$ 0
0
$ 0
0

Mustang 450Z Compact Excavator Operator Manual

Format: PDF (Printable Document)

File Language: English

File Size: 7.18 MB (Speed Download Link)

Brand: Mustang

Model: 450Z

Machine Type: Compact Excavator

Publication No.: 50940100 (Rev. A)

Edition Date: June 2012

Type of Document: Operator Manual (operation, controls, safety and routine maintenance)

Searchable: Yes, text is searchable and copyable

Delivery: Instant download after payment

Categories: ,

$ 40

Share:

Mustang 450Z Compact Excavator Operator Manual

Most calls I get about a compact excavator come from a customer who cannot find a switch or does not know what a warning on the monitor means. That is what the Mustang 450Z Compact Excavator Operator Manual answers, with a contents list that runs from safety through controls, maintenance and specifications.

It is Publication No. 50940100 (Rev. A), edition date June 2012, written in English and covering the 450Z. If you also see the 450Z NXT2 manual, that one is publication 50940408B from July 2018 and applies to serial numbers 00701 and up, so check which machine you have before you buy.

What this manual helps you do

  • Start with the safety chapters: basic precautions, precautions before starting the engine, and the location of the warning labels on the machine.
  • Operate the machine from the section on control devices, which covers the monitor, switches, control levers and pedals, operator's seat and the cabin items such as the windshield and side door.
  • Check the Maintenance Table for service intervals, including the separate intervals for work with the hydraulic breaker and the nonperiodic services.
  • Look up the torque table and the specifications and dimensional diagrams when you need a figure.
  • Follow the troubleshooting section when something on the machine is not behaving, and read the break in period notes with any new unit.

Who this is for

Rental fleet managers and dealers handing a 450Z to a new operator will get the most from it, since the safety, controls and daily service sections are what a handover covers. Owner-operators and buyers of a used 450Z that came without a book can use it as the reference for intervals and serial plate locations.

Keep the 450Z manual where the next operator will see it before the first start.

Preview of the Mustang 450Z Compact Excavator Operator Manual (PDF, sample pages)

Does this manual fit your machine?

Mustang model 450Z
Machine type Compact Excavator
Publication No. 50940100 (Rev. A)
Edition date June 2012

Check the model and serial number on your machine’s serial plate before ordering.

What’s inside

  • Troubleshooting: Troubleshooting; 17-4. Troubleshooting
  • Torque values: 23-2. Torque table
  • Maintenance intervals / schedule: Maintenance Table; 24-2. Service intervals when using the hydraulic breaker; 25-2. Nonperiodic services
  • Technical specifications: SPECIFICATIONS AND DIMENSIONAL DIAGRAMS

How this edition differs

Compared with Mustang 450Z NXT2 Compact Excavator Operator Manual:

This manual Other edition
Publication No. 50940100A 50940408B
Edition date June 2012 July 2018
Serial numbers – Serial Numbers 00701 and Up

FAQ

Where do I find the serial number plates?
Section 5 gives the location of the machine serial number plate, the engine serial number plate and the EPA emission control plate. It also explains ordering replacement parts and service calls.

Which section covers service intervals?
Open the Maintenance Table. Section 24-2 gives intervals when using the hydraulic breaker, and 25-2 covers nonperiodic services.

Does it explain the monitor, switches and levers?
Yes. Section 12 describes the monitor, switch panel, control levers and pedals, plus the engine hoods, seat, headlight and the cabin items.

How is this different from the 450Z NXT2 manual?
This book is Rev. A from June 2012 for the 450Z. The NXT2 manual is a July 2018 edition for serial numbers 00701 and up.

More books for this machine

📘 Show Index

Table of Contents:

  • 1. Introduction
  • 2. Safety Information
  • 3. Product Overview
    • 3-1. Intended uses
    • 3-2. Break in period
    • 3-3. Conditions to insure compliance with EPA emission standards
  • 4. Operation License
    • 5-1. Location of machine serial number plate
    • 5-2. Location of engine serial number plate
    • 5-3. Location of EPA emission control plate
    • 5-4. Ordering replacement parts and service calls
  • SAFETY
  • 7. Basic Precautions
  • 8. Operating Precautions
    • 8-1. Precautions before starting the engine
    • 8-3. Precautions for transportation
    • 8-4. Precautions for the battery
    • 8-5. Precautions for towing
  • 9. Precautions for Servicing
    • 9-1. Precautions before servicing
    • 9-2. Precautions during servicing
  • 10. Safety Messages (Warning Labels)
    • 10-1. Location of warning labels
  • OPERATION
  • 11. Identification of Important Parts
    • 11-1. Overview of the machine
    • 11-2. Controls and switches
  • 12. Description of Control Devices
    • 12-1. Monitor
    • 12-2. Switch
    • 12-3. Control levers and pedals
    • 12-4. Engine hood B
    • 12-5. Engine hood rear cover
    • 12-7. Windshield (for cabin)
    • 12-8. Operator’s seat
    • 12-9. Ash tray (for cabin)
    • 12-10. Headlight
    • 12-11. Air outlet (for cabin)
    • 12-12. Right window glass (for cabin)
    • 12-13. Cabin side door
    • 12-14. Replenishment of windshield washer fluid
    • 12-15. Fuse
  • 13. Operating Instructions
    • 13-1. Checking before starting the engine
    • 13-2. Starting up the engine
    • 13-3. Operating and checking instructions after starting the engine
    • 13-4. Traveling
    • 13-5. Steering
    • 13-6. Stopping the machine
    • 13-7. Swinging the upperstructure
    • 13-8. Operating the implements
    • 13-9. Precautions for operating the implement
    • 13-10. Precautions for working
    • 13-12. Escaping from the mud
    • 13-13. Operations using the bucket
    • 13-14. Handling quick coupler
    • 13-15. Parking the machine
    • 13-16. Inspection requirements after completing operation
    • 13-17. Stopping the engine
    • 13-18. Inspection requirements after stopping the engine
    • 13-19. Locking
    • 13-20. Handling the rubber track (for rubber track type)
    • 13-21. Handling hydraulic P.T.O
  • 14. Transportation
    • 14-1. Loading and unloading the machine
    • 14-2. Precautions for loading the machine
    • 14-3. Precautions for transporting the machine
    • 14-4. Suspending the machine
  • 15. Care and Service in Cold Weather
    • 15-1. Preparing for cold weather
    • 15-2. Precautions after a day's work
    • 15-3. After cold weather ends
  • 16. Long-term Storage
    • 16-1. Before storing
    • 16-2. Storing
    • 16-3. Using the machine again
  • 17. Troubleshooting
    • 17-1. Phenomena that are not breakdowns
    • 17-2. Towing
    • 17-3. If the battery is overdischarged
    • 17-4. Troubleshooting
  • MAINTENANCE
  • 18. Precautions for Servicing
  • 19. Basic Servicing Practices
    • 19-1. Oils, fuel, and cooling water
    • 19-2. Electrical equipment
    • 19-3. Hydraulic system
  • 20. Consumables
    • 21-1. Fuel and oil
    • 21-2. Cooling water
    • 23-1. Required tools
    • 23-2. Torque table
  • 24. Maintenance Table
    • 24-1. Table of service time intervals
    • 24-2. Service intervals when using the hydraulic breaker
  • 25. Procedures for Maintenance
    • 25-1. First services
    • 25-2. Nonperiodic services
    • 25-3. Checking before start-up
    • 25-4. Maintenance every 50 service hours
    • 25-5. Maintenance every 100 service hours
    • 25-6. Maintenance every 250 service hours
    • 25-7. Maintenance every 500 service hours
    • 25-8. Maintenance every 1000 service hours
    • 25-9. Maintenance every 2000 service hours
  • SPECIFICATIONS AND DIMENSIONAL DIAGRAMS
  • OPTIONAL PARTS AND ATTACHMENTS
  • 27. General Precautions
    • 27-1. Safety precautions
    • 27-2. Precautions for mounting an attachment (implement)
  • 28. Optional Parts and Attachments
    • 28-1. Optional parts and attachments
    • 29-2. How to use air conditioner
    • 29-3. Maintenance, inspection and servicing of air conditioner
  • 30. Maintenance Log

Mustang PDF Manuals

Related Manuals

0
0
Your Cart
Your cart is emptyReturn to Shop