Before anyone climbs into a 1750RT, 2100RT or 2500RT, the Mandatory Safety Shutdown Procedure is the first section to read, and it sits in the Safety chapter of this manual. These are Mustang compact track loaders, and this book covers running and looking after them, from Delivery Checklists and Machine Orientation through to Specifications.
This is publication 50940163, Rev. F, edition date May 2015. It covers the 1750RT Tier 4i (SN 30871-131000), the 1750RT NXT2 Tier 4 (SN 131001 and Up), the 2100RT Tier 4i (SN 40421-241000), the 2100RT NXT2 Tier 4 (SN 241001 and Up) and the 2500RT Tier 4. It is a good fit for a used machine that came without its book, or for a new hire taking over a track loader.
What this manual helps you do
- Start with the Before Starting and During Operation sections, then read Parking the Machine so the shutdown routine is the same every time.
- Check the Maintenance Schedule, Maintenance Interval and Maintenance Log pages to see what is due and to keep a record of it.
- Look up oil, coolant and hydraulic fluid in Fluids/Lubricants Types and Capacities and the Coolant Compound Table before you top anything off.
- Adjust the tracks and belts with the Straight Tracking Adjust and Checking and Adjusting V-belt Tension sections, and follow Track Replacement when a track is worn out.
- Read the Status, Maintenance and Error Code Screens, Error Codes and Controller Communication Error Codes when a warning comes up on the display.
Who this is for
Best for owner-operators and contractors who run these track loaders and need the daily routine, fluids and fault screens in one place. Rental fleet managers can also use it to brief customers before the machine leaves the yard.
Check your serial number against the ranges above before you buy, then keep the file on the shop laptop or phone.
Preview of the Mustang 1750RT, 2100RT and 2500RT (incl. NXT2) Compact Track Loader Operator Manual (50940163F) (PDF, sample pages)
Does this manual fit your machine?
| Mustang models |
1750RT, 2100RT and 2500RT (incl. NXT2) |
| Machine type |
Compact Track Loader |
| Publication No. |
50940163 (Rev. F) |
| Edition date |
May 2015 |
| Serial numbers |
1750RT Tier 4i SN 30871-131000; 1750RT NXT2 Tier 4 SN 131001 and Up; 2100RT Tier 4i SN 40421-241000; 2100RT NXT2 Tier 4 SN 241001 and Up; 2500RT Tier 4 |
Check the model and serial number on your machine’s serial plate before ordering.
What’s inside
- Wiring / electrical diagrams: Schematics
- Hydraulic diagrams / schematics: Hydraulic Schematic
- Fault / error codes: Status, Maintenance and Error Code Screens; Error Codes; Controller Communication Error Codes
- Troubleshooting: Troubleshooting; Engine Troubleshooting; Seal and Hose Troubleshooting
- Torque values: Torque Specifications
- Maintenance intervals / schedule: Maintenance Schedule; Maintenance Interval; Maintenance Log
- Lubrication, oils, fluids and capacities: Fluids/Lubricants Types and Capacities; Coolant Compound Table; Lubrication and Filter Changes
- Technical specifications: Specifications
- Removal, installation and overhaul procedures: Cab Door Removal; Track Replacement
- Adjustments and calibration: Straight Tracking Adjust; Checking and Adjusting V-belt Tension
How this edition differs
Compared with Mustang 1750RT NXT3, 2100RT NXT3 and 2500RT NXT3 Compact Track Loader Operator Manual:
|
This manual |
Other edition |
| Publication No. |
50940163F |
50940412H |
| Edition date |
May 2015 |
January 2020 |
| Serial numbers |
1750RT Tier 4i SN 30871-131000; 1750RT NXT2 Tier 4 SN 131001 and Up; 2100RT Tier 4i SN 40421-241000; 2100RT NXT2 Tier 4 SN 241001 and Up; 2500RT Tier 4 |
1750RT NXT3 Tier 4i SN 31051-131000, Tier 4 SN 131301 and Up; 2100RT NXT3 Tier 4i SN 40501-241000, Tier 4 SN 280051 and Up; 2500RT NXT3 Tier 4 SN 80301 and Up |
Compared with Mustang 1750RT and 2100RT Compact Track Loader Operator Manual:
|
This manual |
Other edition |
| Publication No. |
50940163F |
50940023E |
| Edition date |
May 2015 |
March 2013 |
| Serial numbers |
1750RT Tier 4i SN 30871-131000; 1750RT NXT2 Tier 4 SN 131001 and Up; 2100RT Tier 4i SN 40421-241000; 2100RT NXT2 Tier 4 SN 241001 and Up; 2500RT Tier 4 |
1750RT SN 30870 and Before; 2100RT SN 40420 and Before |
| Models covered only by |
2500RT |
– |
Compared with Mustang 1750RT, 2100RT and 2500RT (incl. NXT2) Compact Track Loader Operator Manual (50940361B):
|
This manual |
Other edition |
| Publication No. |
50940163F |
50940361B |
| Edition date |
May 2015 |
November 2015 |
| Serial numbers |
1750RT Tier 4i SN 30871-131000; 1750RT NXT2 Tier 4 SN 131001 and Up; 2100RT Tier 4i SN 40421-241000; 2100RT NXT2 Tier 4 SN 241001 and Up; 2500RT Tier 4 |
1750RT/NXT2 Tier 4i Engines SN 30981-131000, Tier 4 Engines SN 131201 and Up; 2100RT/NXT2 Tier 4i SN 40501-241000, Tier 4 SN 241101 and Up; 2500RT Tier 4 SN 80251 and Up |
FAQ
Where do I find the lifting and hauling instructions?
Open the Transporting the Machine chapter. It has Lifting the Machine with a Crane and Loading and Transporting the Machine.
Which section helps when an error code shows up?
Go to Error Codes and Controller Communication Error Codes, and read Status, Maintenance and Error Code Screens to see how the display shows them. Troubleshooting, Engine Troubleshooting and Seal and Hose Troubleshooting follow.
Does it cover the NXT2 machines and the 2500RT?
Yes. It covers the 1750RT and 2100RT Tier 4i and NXT2 Tier 4 serial ranges, plus the 2500RT Tier 4.
How is this different from the NXT3 operator manual?
The NXT3 book is publication 50940412H from January 2020 with its own NXT3 serial numbers. This one, 50940163F from May 2015, is for the NXT2 and earlier serial ranges listed above.
📘 Show Index
Table of Contents:
- Delivery Checklists
- Introduction
- Safety Symbol
- Contents and Use of this Manual
- Safety Symbol and Signal Words
- Safety Alert Symbol
- Signal Words
- Machine Orientation
- Proper Machine Use
- Service and Registration
- Machine Model and Serial Numbers
- Component Serial Numbers
- Component Identification
- Fields of Application
- Using Attachments
- Vibration Information
- Vibration Measurement and Actions
- Vibration Levels
- Fire Extinguisher
- Manufacturer Information
- Indicator and Operation Symbols
- Safety
- Safety Symbol and Signal Words
- Safety Alert Symbol
- Signal Words
- Mandatory Safety Shutdown Procedure
- Before Starting
- During Operation
- Applications with Load-Handling Devices
- Parking the Machine
- Electrical Energy
- Maintenance and Service Safety Practices
- Battery Hazards
- Fire Hazards
- Additional Safety Equipment
- Crystalline Silica Exposure
- Transporting the Machine
- Lifting the Machine with a Crane
- Loading and Transporting the Machine
- Safety Decals
- ANSI-Style Safety Decals
- ISO-Style Safety Decals
- Specifications
- Fluids/Lubricants Types and Capacities
- Dimensions
- Payloads/Capacities
- Weights
- Track Drive
- Coolant Compound Table
- Engine
- Hydraulic System
- General
- Drive Hydraulics
- Pumps
- Cylinders
- Forces and Cycle Times
- Electrical System
- Sound Power/Pressure Levels
- Vibration Levels
- Features
- Standard Features
- Optional Features
- Common Materials and Densities
- Controls
- Multi-Function Display
- Switches/Indicators
- Multi-Function Display Screens
- Screen Access
- Status, Maintenance and Error Code Screens
- Configuration Screens
- Audible Alerts
- Control Joysticks
- Joystick Tilt Function ISO/D-H Control Patterns
- Left Joystick Functions
- Right Joystick Functions
- Joystick Buttons/Switch Functions
- Joystick Control Sensitivity
- Straight Tracking Adjust
- Parking Brake/Work Hydraulics Lock-out
- Cab Heat and Air Conditioning (Option)
- Operator’s Seat
- Seat Forward and Back Horizontal Adjustment
- Seat Height Vertical Height/Weight Suspension Adjustment
- Air Suspension
- Mechanical Suspension
- Seat Belt
- Fastening/Unfastening the Seat Belt
- Armrest/Joystick Console Adjustment
- Throttle Controls
- Travel Controls
- Travel Speed Range Selection
- Travel Speed Limit (Option)
- Lift Arm Float Button
- Hydraglide™ Button (Option)
- Work Lights
- Battery Disconnect Switch (Option)
- Windshield Wipers/Washer
- Wiper/Washer Control
- Washer Fluid Reservoir
- Operation
- Operational Checks
- Pre-Start Checks
- Checks During Operation
- Parking Checks
- Before Operation
- Cab Entry and Exit
- Opening/Closing the Cab Door (Option)
- Cab Door Emergency Exit
- Cab Door Removal
- Seat and Armrest/Joystick Console Adjustment
- Seat Belt
- Parking Brake
- Starting the Engine
- Cold-Starting
- After Starting
- Warm Up
- Run-In Period
- Stopping the Engine
- Engine Stalling
- Diesel Particulate Filter (DPF) Regeneration Procedures
- Reset Regeneration
- Stationary Regeneration
- Forcing Stationary Regeneration
- Regeneration Inhibit
- Cancelling Regeneration Inhibit
- Recovery Regeneration
- DPF Service
- After Operation
- Jump-Starting
- Travel Drive Operation
- ISO Pattern Travel Drive Controls
- D-H Pattern Travel Drive Controls (Option)
- Straight Tracking Adjust
- Rubber Track Use Cautions and Tips
- Sprocket Tooth Wear and Track Life
- Travel Drive Error Condition Operation (Limp Mode)
- Alternate Transport Mode Activation
- Alternate Transport Mode Cancel
- Backup Alarm
- Lift Arm Operation
- Attachment Transport Position
- Joystick Control Patterns
- ISO Pattern Lift Arm Operation Controls
- D-H Pattern Lift Arm Operation Controls (Option)
- Self-Leveling
- Self-Leveling Cancel (Option)
- Lift Arm Float
- Hydraglide™ Ride Control System (Option)
- Hydraulics Control Lock
- Lift Arm Support
- Engage Lift Arm Support
- Disengage Lift Arm Support
- Connecting/Disconnecting Attachments
- Connecting Attachments
- Disconnecting Attachments
- Powering Attachments with Hydraulic Function
- Connecting Hydraulic Attachments to the Auxiliary Hydraulic Circuits
- Disconnecting Hydraulic Attachments from the Auxiliary Hydraulics Circuit
- Auxiliary Hydraulics Operation
- Standard-Flow Auxiliary Hydraulics Control
- High-Flow Auxiliary Hydraulics Control (Option)
- Optional 14-Pin Connector
- Working with Buckets
- Digging Tips
- Safety Instructions When Working with Buckets
- Working with Standard Buckets
- Scooping
- Loading
- Digging
- Backfilling
- Working with Pallet Forks
- Safety Instructions When Working with Pallet Forks
- Transporting Loads Using Pallet Forks
- Loading Pallet Forks
- Lifting Loads Using Pallet Forks
- Transporting Load Using Pallet Forks
- Setting Down Loads Using Pallet Forks
- Lifting the Machine using a Crane
- Crane Lifting Preparation
- Loading and Transporting the Machine on a Transport Vehicle
- Loading and Securing the Machine
- Storage Box
- Maintenance
- Maintenance Schedule
- Checks, Cleaning and Inspection
- Leakage Check
- Lubrication and Filter Changes
- Functional Check
- Maintenance Interval
- Engine Maintenance
- Engine Access
- Engine Oil
- Checking Engine Oil Level
- Changing Engine Oil and Filter
- Engine Air Filters
- Changing Air Filter Elements
- Engine Cooling System
- Checking Coolant Level
- Cleaning Radiator Fins
- Draining/Refilling Cooling System
- V-Belt Maintenance
- Checking and Adjusting V-belt Tension
- Air Conditioning V-Belt
- DPF Service
- Fuel System Maintenance
- Adding Fuel
- Water Separator Inspection/Maintenance
- Changing Fuel Filter
- Hydraulic System Maintenance
- Checking Hydraulic Oil Level
- Changing Hydraulic Oil and Filter
- Hydraulic Hose Maintenance
- Travel Motor Maintenance
- Track Maintenance
- General Lubrication
- Tilting ROPS/FOPS
- Raising ROPS/FOPS
- Lower ROPS/FOPS
- Electrical System
- Battery
- Using a Booster Battery (Jump-Starting)
- Fuses and Relays
- Engine Compartment Fuses/Relays (Model 2500RT)
- Engine Compartment Fuses/Relays
- Fuses Under ROPS/FOPS
- Control Modules
- Multi-function Control Module
- Lift Arm and Standard Auxiliary Flow Control Module
- Engine Control Module (ECU)
- Main/Drive Control Module
- Long-Term Storage
- Before Storage
- After Storage
- Air Conditioning Maintenance
- Air Conditioning Filters
- Cab Air Filter
- Outside Air Intake Filter
- Windshield Washer Reservoir
- Final Shutdown / Decommissioning
- Before Disposal
- Machine Disposal
- Maintenance Log
- Troubleshooting
- Engine Troubleshooting
- Indicator Lamp Troubleshooting
- Seal and Hose Troubleshooting
- Hydraulic System Troubleshooting
- Hydrostatic Travel Drive System Troubleshooting
- Electrical Troubleshooting
- Miscellaneous Troubleshooting
- Error Codes
- Controller Communication Error Codes
- Engine Error Codes
- Drive and Valve Error Codes
- Schematics
- Schematic Conventions
- Model 2500RT Schematics
- 2500RT Fuse/Relay Locations Index
- 2500RT Connector / Splice Locations Index
- Engine/Starting and Charging – Model 2500RT
- Engine Sensors – Models 2500RT
- Engine ECU – Models 2500RT
- Power Distribution/Fuses – Models 2500RT
- Power Distribution/Relays – Models 2500RT
- I/O Controller – Models 2500RT
- Solenoid Controller A – Models 2500RT
- Solenoid Controller B – Models 2500RT
- Operator/Drive Controls – Models 2500RT
- High-Flow/Self-Level/Power-A-Tach® Quick Attach System – Models 2500RT
- HVAC – Models 2500RT
- Track Tension/Work Lights – Models 2500RT
- Wipers/Washer Pump – Models 2500RT
- EU Road Lighting – Models 2500RT
- Auxiliary Power/Dome Light/Radio – Models 2500RT
- Operator CAN Interface – Models 2500RT
- Grounds – Models 2500RT (Later Machines)
- Grounds – Models 2500RT (Earlier Machines)
- Model 1750RT (Serial Numbers 131001 and Up) Model 2100RT (Serial Numbers 241001 and Up)
- 1750RT (Serial Numbers 131001 and Up), 2100RT (Serial Numbers 241001 and Up) Fuse/Relay Locations Index
- 1750RT (Serial Numbers 131001 and Up), 2100RT (Serial Numbers 241001 and Up) Connector / Splice Locations Index
- Engine/Starting and Charging – 1750RT (Serial Numbers 131001 and Up), 2100RT (Serial Numbers 241001 and Up)
- Power Distribution/Fuses – 1750RT (Serial Numbers 131001 and Up), 2100RT (Serial Numbers 241001 and Up)
- Power Distribution/Relays – 1750RT (Serial Numbers 131001 and Up), 2100RT (Serial Numbers 241001 and Up)
- Engine Sensors – 1750RT (Serial Numbers 131001 and Up), 2100RT (Serial Numbers 241001 and Up)
- Engine ECU – 1750RT (Serial Numbers 131001 and Up), 2100RT (Serial Numbers 241001 and Up)
- Engine ECU (Continued) – 1750RT (Serial Numbers 131001 and Up), 2100RT (Serial Numbers 241001 and Up)
- I/O Controller – 1750RT (Serial Numbers 131001 and Up), 2100RT (Serial Numbers 241001 and Up)
- Solenoid Controller A – 1750RT (Serial Numbers 131001 and Up), 2100RT (Serial Numbers 241001 and Up)
- Solenoid Controller B – 1750RT (Serial Numbers 131001 and Up), 2100RT (Serial Numbers 241001 and Up)
- Operator/Drive Controls – 1750RT (Serial Numbers 131001 and Up), 2100RT (Serial Numbers 241001 and Up)
- HVAC – 1750RT (Serial Numbers 131001 and Up), 2100RT (Serial Numbers 241001 and Up)
- Track Tension/Work Lights – 1750RT (Serial Numbers 131001 and Up), 2100RT (Serial Numbers 241001 and Up)
- Wipers/Washer Pumps – 1750RT (Serial Numbers 131001 and Up), 2100RT (Serial Numbers 241001 and Up)
- Auxiliary Power/Dome Light/Radio – 1750RT (Serial Numbers 131001 and Up), 2100RT (Serial Numbers 241001 and Up)
- Operator CAN Interface – 1750RT (Serial Numbers 131001 and Up), 2100RT (Serial Numbers 241001 and Up)
- Grounds – Model 1750RT (Serial Numbers 131001 and Up [Later Machines]), 2100RT (Serial Numbers 241001 and Up [Later Machines])
- Grounds – Model 1750RT (Serial Numbers 131001 and Up [Early Machines]), 2100RT (Serial Numbers 241001 and Up [Early Machines])
- Model 1750RT (Serial Numbers 131000 and Before) Model 2100RT (Serial Numbers 241000 and Before)
- 1750RT (Serial Numbers 131000 and Before), 2100RT (Serial Numbers 241000 and Before) Fuse/Relay Locations Index
- 1750RT (Serial Numbers 131000 and Before), 2100RT (Serial Numbers 241000 and Before) Connector / Splice Locations Index
- Engine/Starting and Charging – 1750RT (Serial Numbers 131000 and Before), 2100RT (Serial Numbers 241000 and Before)
- Engine Sensors – 1750RT (Serial Numbers 131000 and Before), 2100RT (Serial Numbers 241000 and Before)
- Engine ECU – 1750RT (Serial Numbers 131000 and Before), 2100RT (Serial Numbers 241000 and Before)
- Power Distribution – 1750RT (Serial Numbers 131000 and Before), 2100RT (Serial Numbers 241000 and Before)
- I/O Controller – 1750RT (Serial Numbers 131000 and Before), 2100RT (Serial Numbers 241000 and Before)
- Solenoid Control – A – 1750RT (Serial Numbers 131000 and Before), 2100RT (Serial Numbers 241000 and Before)
- Solenoid Control – B – 1750RT (Serial Numbers 131000 and Before), 2100RT (Serial Numbers 241000 and Before)
- Operator/Drive Controls – 1750RT (Serial Numbers 131000 and Before), 2100RT (Serial Numbers 241000 and Before)
- HVAC – 1750RT (Serial Numbers 131000 and Before), 2100RT (Serial Numbers 241000 and Before)
- Track Tension/Lighting Control – 1750RT (Serial Numbers 131000 and Before), 2100RT (Serial Numbers 241000 and Before)
- Wipers/Washer Pumps – 1750RT (Serial Numbers 131000 and Before), 2100RT (Serial Numbers 241000 and Before)
- Work Lights – 1750RT (Serial Numbers 131000 and Before), 2100RT (Serial Numbers 241000 and Before)
- Auxiliary Power/Dome Light/Radio – 1750RT (Serial Numbers 131000 and Before), 2100RT (Serial Numbers 241000 and Before)
- Operator CAN Interface – 1750RT (Serial Numbers 131000 and Before), 2100RT (Serial Numbers 241000 and Before)
- Grounds – 1750RT (Serial Numbers 131000 and Before [Later Machines]), 2100RT (Serial Numbers 241000 and Before [Later Machines])
- Hydraulic Schematic
- Index
- EC Declaration of Conformity
- Torque Specifications
Mustang PDF Manuals