$ 0
0
$ 0
0

Mustang 1350R, 1500R and 1650R Skid Steer Loader Operator Manual (50940264N)

Format: PDF (Printable Document)

File Language: English

File Size: 33.95 MB (Speed Download Link)

Brand: Mustang

Models: 1350R, 1500R and 1650R

Machine Type: Skid Steer Loader

Publication No.: 50940264 (Rev. N)

Edition Date: April 2022

Serial No.: 1350R SN 188601 and Before; 1500R SN 190801 and Before

Type of Document: Operator Manual (operation, controls, safety and routine maintenance)

Searchable: Yes, text is searchable and copyable

Delivery: Instant download after payment

Categories: ,

$ 40

Share:

Mustang 1350R, 1500R and 1650R Skid Steer Loader Operator Manual (50940264N)

Publication 50940264, Rev. N, April 2022, is the operator manual for the Mustang 1350R, 1500R and 1650R skid steer loaders. It covers the 1350R up to SN 188601 and the 1500R up to SN 190801, so it fits the earlier machines and not the NXT2 units built after those numbers.

I hand skid steers to new customers every week, and the first questions are always about the controls, the safety interlock and the daily checks. This book answers them in English, from the safety chapters through the Information Center display, attachment mounting and the auxiliary hydraulics, to the maintenance schedules and troubleshooting.

What this manual helps you do

  • Start the machine the right way by reading the Mandatory Safety Shutdown Procedure, the Operator's Position section and the Safety Interlock System (Hydraloc).
  • Operate the controls with the Control Keypad, the Information Center Electronic Display, Lift Arm Float and the optional Two-Speed Drive and Hydraglide Ride Control System.
  • Check engine oil level and follow the steps for changing engine oil and filter under General Lubrication.
  • Look up the Maintenance Schedules and keep your records in the Maintenance Log.
  • Read the Error Codes and Engine Diagnostic Trouble Codes (DTC) tables, then use the Engine Troubleshooting and Seal and Hose Troubleshooting sections to track down a fault.

Who this is for

Rental fleet managers and dealers who hand these machines over will use it to brief new operators on safety equipment, controls and daily checks. Owner-operators and contractors with an earlier 1350R, 1500R or 1650R will use it for service intervals, fluids and fault codes.

Keep it with the machine so every new operator reads the safety section first.

Preview of the Mustang 1350R, 1500R and 1650R Skid Steer Loader Operator Manual (50940264N) (PDF, sample pages)

Does this manual fit your machine?

Mustang models 1350R, 1500R and 1650R
Machine type Skid Steer Loader
Publication No. 50940264 (Rev. N)
Edition date April 2022
Serial numbers 1350R SN 188601 and Before; 1500R SN 190801 and Before

Check the model and serial number on your machine’s serial plate before ordering.

What’s inside

  • Fault / error codes: Error Codes; Engine Diagnostic Trouble Codes (DTC)
  • Troubleshooting: Troubleshooting; Engine Troubleshooting; Seal and Hose Troubleshooting
  • Maintenance intervals / schedule: Maintenance Schedules; Maintenance Log
  • Lubrication, oils, fluids and capacities: General Lubrication; Checking Engine Oil Level; Changing Engine Oil and Filter

How this edition differs

Compared with Mustang 1350R NXT2 and 1500R NXT2 Skid Steer Loader Operator Manual (50950504E):

This manual Other edition
Publication No. 50940264N 50950504E
Edition date April 2022 May 2021
Serial numbers 1350R SN 188601 and Before; 1500R SN 190801 and Before 1350R NXT2 SN 188602 and Up; 1500R NXT2 SN 190802 and Up
Models covered only by 1650R –

Compared with Mustang 1350R NXT2 and 1500R NXT2 Skid Steer Loader Operator Manual (50950504F):

This manual Other edition
Publication No. 50940264N 50950504F
Serial numbers 1350R SN 188601 and Before; 1500R SN 190801 and Before 1350R NXT2 SN 188602 and Up; 1500R NXT2 SN 190802 and Up
Models covered only by 1650R –

Compared with Mustang 1350R, 1500R and 1650R Skid Steer Loader Operator Manual (50940264M):

This manual Other edition
Publication No. 50940264N 50940264M
Edition date April 2022 May 2021

Compared with Mustang 1350R, 1500R, 1650R and 1900R NXT2 Skid Steer Loader Operator Manual:

This manual Other edition
Publication No. 50940264N 50950612EN-USA
Edition date April 2022 March 2024
Models covered only by – 1900R

FAQ

Which serial numbers does this book cover?
It covers the 1350R at SN 188601 and before, and the 1500R at SN 190801 and before. The 1650R is included in the same book.

How does this differ from the NXT2 operator manuals?
The NXT2 manuals (50950504E and 50950504F) cover the 1350R NXT2 from SN 188602 and up and the 1500R NXT2 from SN 190802 and up. This book, 50940264N, is for the machines below those numbers and also includes the 1650R.

Where do I find the safety shutdown and lift arm support information?
Both sit in the Safety chapter. It has the Mandatory Safety Shutdown Procedure, Lift Arm Support, Battery Disconnect Switch, ROPS/FOPS and the Rear Window Emergency Exit.

What do I open when a fault code appears?
Go to the Error Codes and Engine Diagnostic Trouble Codes (DTC) sections. The Troubleshooting chapters then cover engine, seal and hose problems.

More books for this machine

📘 Show Index

Table of Contents:

  • Introduction
    • Safety Symbol and Signal Words
      • Signal Words
    • Contents and Use of this Manual
    • Machine Orientation
    • Proper Machine Use
    • Service and Registration
      • Model and Serial Numbers
    • Fields of Application
      • Using Attachments
    • Vibration Information
    • Fire Extinguisher Location
    • Manufacturer Information
    • Indicator and Operation Symbols
  • Safety
    • Mandatory Safety Shutdown Procedure
    • Safety Reminders
      • Before Starting
      • Additional Safety Equipment
      • During Operation
      • Electrical Energy
      • Maintenance
      • Crystalline Silica Exposure
      • Transporting the Machine
      • Lifting the Machine with a Crane
      • Loading and Transporting the Machine
    • Safety Decals
      • New Decal Application
    • Product and Component Plate Locations
  • Safety Equipment
    • Guards and Shields
    • Operator’s Position
      • Operator’s Seat
      • Seat Belt
      • Upper Torso Restraint (Option)
      • Operator Restraint Bar
    • Safety Interlock System (Hydraloc™)
      • Safety Interlock System Test
    • Parking Brake
    • ROPS/FOPS
    • Rear Window Emergency Exit
    • Lift Arm Support
      • Engage Lift Arm Support
      • Disengage Lift Arm Support
    • Battery Disconnect Switch
  • Indicators and Controls
    • Control Keypad
      • Control Keypad Indicators
      • Control Keypad Buttons
    • Accessory Keypad Indicators/Buttons
    • Optional Lights/Lockout Keypad Indicators/Buttons
    • Information Center Electronic Display
      • Information Center Electronic Display Symbols
      • Information Center Electronic Display Screens
    • Controls
      • Ignition Keyswitch
      • Throttle Controls
      • Travel Drive, Lift and Tilt Controls
    • Two-Speed Drive (Option)
    • Lift Arm Float
    • Hydraglide™ Ride Control System (Option)
    • Beacon/Position/Work Lights
    • HVAC (Option)
    • Dome Light
    • Accessory Plug
    • Battery Disconnect Switch
    • Attachment Mounting
      • All-Tach® Hitch
      • Power-A-Tach® System
      • Activating The Warming Circuit (1650R Models – SN 191901 and Up)
    • Auxiliary Hydraulic System
      • Auxiliary Hydraulic Couplers
      • Auxiliary Hydraulics Control
      • High-Flow Auxiliary Hydraulic Control (Optional for 1650R Models)
  • Operation
    • Before Starting the Engine
      • Operational Checks
      • Cab Entry and Exit
    • Starting the Engine
      • Cold-Starting
      • After Starting
      • Warm Up
    • Run-In Period
    • Stopping the Machine
    • Engine Stalling
    • Parking the Machine
    • Brake Release Operation (Option)
    • Jump-starting
    • Travel Drive Operation
      • Two-Speed Drive (Option)
      • Driving on an Incline
      • Driving over Rough Terrain
    • Transport on Public Roads
      • Transport Hydraulics Lock-out (Option)
    • Lift Arm Operation
      • Attachment Transport Position
      • Lift Arm Float
      • Hydraglide™ Ride Control System
    • Changing Attachments
      • Connecting Attachments
      • Disconnecting Attachments
      • Connecting Auxiliary Hydraulic Couplings
      • Disconnecting Auxiliary Hydraulic Couplings
    • Self-Leveling (Option)
      • Self-Leveling Cancel
    • Using Buckets
      • Digging with a Bucket
      • Loading a Bucket
      • Dumping a Load onto a Pile
      • Loading Trucks (or Hoppers)
      • Backfilling Holes and Embankments
      • Scraping with a Bucket
      • Grading
    • Using Pallet Forks
      • Safety Instructions When Working with Pallet Forks
      • Transporting Loads Using Pallet Forks
    • Loading and Transporting the Machine on a Transport Vehicle
    • Towing
    • Lifting the Machine Using a Crane or Hoist
    • Diesel Particulate Filter (DPF) Regeneration Procedures
      • Reset Regeneration
      • Stationary Regeneration
      • Forcing Stationary Regeneration
      • DPF Maintenance
    • Camera Observation System
    • Back-Up Alarm
  • Maintenance
    • Maintenance Schedules
    • Maintenance Log
    • General Lubrication
    • Removing Foreign Material
    • Tilting the ROPS/FOPS
      • Raising the ROPS/FOPS
      • Lowering the ROPS/FOPS
    • Lifting the Machine
      • Lowering the Machine
    • Engine Maintenance
      • Engine Access
      • Engine Mounting Hardware Inspection
      • Checking Engine Oil Level
      • Changing Engine Oil and Filter
    • Fuel System Maintenance
      • Adding Fuel
      • Water Separator Maintenance
      • Changing Water Separator Filter
      • Changing Fuel Filter
    • Engine Air Cleaner
      • Changing Air Filter Elements
    • DPF Service
    • V-Belt Maintenance
    • Cooling System
      • Checking Coolant Level
      • Cleaning Radiator Fins
      • Draining/Flushing Cooling System
    • Hydraulic System
      • Checking Hydraulic Oil Level
      • Changing Hydraulic Oil Filter
      • Changing Hydraulic Oil
      • Hydraulic Hose Maintenance
    • Chaincases
      • Drive Motors
      • Checking and Adding Chaincase Oil
      • Changing Chaincase Oil
      • Drive Chain Tension
    • Seat and Restraint Bar Switches
    • Bucket Cutting Edge
    • Wheel Nuts
    • Tires
      • Mounting Tires
      • Checking Tire Pressure
    • Electrical System
      • Fuses, Relays and Diodes
      • Battery
    • Windshield Washer Reservoir
    • Long-Term Storage
      • Before Storage
      • After Storage
    • Final Shutdown / Decommissioning
      • Before Disposal
      • Machine Disposal
    • Dealer Services
  • Troubleshooting
    • Engine Troubleshooting
    • Indicator Lamp Troubleshooting
    • Seal and Hose Troubleshooting
    • Hydraulic System Troubleshooting
    • Hydrostatic Drive System Troubleshooting
    • Electrical Troubleshooting
    • Error Codes
      • Engine Diagnostic Trouble Codes (DTC)
    • Fluid Capacities/Lubricants
    • Weights
    • Payloads/Capacities
    • Engine
    • Coolant Compound Mixtures
    • Hydraulics
    • Travel Speeds
    • Electrical System
    • Sound Levels
    • Vibration Levels
    • Dimensions
    • Features
    • Common Materials and Densities
  • Index

Mustang PDF Manuals

Related Manuals

0
0
Your Cart
Your cart is emptyReturn to Shop