$ 0
0
$ 0
0

Mustang 170Z Compact Excavator Operator Manual (50940104A)

Format: PDF (Printable Document)

File Language: English

File Size: 11.88 MB (Speed Download Link)

Brand: Mustang

Model: 170Z

Machine Type: Compact Excavator

Publication No.: 50940104 (Rev. A)

Edition Date: June 2012

Type of Document: Operator Manual (operation, controls, safety and routine maintenance)

Searchable: Yes, text is searchable and copyable

Delivery: Instant download after payment

Categories: ,

$ 40

Share:

Mustang 170Z Compact Excavator Operator Manual (50940104A)

The 170Z is a compact excavator, the size of machine that digs trenches, footings and utility runs where a bigger excavator will not fit. This operator manual is the book for running it and looking after it, from the first walk-around to the service schedule.

It is publication 50940104 (Rev. A), edition date June 2012, in English, and it covers the Mustang 170Z. A separate manual exists for the 170Z NXT2 (50940308B, July 2018, serial numbers 00701 and up), so check which machine you have before you order.

What this manual helps you do

  • Start the engine by the book: section 13 covers checking before starting, starting up, and what to check once the engine is running.
  • Operate the machine with the monitor, switches, control levers and pedals explained in section 12, including the operator's seat and the fuse layout.
  • Check the Maintenance Table and the service intervals, including the separate intervals for work with the hydraulic breaker and the non-periodic services.
  • Look up the torque table in section 22-2 and the specifications and dimensional diagrams when you need a number.
  • Follow the safety sections on servicing, battery, towing and transportation, and read the warning label locations in section 10-1 so you know what each decal is telling you.

Who this is for

Fits the owner-operator or contractor who has a 170Z and needs the book at the machine. Also useful to a rental fleet or a buyer of a used unit who wants new operators to learn the controls and daily checks before the first dig.

Keep it in the cab and read the pre-start checks with any new operator before the first job.

Preview of the Mustang 170Z Compact Excavator Operator Manual (50940104A) (PDF, sample pages)

Does this manual fit your machine?

Mustang model 170Z
Machine type Compact Excavator
Publication No. 50940104 (Rev. A)
Edition date June 2012

Check the model and serial number on your machine’s serial plate before ordering.

What’s inside

  • Troubleshooting: Troubleshooting; 17-4. Troubleshooting
  • Torque values: 22-2. Torque table
  • Maintenance intervals / schedule: Maintenance Table; 24-2. Service intervals when using the hydraulic breaker; 25-2. Non-periodic services
  • Technical specifications: SPECIFICATIONS AND DIMENSIONAL DIAGRAMS

How this edition differs

Compared with Mustang 170Z NXT2 Compact Excavator Operator Manual:

This manual Other edition
Publication No. 50940104A 50940308B
Edition date June 2012 July 2018
Serial numbers – Serial Numbers 00701 and Up

FAQ

Where do I find the serial number plates?
Section 5 shows the location of the machine serial number plate, the engine serial number plate and the EPA emission control plates. It also covers ordering replacement parts and service calls.

What does it say about a new machine's first hours?
Section 3-2 covers the break in period, and 3-3 lists the conditions for complying with EPA emission standards.

Is there anything on working with a hydraulic breaker?
Yes, the maintenance section has its own heading, 24-2, for service intervals when using the hydraulic breaker.

How is the operation part laid out?
It starts with identification of important parts and the controls and switches, then goes through the monitor, switches, levers and pedals. Section 13 follows with checks, starting, traveling and steering.

More books for this machine

📘 Show Index

Table of Contents:

  • 1. Introduction
  • 2. Safety Information
  • 3. Product Overview
    • 3-1. Intended uses
    • 3-2. Break in period
    • 3-3. Conditions to insure compliance with EPA emission standards
  • 4. Operation License
    • 5-1. Location of machine serial number plate
    • 5-2. Location of engine serial number plate
    • 5-3. Location of EPA emission control plates
    • 5-4. Ordering replacement parts and service calls
  • SAFETY
  • 7. Basic Precautions
  • 8. Operating Precautions
    • 8-1. Precautions before starting the engine
    • 8-3. Precautions for transportation
    • 8-4. Precautions for the battery
    • 8-5. Precautions for towing
  • 9. Precautions for Servicing
    • 9-1. Precautions before servicing
    • 9-2. Precautions during servicing
  • 10. Safety Messages (Warning Labels)
    • 10-1. Location of warning labels
  • OPERATION
  • 11. Identification of Important Parts
    • 11-1. Overview of the machine
    • 11-2. Controls and switches
  • 12. Description of Control Devices
    • 12-1. Monitor
    • 12-2. Switches
    • 12-3. Control levers and pedals
    • 12-4. Engine hood
    • 12-6. Operator’s seat
    • 12-7. Fuse
  • 13. Operating Instructions
    • 13-1. Checking before starting the engine
    • 13-2. Starting up the engine
    • 13-3. Operating and checking instructions after starting the engine
    • 13-4. Traveling
    • 13-5. Steering
    • 13-6. Stopping the machine
    • 13-7. Swinging the upper structure
    • 13-8. Operating the implement
    • 13-9. Operating the track gauge change
    • 13-10. Precautions for operating the implement
    • 13-11. Precautions for working
    • 13-13. Escaping from the mud
    • 13-14. Operations using the bucket
    • 13-15. Replacing the bucket
    • 13-16. Reversing the bucket
    • 13-17. Parking the machine
    • 13-18. Inspection requirements after completing operation
    • 13-19. Stopping the engine
    • 13-20. Inspection requirements after stopping the engine
    • 13-21. Locking
    • 13-22. Handling the rubber crawlers
    • 13-23. Handling hydraulic P.T.O
  • 14. Transportation
    • 14-1. Loading and unloading the machine
    • 14-2. Precautions for loading the machine
    • 14-3. Precautions for transporting the machine
    • 14-4. Suspending the machine
  • 15. Care and Service in Cold Weather
    • 15-1. Preparing for cold weather
    • 15-2. Precautions after a day's work
    • 15-3. After cold weather ends
  • 16. Long-term Storage
    • 16-1. Before storing
    • 16-2. Storing
    • 16-3. Using the machine again
  • 17. Troubleshooting
    • 17-1. Phenomena that do not constitute faults
    • 17-2. Towing
    • 17-3. If the battery is overdischarged
    • 17-4. Troubleshooting
  • MAINTENANCE
  • 18. Precautions for Servicing
  • 19. Basic Servicing Practices
    • 19-1. Oils, fuel, and cooling water
    • 19-2. Electrical equipment
    • 19-3. Hydraulic system
  • 20. Consumables
    • 21-1. Fuel and oil
    • 21-2. Cooling water
    • 22-1. Required tools
    • 22-2. Torque table
  • 24. Maintenance Table
    • 24-1. Table of service time intervals
    • 24-2. Service intervals when using the hydraulic breaker
  • 25. Procedures for Maintenance
    • 25-1. First services
    • 25-2. Non-periodic services
    • 25-3. Checking before start-up
    • 25-4. Maintenance every 50 service hours
    • 25-5. Maintenance every 100 service hours
    • 25-6. Maintenance every 200 service hours
    • 25-7. Maintenance every 250 service hours
    • 25-8. Maintenance every 400 service hours
    • 25-9. Maintenance every 500 service hours
    • 25-10. Maintenance every 1000 service hours
    • 25-11. Maintenance every 2000 service hours
  • SPECIFICATIONS AND DIMENSIONAL DIAGRAMS
  • OPTIONAL PARTS AND ATTACHMENTS
  • 27. General Precautions
    • 27-1. Safety precautions
    • 27-2. Precautions for mounting an attachment (implement)
  • 28. Optional Parts and Attachments
    • 28-1. Optional parts and attachments
  • 29. Maintenance Log

Mustang PDF Manuals

Related Manuals

0
0
Your Cart
Your cart is emptyReturn to Shop