W. AIR FLAP
- CONTROL SYSTEM
- MANEUVERING COUPLING
- TOOLS AND ACCESSORIES
- MAIN TOOLS
- ACCESSORIES
- VOLTAGE TRANSFORMER
- EL.EQUIPMENT TELMA
- BACKING WARNING ACOUSTIC
- ADDNL.PARTS F.TIRE COVER PANEL
- ADD-ON PARTS
- DISPATCH ASSY.MECH.PARTS
- HOSE GUIDE PRE-ASS
- ADD ON SPLASH GUARD
- PLATE
- PERSONAL PROTECTION EQUIPMENT
- DRIVER'S CABIN CPL
- COVERING HEATING OPENING
- SEATS DRIVER'S CAB
- MIRROR ATTACHMENT
- ROOF CONSOLE DRIVERS CABIN
- OPERATOR CAB ACCESSORIES
- DRIVER'S CABIN, GLAZED
- REWORK STEERING COLUMN
- DOOR HINGE CPL
- STEERING COLUMN SHEATHING
- ROOF CONSOLE COMPL
- ROOF CONSOLE PRE-ASS
- ANTI-SWAY GEAR
- AIR GUIDE SYSTEM
- STEERING COLUMN PRE-ASS
- STEERING WHEEL PRE-ASS
- INSTRUMENT BOX CPL
- SCREEN WHIPING SYSTEM COMPL
- VALVE PLATE, PRE-ASSEMBLED
- SCREEN WHIPING SYS. PRE-ASS
- COVER PRE-ASS
- BATTERY COVER PRE-ASS
- BACK AND SIDE WALL COVER, CPL
- BASE MATS
- LEATHER CLADDING
- COVER. PROFILES COMPL
- DOOR LEFT, CPL
- WINDOW, CRANK, LEFT
- DOOR RIGHT, CPL
- WINDOW, CRANK, RIGHT
- DRIVER'S CABIN CONTROLS
- CENTRE BRACKET PRE-ASS
- DASHBOARD CENTER CONSOLE PRE-A
- TERMINAL BOARD PRE-ASS
- WIRES COMPL. INSTRUMENTS
- INSERTION MODULE
- INSTALLATION RADIO SET
- FAN ATTACHMENT
- FUSE CARRIER
- AIR CONDITIONING UNDERCARRIAGE
- ELECTRIC FOR DRIVER'S CABIN
- WIRING LOOM DRIVER'S CABIN
- ELECTRICAL SYSTEM BATTERY
- TIRE COVER PANELLING
- STORAGE BOX
- DOOR
- PROTECTION PLATE PRE-ASSEMBLED
- ENGINE COVERING
- ADDITIONAL F.TIRE COVER PANELL
- LABELLING GREAT BRITAIN
- DRIVER'S CABIN PRE-ASS
- PLATING
- CONSPICUOUS MARKING
- UNDERCARRIAGE ELEC. SYSTEM
- CABLE LIST ELECTRICAL SYSTEM
- TEMPERATURE SENSOR
- DOUBLE HORN PRE-ASS
- WIRING HARNESS
- EMERGENCY STOP CABIN
- COLLECTING RING
- SLIP RING CONNECTOR PRE-ASSEM
- LIGHTING GREAT BRITAN
- LAMP CLAMP CPL.REAR LEFT
- LAMP CLAMP CPL.REAR RIGHT
- BUMPER COMPL. W. COVERING
- EL.COMP. DISPATCH ASSEMBLY
- LIGHTING SUPPORT SYSTEM
- COMPRESSED AIR PLANT
- PIPEWORK AIR INSTALLATION
- DAMPING PRESSURE SWITCH
- PNEUMAMATIC DRIVER'S CABIN
- HYDRAULIC SUPPORT
- PIPEWORK LOWERING BRAKE VALVE
- HOSE LINES UNDERCARRIAGE
- PIPELINES UNDERCARRIAGE
- ASSEMBLY PARTS F.SLEWING PLTF
- INTERLOCKING
- DRIVE ASSEMBLY CPL
- EXPANSION TANK PRE-ASS
- DRIVE ASSEMBLY, PRE-ASSEMBLED
- PILLOW BLOCK PRE-ASS
- PUMP HOISTING GEAR 2
- BATTERY STORAGE
- BATTERY BOX, PRE-ASSEMBLED
- COVER/LID/CAP, PRE-ASSEMBLED
- FUEL TANK ADD-ON UNIT
- OIL RESERVOIR, COMPLETE
- LUFFING RAM W. PIVOT
- ROLLER BEARING SLEWING RING
- SLEWING GEAR
- ANGLE THREADED BULKHEAD
- AUXILIARY HOISTING GEAR 2
- AUXILIARY HOISTING GEAR 2 PR.A
- CENTRALIZED LUBRICATION SYSTEM
- AUXILIARY HOIST.ROPE W.ACCESSO
- MAIN HOIST GEAR
- ROPE WITH ACCESSORIES 1
- CRANE DRIVER'S CABIN CPL
- CRANE DRIVER'S CABIN,PRE-ASSY
- LID
- CABIN MOUNTING – PLATFORM
- CONTROL STAND
- ARM REST LEFT
- ARM REST RIGHT
- TURNTABLE PANELLING
- SLEWING PLATFORM PANELLING LEF
- SLEWING PLATFORM PANELLING RIG
- COOLER COVER CPL
- FLAP RIGHT PRE-ASS
- SOUND PROOFING
- PREMOUNTED LEFT-HAND FLAP
- SHUTTER PRE-ASS
- FALL PROTECTION
- CABIN, GLAZED
- FRONT WINDOW CPL
- INSIDE ROOF LINING CPL
- INSTRUMENT BOX DELIVERY SCOPE
- LOUDSPEAKER CPL
- ATTACHMENT GRIP
- SPRAY NOZZLE
- DOOR CPL
- DOOR STOPPER COMPL
- EL.INSTRUMENTS F.CRANE DRIV.CA
- CABLE LIST DRIVER'S CABIN
- ELECTRIC ADD-ON PARTS CABIN
- PREMOUNT.AXIAL FLOW FAN UPPER
- SOCKET
- INSTRUMENT CLUSTER ELECTRICS
- HEATING, CRANE CABIN
- COUNTERWEIGHT WITH CLAMP
- COUNTERWEIGHT CPL
- COUNTERWEIGHT PRE-ASS
- SAFETY BOLT
- ADDITIONAL BALLAST
- BALLASTING
- CENTRAL LUBRICATING SYSTEM
- AUXILIARY REEVING CABLE, COMPL
- ADAPTER DATA LOGGER
- MIRROR ATTACHM.AT SLEW.PLATFOR
- MIRROR ATTACHM.IN CRANE CABIN
- MIRROR RETAINER PRE-ASS
- TACHOGRAPH
- AIR COND. UNIT SUPERSTRUCTURE
- HATCHING PLAN
- ELECTR. SYSTEM F.SLEWING PLATF
- ELECTRIC FOR BATTERY BOX
- ELECTR. FOR WORK AREA LIGHT
- EL.ADD-ON SET-LIMIT SWITCHES
- LIMIT SWITCH
- LIMIT SWITCH ADD-ON
- SWITCHBOX MOUNTING PARTS
- BASE ASSEMBLY CPL
- BASE ASSEMBLY
- CABLES, BASIC CONSTRUCTION CPL
- GROUND RAIL
- TERMINAL STRIP
- PRE-ASSEMBLY MOUNTING UNIT
- SCREENING
- CARRIER PLATE, PRE-ASSEMBLED
- COMPRESSED-AIR SYST.SUPERSTR
- PNEUM. CRANE OPERATORS CABIN
- HYDRAULICS UPPER CARRIAGE
- HOSE LINES ADDITIONAL PARTS
- HYDR.AUXILIARY HOISTING
- HOSE LINES HOISTING GEAR
- OIL COOLER CPL
- HOSE LINES SUPERSTRUCTURE
- PIPELINES SUPERSTRUCTURE
- TELESCOPIC UNIT CPL
- PIVOT SECTION, PRE-ASSEMBLED
- TELESCOPIC SECTION 1 PRE-ASSEM
- TELESCOPIC SECT.2 PRE-ASSEMBL
- TELESCOPIC SECT.3 PRE-ASSEMB
- TELESCOPIC SECT.IV PRE-ASSEMBL
- ROPE PULLEY CPL
- HOIST LIM.SWITCH PLUMMET CPL
- TELESCOPIC SECT.5 PRE-ASSEMBLE
- 2nd NECK PULLEY INSTALLATION
- MECHANICAL EXTENSION SYSTEM
- ADD-ON PARTS CYLINDER
- DOUBLE FOLDING JIB MECH.COMP
- CONSOLE PRE-ASS
- DOUBLE FOLDING JIB MECH. ASS
- MOUNTING PRE-ASS
- TRANSPORT MOUNTING
- FOLDING BRACKET PRE-ASS
- WHIP LINE 2-FALL
- BOOM NOSE PRE-ASS
- MECH. DOUBLE FOLD JIB PREMOUNT
- ADAPTER PRE-ASS
- REDUCER PRE-ASS
- HEAD SECTION PRE-ASS
- GUIDE PULLEY COMPL
- TENSION PLATE PRE-ASS
- ADD-ON UNIT LADDER
- HOLDER PRE-ASSEMBLY
- TOOLS
- MOUNTING HOOK ROD
- EL.2 HOISTING LIMIT SWITCH
- A-HEADL.SEARCHLIGHT PIVOT SEC
- WIND WARNING PREASSEMBLED
- FIXING DEVICE 2.LIFT TOP
- CARRIER, MEAS. & WARN. DEVICE
- MECH.AUXILIARIES FOR LIGHTING
- LOCATION FIXTURE
- SET OF NAME PLATES
- ELECTR. SYSTEM F. BOOM
- ELECTRIC F.BASE SECTION
- CABLE DRUM COMPL
- TERMINAL BOX
- ELECTR. FOR HEAD SECTION
- TERMINAL BOX CPL
- SENSOR ASSEMBLY
- HYDR.F.TELESCOPIC BOOM
- ADDNL.HYDR. FOLDING JIB
- HOOK BLOCK
- ROPE PULLEY
- OIL DRAIN PLUG
- EDDY CURRENT BRAKE
- SPRING LOADED MULTI-DISC BRAKE
- HANDBRAKE VALVE
- AIR DRYER
- DIRECTIONAL CONTROL VALVE
- BRAKE VALVE
- HYDRO MOTOR
- AERATION FILTER
- PRESSURE FILTER
- FILTER
- CONTROL BLOCK
- SOLENOID VALVE
- PRESSURE LIMITING VALVE
- LOAD HOLDING VALVE
- VALVE BLOCK
- VARIABLE PUMP
- HYDRO CYLINDER
- STEERING CENTERING CYLINDER
- RADIAL PISTON PUMP
- ANGULAR GEAR
- AXLE STRUT
- AIR COND. EVAPORATOR RFK
- AIR COMPRESSOR
- TRACK ROD
- DRIVING GEAR
- CONTROL VALVE
- GV CIRCUIT
- PLANETARY GEAR IT
- SYNCHROMESH
- COUPLING
- SYNCHRONIZATION COMPL
- PUMP
- CONTROL
- STORAGE
- GEARBOX HOUSING
- DRIVE SHAFT
- CLUTCH ACTUATOR
- CONNECTING PLATE
- WIPER MOTOR
- WATER BASIN
- BATTERY MAIN SWITCH
- TAIL BRAKE LIGHT
- TAIL LAMP
- POCKET LOCK
- HAND PUMP
- INTERMEDIATE GEAR CPL
- ROCKER ARM BRACKET PRE-ASS
- ROCKER ARM PRE-ASS
- CRANKSHAFT SEALING
- LUBE OIL FILTER ASSEMBLY
- THERMOSTAT HOUSING ASSEMBLY
- SET MAIN BEARINGS
- MAIN ROD
- FLYWHEEL ASSEMBLY
- VALVE
- LOCKING PIECES
- HEATING FLANGE ADD-ON
- CRANKSHAFT WITH GEAR
- POWER TAKE-OFF ADD-ON
- AUXILIARY DRIVE PRE-ASS
- TRANSPORT DEVICE ATTACHEMENT
- GENERATOR ADD-ON
- OIL DIPSTICK WITH PIPE
- CONTROL PARTS
- AIR COMPRESSOR PRE-ASS
- AT-WATER PUMP WITH FASTENING
- CRANKSHAFT ADD-ON PARTS
- VENTILATION CONNECTING PIECE
- COMPACT ROPE WINCH
- SUPPORT CYLINDER
- GEARBOX
- GB-CASE
- IT AS-TRONIK
- HOUSING
- RK TEMPERATURE SENSOR
- REP.TRANSMISSION ACTUATOR
- RK BRAKE
- HEAT EXCHANGER
- POWER TAKE-OFF
- SLEWING GEAR DRIVE
- ROPE DRUM
- PLANETARY GEARBOX
- OIL-GAUGING INSTRUMENT
- DIESEL ENGINE
- CRANKCASE
- NOZZLE
- STEERING BOX
- PISTON CPL
- CRANKSHAFT
- FLYWHEEL
- CYLINDER HEAD
- CYLINDER HEAD GASKET
- CYLINDER FAIRING
- COUNTER BRACKET
- CAMS SHAFT
- OIL MODULE
- LUBRICATING OIL PUMP
- SUCTION LINE JOINING
- SENSOR
- OIL SUMP
- WATER PUMP
- THERMOSTAT
- COOLANT PREHEATING
- HOSE UNION
- OUTLET MANIFOLD
- EXHAUST GAS TURBOCHARGER
- OIL LINE
- HYDT.TUBE
- INTAKE NOZZLE
- PRESSURE LINE
- PRESSURE PIPE
- PRESSURE ADAPTER ASS
- INJECTION LINES
- INJECTOR ASSY
- HIGH PRESSURE PUMP
- INTERMEDIATE WHEEL
- THREE PHASE CURRENT GENERATOR
- BELT TIGHTENER
- STARTER
- STARTER INSTALLATION
- REFRIGERANT COMPRESSOR
- ROCKER ARMS DEVICE CPL
- CRANKCASE BREATHER
- VALVE BRIDGE
- SCREW PLUG
- COOLANT PIPE BEND
- FLAME STARTING SYSTEM
- AIR ELBOW
- SENSOR ELEMENT
- FLANGE
- INTERMEDIATE GEAR ASSEMBLY
- LIQUID COOLING PIPELINE
- FAN DRIVE
- MOTOR SUPPORT
- FITTINGS
- FASTENING
- LIQUID COOLING PIPELINES
- RS AIR COMPRESSOR
- CABLE HARNESS MOUNTING
- ENGINE CONTROL SENSORS
- HYDRAULIC PUMP
- FUSE BOX SMALL
- WATER HEATING SYSTEM
- STEERING CYLINDER
- CLAMPING HUB
- OIL AIR COOLER
- AIR FILTER
- SUSPENSION CYLINDER
- COOLING WATER AIR BLEEDING
- FLYWHEEL HOUSING MOUNTING
- AIR CONDITIONING COMPRESSOR
- RS CRANKSHAFT BEARING KPL
- GENERATOR, PRE-ASSEMBLED
- OIL FILLER INLET
- BALANCER ASSEMBLY
- CONNECTING PIECE W.O-RING
- AIR INTAKE PIPE ASS
- CRANKCASE BREATHER ASSEMBLY
- OIL LINE PRE-ASSEMBLY
- CYLINDER HEAD COVER ASSEMBLY
- OIL SUMP PRE-ASS
- OIL SUMP WITH FASTENING
- INSTALLATION BRAKE COMPRESSOR
- CRANKCASE CPL
- CONTROL BOX ANNEXE
- OIL COOLER, PRE-ASSEMBLED
- OIL COOLER ADD-ON
- PISTON COOLING
- CYLINDER HEAD ASSEMBLY
- CRANKSHAFT PRE-ASS
- CONNECTING ROD PRE-ASS
- PIPELINE INSTALLATION
- POWER UNIT SUPPORT ATTACHMENT
- ACCESSORIES AIR COMPRESSOR
- FUEL LINES
- PISTON WITH PISTON'S RINGS
- CYLINDER, PRE-ASSEMBLED
- CYLINDER
- ROCKER ARM BRACKET CPL
- SUCTION NOZZLE ADD-ON
- HEAT PROTECTION W.FASTENING
- EXHAUST PIPE ASSEMBLY
- CONSOLE FOR FILTER PRE-ASS
- LEAK OIL RETURN LINE
- LUBE OIL PUMP WITH FASTENING
- AIR INTAKE ASSEMBLY
- BEARING FLANGE PRE-ASS
- CONSTR.KIT COMPR.AIR CONDIT
- CONNECTING LINE ADD-ON
- EXHAUST TC MOUNTING
- FUEL FINE-FILTER ASSEMBLY
- COOLANT PIPE BEND ADD-ON
- PRESSURE ADAPTER
- FUEL LINE ASSEMBLY
- HEATER CONNECTION
- INJECTOR FASTENING
- PRESSURE ADAPTER FASTENING
- LEVEL SENSOR
- CAMSHAFT CPL
- FINAL CONTROL VALVE
- FASTENING HIGH PRESSURE PUMP
- DRIVE FOR HIGH PRESSURE PUMP
- DISTRIBUTOR GEARBOX
- LOWERING BRAKE VALVE
- BALLAST EXTENSION RAM
- VARIABLE DISPLACEMENT MOTOR
- PUMP SUPPORT
- CO-DRIVER'S SEAT
- OPERATOR SEAT
- REGULATOR
- REGULATOR ELEMENT
- BRAKE
- FUEL PREFILTER
- ELECTRIC PUMP
- TWO-STAGE PUMP
- PRESSURE CONTROL VALVE
- SLIDE VALVE BLOCK
- CABLE REEL
- SLIP RING TRANSMITTER
- LUFFING CYLINDER
- GEAR WHEEL MOTOR
- ANTENNA
- TELESCOPIC CYLINDER
- SWITCHGEAR
- DRIVEN STEERING AXLE
- ROPE LENGTH INDICATOR
- STEERING AXLE
- DISTRIBUTION BLOCK
- RADIATOR UNIT
- FINAL DRIVE
- SCR MODULE
- UREA CONTAINER
- WIND VELOCITY TRANSMITTER
- AIR COND. COMPRESSOR ADD-ON
- AERATOR
- FUEL FILTER
- TRANSMISSION ACTUATOR
- BELT CARRIER SYSTEM
Service Manual Table of Contents
86 pages, 1 file
- Hydraulic
- Description for rear-axle steering
- Circuit diagram hydraulic
- Functional outline for circuit diagram hydraulic
- Function hydraulic rear-axle centering
- Function – centering ram (sectional view)
- Elektric
- Functional diagram
- Circuit diagramm electric: Outline LSB
- Circuit diagram electric: Control valves
- Circuit diagram electric: Control block (Bosch) RA steering
- Circuit diagram electric: Angle sensors – axle 1 and axles 3 to 5
- Component overview
- Pressure supply – steering pumps
- Fault monitoring
- Steering gear – flow meter, pressure limiting valve Measurement points
- Bosch-CAN-valves, axles 3 to 5
- Centering and auxiliary steering pump
- Valve block axle 3 to 5
- Flow controller
- Pressure switch, hydraulic accumulator
- Steering and centering cylinders, safety valves
- Angle sensors
- Description and fitting location
- Preparatory work
- Fitting of magnet
- Fitting of sensor
- Connection of sensor
- Assembly indications and dismantling
- Setting to zero of angle sensors
- Setting into operation and dismantling
- Functional test
- Troubleshooting instructions
- Circuit diagram of functional test
- Bosch control block
- Fitting and setting into operation
- Steering centering rams
- Assembly indications
- Track adjustment
- General
- Test and adjustment
- Indications
- Rear-axle steering pump
- Checking of stand-by-pressure
- Checking and adjusting of pressure cut-off and load signal pressure
- Centering pump
- Check and adjustment of pump pressure and stand-by pressure
- Diaphragme accumulator
- Test programs
Also in this set
- Schematics (10 files, 1,050 pages)
- Load charts (3 files, 1,006 pages)
- Technical data (4 files, 245 pages)
- Service information (4 files, 99 pages)
- Diagnostic documents and software (12 files, 2,227 pages)
- Training documents (1 file, 24 pages)
- Component manuals (9 files, 813 pages)
- Engine
- Liebherr D 846 Engine
- Liebherr D 856 Engine
- Liebherr D 934 + D 936 Engine
- Liebherr D 946 Engine
- CDs and software (36 files)
- Other documents (1 file, 2 pages)
Liebherr PDF Manuals
All Crane Manuals
