A new operator is about to climb into a 5002RD or 6002RD and nobody can say where the fuse panel is or what the console switches do. Or the machine came off a used lot with no book in the cab. The Mustang 5002RD and 6002RD Compact Excavator Operator Manual covers both machines in one English-language book.
It is publication number 000-69991. The contents run from international symbols and general information through safety to operation, with a maintenance schedule, lubrication, troubleshooting and the wiring and hydraulic schematics also listed in it.
What this manual helps you do
- Start the machine the right way with the Checklist Before Operation and the Starting/Stopping the Engine section, and learn the Mandatory Shutdown Procedure.
- Operate from the Machine Layout pages, which cover the outer cab, inner cab, console controls, travel controls and excavating controls.
- Check engine oil and the other lubrication points using the Lubrication section and the Maintenance Schedule.
- Adjust track tension by following the Adjusting Track Tension steps, and set the operator's seat with the seat adjustment controls pages.
- Look up the General Specifications, dimensions, engine and hydraulic system data, and the Wiring Schematic and Hydraulic Schematics when a problem needs tracing.
Who this is for
Best for contractors and rental fleets who hand a 5002RD or 6002RD to a new operator and want the controls, safety rules and daily checks on paper. Owner-operators of used machines will use it for service intervals and lubrication points.
Print the Checklist Before Operation pages and keep them in the cab for the next operator.
Preview of the Mustang 5002RD and 6002RD Compact Excavator Operator Manual (000-69991) (PDF, sample pages)
Does this manual fit your machine?
| Mustang models |
5002RD and 6002RD |
| Machine type |
Compact Excavator |
| Publication No. |
000-69991 |
Check the model and serial number on your machine’s serial plate before ordering.
What’s inside
- Wiring / electrical diagrams: Wiring Schematic
- Hydraulic diagrams / schematics: Hydraulic Schematics
- Troubleshooting: TROUBLESHOOTING
- Maintenance intervals / schedule: Maintenance Schedule
- Lubrication, oils, fluids and capacities: Lubrication; Lubrication Points; Checking Engine Oil
- Technical specifications: Specifications; General Specifications
- Adjustments and calibration: Adjusting Track Tension
FAQ
Where do I find what the controls do?
Open the OPERATION chapter. It has Travel Controls, Excavating Controls, Console Controls and the Machine Layout pages for the outer and inner cab.
Which section covers machine safety and decal locations?
SAFETY INFORMATION has General Safety Information, Safety Reminders, Fire Prevention and the Safety Decal and Sticker Locations.
Where are the service and lubrication details?
Look under the Maintenance Schedule, Lubrication, Lubrication Points and Checking Engine Oil headings. Adjusting Track Tension is also in the book.
Does it help with slopes and digging technique?
Yes. The Machine Operation part includes Earthmoving, Operating on Slopes and Moving The Excavator.
📘 Show Index
Table of Contents:
- INTERNATIONAL SYMBOLS
- GENERAL INFORMATION
- Introduction
- Machine Identification
- Specifications
- Engine
- Hydraulic System
- Undercarriage and Slewing System
- Dozer Blade
- Bucket (standard)
- Noise Level
- General Specifications
- Dimensions
- Checklists
- SAFETY INFORMATION
- General Safety Information
- Safety Symbols and Terminology
- Safety Reminders
- Fire Prevention
- Safety Decal and Sticker Locations
- Safety Decals and Stickers
- OPERATION
- Machine Layout
- Outer Cab Layout
- Inner Cab Layout
- Console Controls Layout
- Fuse Panel
- Travel Controls
- Excavating Controls
- Console Controls
- Operator’s Seat Adjustment Controls
- Ventilation
- Cab Latches
- Machine Operation
- Checklist Before Operation
- Starting/Stopping the Engine
- Moving The Excavator
- Mandatory Shutdown Procedure
- Earthmoving
- Operating on Slopes
- Operating in Water
- Excavator Boom Slewing
- Digging
- Grading
- Transporting
- Loading Machine for Transport
- Lifting the Machine
- MAINTENANCE
- Care and Servicing
- Maintenance Safety
- Maintenance Schedule
- Lubrication
- Lubrication Points
- Recommended Lubricants
- Engine
- Checking Engine Oil
- Changing Engine Oil & Filter
- Air Cleaner Service
- Fuel System
- Filling the Fuel Tank
- Fuel Filter
- Purging Air from Fuel System
- Cooling System
- Electrical System
- Fuses
- Battery
- Using a Booster Battery (Jump Starting)
- Wiring Schematic
- Hydraulic System
- Checking Hydraulic Oil Level
- Changing Hydraulic Oil
- Hydraulic Schematics
- Track System
- Adjusting Track Tension
- Changing Final Drive Oil
- TROUBLESHOOTING
- Indicator Lights
- Seals & Hoses
- Travelling Gear
- Bucket, Boom and Dozer Blade
Mustang PDF Manuals