$ 0
0
$ 0
0

Mustang 800Z Compact Excavator Operator Manual (50940212A)

Format: PDF (Printable Document)

File Language: English

File Size: 56.92 MB (Speed Download Link)

Brand: Mustang

Model: 800Z

Machine Type: Compact Excavator

Publication No.: 50940212 (Rev. A)

Edition Date: January 2014

Serial No.: Serial Numbers 00701 and Up

Type of Document: Operator Manual (operation, controls, safety and routine maintenance)

Searchable: Yes, text is searchable and copyable

Delivery: Instant download after payment

Categories: ,

$ 40

Share:

Mustang 800Z Compact Excavator Operator Manual (50940212A)

Publication 50940212 (Rev. A, January 2014) is the operator manual for the Mustang 800Z compact excavator, serial numbers 00701 and up. It is written in English and built around running the machine and looking after it day to day.

If you picked up a used 800Z without the book, or you are handing one to a new operator or a rental customer, this is the manual that goes with it. It opens with Introduction, Safety Information, Product Overview and Operation License, then moves into a Quick Guide and the main Safety, Operation and Maintenance sections.

What this manual helps you do

  • Start with the Safety section: Basic Precautions, Operating Precautions, Precautions for Servicing and the Safety Messages for the warning labels.
  • Operate the machine from the sections on Identification of Important Parts, Description of Control Devices and Operating Instructions.
  • Check the Maintenance Table before each job, and use Procedures for Maintenance and Consumables for the actual service work.
  • Look up the service intervals for hydraulic breaker work and the Nonperiodic services, plus the Torque table.
  • Follow the chapters on Transportation, Care and Service in Cold Weather and Long-term Storage when the machine is moving or going away for the winter.

Who this is for

Owner-operators and contractors running an 800Z, and rental fleets that hand the machine to a different operator every week. Good for the first walk-around with a new operator and for settling service questions later.

Check your serial number against 00701 and up before you order.

Preview of the Mustang 800Z Compact Excavator Operator Manual (50940212A) (PDF, sample pages)

Does this manual fit your machine?

Mustang model 800Z
Machine type Compact Excavator
Publication No. 50940212 (Rev. A)
Edition date January 2014
Serial numbers Serial Numbers 00701 and Up

Check the model and serial number on your machine’s serial plate before ordering.

What’s inside

  • Troubleshooting: Troubleshooting
  • Torque values: Torque table
  • Maintenance intervals / schedule: Maintenance Table; Service intervals when using the hydraulic breaker; Nonperiodic services
  • Technical specifications: SPECIFICATIONS AND DIMENSIONAL DIAGRAMS

How this edition differs

Compared with Mustang 800Z Compact Excavator Operator Manual (50940098A):

This manual Other edition
Publication No. 50940212A 50940098A
Edition date January 2014 June 2012

Compared with Mustang 800Z NXT2 Compact Excavator Operator Manual:

This manual Other edition
Publication No. 50940212A 50940324B
Edition date January 2014 July 2018
Serial numbers Serial Numbers 00701 and Up Serial Numbers 00901 and Up

FAQ

Where do I find the service intervals?
Open the Maintenance section and go to the Maintenance Table. Intervals for hydraulic breaker use and the Nonperiodic services are listed there as well.

Is there help when something goes wrong with the machine?
Yes, the Operation section has a Troubleshooting chapter. The book also has an Appendix Table at the back.

How does this edition differ from the other 800Z manuals?
This is 50940212A from January 2014, for serial numbers 00701 and up. 50940098A is an earlier edition from June 2012, and the 800Z NXT2 manual, 50940324B from July 2018, covers serial numbers 00901 and up.

Does it cover attachments and machine dimensions?
Yes, there is a section on Optional Parts and Attachments that starts with General Precautions. Specifications and Dimensional Diagrams have their own section.

More books for this machine

📘 Show Index

Table of Contents:

  • 1. Introduction
    • 2. Safety Information
    • 3. Product Overview
      • 3.1 Intended uses
      • 3.2 Break in period
      • 3.4 Emission system warranty
      • 3.5 Acquisition of Information on Machines in Operation and Handling of Acquired Information
    • 4. Operation License
      • 5.1 Location of machine serial number plate
      • 5.2 Location of engine serial number plate
      • 5.3 Location of EPA emission control plates
      • 5.4 Ordering replacement parts and service calls
    • QUICK GUIDE
    • SAFETY
    • 1. Basic Precautions
    • 2. Operating Precautions
      • 2.1 Precautions before starting the engine
      • 2.3 Precautions for transportation
      • 2.4 Precautions for the battery
      • 2.5 Precautions for towing
    • 3. Precautions for Servicing
      • 3.1 Precautions before servicing
      • 3.2 Precautions during servicing
    • 4. Safety Messages (Warning Labels)
      • 4.1 Location of warning labels
    • OPERATION
    • 1. Identification of Important Parts
      • 1.1 Overview of the machine
      • 1.2 Controls and switches
    • 2. Description of Control Devices
      • 2.1 LCD Monitor
      • 2.2 Switches
      • 2.3 Control levers and pedals
      • 2.4 Engine hood
      • 2.5 Bonnet B
      • 2.6 Bonnet R
      • 2.8 Tool storage space
      • 2.9 Windshield
      • 2.10 Hammer for emergency escape from operator’s cab
      • 2.11 Operator’s seat
      • 2.12 Headlight
      • 2.13 Ash tray
      • 2.14 Right window glass
      • 2.15 Cabin side door
      • 2.16 Handling Air Conditioner
      • 2.17 Replenishment of windshield washer fluid
      • 2.18 Fuse
      • 2.19 External power socket
    • 3. Operating Instructions
      • 3.1 Checking before starting the engine
      • 3.2 Starting up the engine
      • 3.3 Operating and checking instructions after starting the engine
      • 3.4 Traveling
      • 3.5 Steering
      • 3.6 Stopping the machine
      • 3.7 Swinging the upperstructure
      • 3.8 Operating the implement
      • 3.9 Precautions for operating the implement
      • 3.10 Precautions for working
      • 3.12 Escaping from the mud
      • 3.13 Operations using the bucket
      • 3.14 Parking the machine
      • 3.15 Inspection requirements after completing operation
      • 3.16 Stopping the engine
      • 3.17 Inspection requirements after stopping the engine
      • 3.18 Locking
      • 3.19 Handling the rubber crawlers
      • 3.20 Replacing the bucket without the quick coupler
      • 3.21 Reversing the bucket without the quick coupler
      • 3.22 Handling quick coupler
      • 3.23 Handling hydraulic P.T.O
      • 3.25 Handling SMARTASSIST-Remote
    • 4. Transportation
      • 4.1 Loading and unloading the machine
      • 4.2 Precautions for loading the machine
      • 4.3 Precautions for transporting the machine
      • 4.4 Suspending the machine
    • 5. Care and Service in Cold Weather
      • 5.1 Preparing for cold weather
      • 5.2 Precautions after a day's work
      • 5.3 After cold weather ends
    • 6. Long-term Storage
      • 6.1 Before storing
      • 6.2 Storing
      • 6.3 Using the machine again
    • 7. Troubleshooting
      • 7.1 Phenomena that do not constitute faults
      • 7.2 Towing
      • 7.3 If the battery is overdischarged
      • 7.4 Troubleshooting
    • MAINTENANCE
    • 1. Precautions for Servicing
    • 2. Basic Servicing Practices
      • 2.1 Oils, fuel, and cooling water
      • 2.2 Electrical equipment
      • 2.3 Hydraulic system
    • 3. Consumables
      • 4.1 Fuel and oil
      • 4.2 Cooling water
      • 5.1 Required tools
      • 5.2 Torque table
    • 7. Maintenance Table
      • 7.1 Table of service time intervals
      • 7.2 Service intervals when using the hydraulic breaker
    • 8. Procedures for Maintenance
      • 8.1 First services
      • 8.2 Nonperiodic services
      • 8.3 Checking before start-up
      • 8.4 Maintenance every 50 service hours
      • 8.5 Maintenance every 100 service hours
      • 8.6 Maintenance every 250 service hours
      • 8.7 Maintenance every 500 service hours
      • 8.8 Maintenance every 1000 service hours
      • 8.9 Maintenance every 1500 service hours
      • 8.10 Maintenance every 2000 service hours
      • 8.11 Maintenance every 3000 service hours
    • SPECIFICATIONS AND DIMENSIONAL DIAGRAMS
    • OPTIONAL PARTS AND ATTACHMENTS
    • 1. General Precautions
      • 1.1 Safety precautions
      • 1.2 Precautions for mounting an attachment (implement)
    • APPENDIX TABLE
      • 1. List of consumables
      • 2. Fuel, oil and cooling water
      • 3. Required tools
      • 4. Torque table
      • 5. List of essential parts

Mustang PDF Manuals

Related Manuals

0
0
Your Cart
Your cart is emptyReturn to Shop