$ 0
0
$ 0
0

Mustang 1350R NXT2 and 1500R NXT2 Skid Steer Loader Operator Manual (50950504E)

Format: PDF (Printable Document)

File Language: English

File Size: 35.60 MB (Speed Download Link)

Brand: Mustang

Models: 1350R NXT2 and 1500R NXT2

Machine Type: Skid Steer Loader

Publication No.: 50950504 (Rev. E)

Edition Date: May 2021

Serial No.: 1350R NXT2 SN 188602 and Up; 1500R NXT2 SN 190802 and Up

Type of Document: Operator Manual (operation, controls, safety and routine maintenance)

Searchable: Yes, text is searchable and copyable

Delivery: Instant download after payment

Categories: ,

$ 40

Share:

Mustang 1350R NXT2 and 1500R NXT2 Skid Steer Loader Operator Manual (50950504E)

Mustang 1350R NXT2 and 1500R NXT2 skid steer loaders hand over best when the customer has read the Mandatory Safety Shutdown Procedure first. That section sits in the Safety chapter of this operator manual, ahead of the safety equipment, the controls and the operating instructions.

This is publication 50950504, Rev. E, dated May 2021, in English. It applies to the 1350R NXT2 from serial number 188602 and up, and the 1500R NXT2 from serial number 190802 and up. Machines built before those serial numbers belong to the 1350R, 1500R and 1650R book, 50940264M. A later Rev. F, 50950504F, is dated April 2022.

What this manual helps you do

  • Start with the Safety chapter, which has the Mandatory Safety Shutdown Procedure, Safety Reminders and the Safety Decals, plus the Product and Component Plate Locations.
  • Operate the machine with the Safety Interlock System (Hydraloc), the Parking Brake and the Lift Arm Support explained, along with the Battery Disconnect Switch and the Rear Window Emergency Exit.
  • Check the Control Keypad, the Information Center Electronic Display and the Accessory Keypad buttons, so every light and symbol on the dash is known.
  • Attach implements by following Attachment Mounting and the Auxiliary Hydraulic System sections, and learn Lift Arm Float and the optional Hydraglide ride control.
  • Look up Error Codes, Engine Diagnostic Trouble Codes, the Maintenance Schedules and Maintenance Log, engine oil checks and changes, and Specifications.

Who this is for

Rental fleet managers and dealers who hand these two models to new operators will use it for the safety and controls walk-through. Owner-operators and used-machine buyers can use it for the daily checks, service intervals and fault code lookups.

Match your machine's serial number against the ranges above before you order.

Preview of the Mustang 1350R NXT2 and 1500R NXT2 Skid Steer Loader Operator Manual (50950504E) (PDF, sample pages)

Does this manual fit your machine?

Mustang models 1350R NXT2 and 1500R NXT2
Machine type Skid Steer Loader
Publication No. 50950504 (Rev. E)
Edition date May 2021
Serial numbers 1350R NXT2 SN 188602 and Up; 1500R NXT2 SN 190802 and Up

Check the model and serial number on your machine’s serial plate before ordering.

What’s inside

  • Fault / error codes: Error Codes; Engine Diagnostic Trouble Codes (DTC)
  • Troubleshooting: Troubleshooting; Engine Troubleshooting; Seal and Hose Troubleshooting
  • Maintenance intervals / schedule: Maintenance Schedules; Maintenance Log
  • Lubrication, oils, fluids and capacities: General Lubrication; Checking Engine Oil Level; Changing Engine Oil and Filter
  • Technical specifications: Specifications

How this edition differs

Compared with Mustang 1350R NXT2 and 1500R NXT2 Skid Steer Loader Operator Manual (50950504F):

This manual Other edition
Publication No. 50950504E 50950504F
Edition date May 2021 April 2022

Compared with Mustang 1350R, 1500R and 1650R Skid Steer Loader Operator Manual (50940264M):

This manual Other edition
Publication No. 50950504E 50940264M
Serial numbers 1350R NXT2 SN 188602 and Up; 1500R NXT2 SN 190802 and Up 1350R SN 188601 and Before; 1500R SN 190801 and Before
Models covered only by – 1650R

Compared with Mustang 1350R, 1500R and 1650R Skid Steer Loader Operator Manual (50940264N):

This manual Other edition
Publication No. 50950504E 50940264N
Edition date May 2021 April 2022
Serial numbers 1350R NXT2 SN 188602 and Up; 1500R NXT2 SN 190802 and Up 1350R SN 188601 and Before; 1500R SN 190801 and Before
Models covered only by – 1650R

Compared with Mustang 1350R, 1500R, 1650R and 1900R NXT2 Skid Steer Loader Operator Manual:

This manual Other edition
Publication No. 50950504E 50950612EN-USA
Edition date May 2021 March 2024
Serial numbers 1350R NXT2 SN 188602 and Up; 1500R NXT2 SN 190802 and Up 1350R SN 188601 and Before; 1500R SN 190801 and Before
Models covered only by – 1650R, 1900R

FAQ

Where do I find the fault codes?
Error Codes and Engine Diagnostic Trouble Codes (DTC) each have their own headings in the contents. Troubleshooting, Engine Troubleshooting and Seal and Hose Troubleshooting sit alongside them.

Which serial numbers does this book cover?
It covers 1350R NXT2 serial number 188602 and up, and 1500R NXT2 serial number 190802 and up. Earlier 1350R and 1500R machines, and the 1650R, are in book 50940264M.

How does this differ from the 50950504F edition?
This is Rev. E from May 2021, and 50950504F is the April 2022 edition for the same two models. Pick the one that matches the revision you want on hand.

Where are the service intervals and oil changes?
Maintenance Schedules and the Maintenance Log cover the intervals. General Lubrication, Checking Engine Oil Level and Changing Engine Oil and Filter cover the oil work.

More books for this machine

📘 Show Index

Table of Contents:

  • Introduction
    • Safety Symbol and Signal Words
      • Signal Words
    • Contents and Use of this Manual
    • Machine Orientation
    • Proper Machine Use
    • Service and Registration
      • Model and Serial Numbers
    • Fields of Application
      • Using Attachments
    • Vibration Information
    • Fire Extinguisher Location
    • Manufacturer Information
    • Indicator and Operation Symbols
  • Safety
    • Mandatory Safety Shutdown Procedure
    • Safety Reminders
      • Before Starting
      • Additional Safety Equipment
      • During Operation
      • Electrical Energy
      • Maintenance
      • Crystalline Silica Exposure
      • Transporting the Machine
      • Lifting the Machine with a Crane
      • Loading and Transporting the Machine
    • Safety Decals
      • New Decal Application
    • Product and Component Plate Locations
  • SAFETY EQUIPMENT
    • Guards and Shields
    • Operator’s Position
      • Operator’s Seat
      • Seat Belt
      • Upper Torso Restraint (Option)
      • Operator Restraint Bar
    • Safety Interlock System (Hydraloc™)
      • Safety Interlock System Test
    • Parking Brake
    • ROPS/FOPS
    • Rear Window Emergency Exit
    • Lift Arm Support
      • Engage Lift Arm Support
      • Disengage Lift Arm Support
    • Battery Disconnect Switch
  • Indicators and Controls
    • Control Keypad
      • Control Keypad Indicators
      • Control Keypad Buttons
    • Accessory Keypad Indicators/Buttons
    • Optional Lights/Lockout Keypad Indicators/Buttons
    • Information Center Electronic Display
      • Information Center Electronic Display Symbols
      • Information Center Electronic Display Screens
    • Controls
      • Ignition Keyswitch
      • Throttle Controls
      • Travel Drive, Lift and Tilt Controls
        • Drive Control (Left T-Bar)
        • Lift/Tilt Control (Right T-Bar)
        • Drive Control (Left Joystick)
        • Lift/Tilt Control (Right Joystick)
        • Drive Control (Hand Controls)
        • Lift/Tilt Control (Foot Controls)
    • Lift Arm Float
    • Hydraglide™ Ride Control System (Option)
    • Beacon/Position/Work Lights
    • HVAC (Option)
    • Dome Light
    • Accessory Plug
    • Battery Disconnect Switch
    • Attachment Mounting
      • All-Tach® Hitch
      • Power-A-Tach® System
    • Auxiliary Hydraulic System
      • Auxiliary Hydraulic Couplers
      • Auxiliary Hydraulics Control
  • Operation
    • Before Starting the Engine
      • Operational Checks
      • Cab Entry and Exit
    • Starting the Engine
      • Cold-Starting
      • After Starting
      • Warm Up
    • Run-In Period
    • Stopping the Machine
    • Engine Stalling
    • Parking the Machine
    • Brake Release Operation (Option)
    • Jump-starting
    • Travel Drive Operation
      • Two-Speed Drive (Option)
      • Driving on an Incline
      • Driving over Rough Terrain
    • Transport on Public Roads
      • Transport Hydraulics Lock-out (Option)
    • Lift Arm Operation
      • Attachment Transport Position
      • Lift Arm Float
      • Hydraglide™ Ride Control System (Option)
    • Changing Attachments
      • Connecting Attachments
      • Disconnecting Attachments
      • Connecting Auxiliary Hydraulic Couplings
      • Disconnecting Auxiliary Hydraulic Couplings
    • Self-Leveling (Option)
      • Self-Leveling Cancel
    • Using Buckets
      • Digging with a Bucket
      • Loading a Bucket
      • Dumping a Load onto a Pile
      • Loading Trucks (or Hoppers)
      • Backfilling Holes and Embankments
      • Scraping with a Bucket
      • Grading
    • Using Pallet Forks
      • Safety Instructions When Working with Pallet Forks
      • Transporting Loads Using Pallet Forks
    • Loading and Transporting the Machine on a Transport Vehicle
    • Towing
    • Lifting the Machine Using a Crane or Hoist
    • Diesel Particulate Filter (DPF) Regeneration Procedures (DPF Models)
      • Reset Regeneration
      • Stationary Regeneration
      • Forcing Stationary Regeneration
      • DPF Maintenance
    • Camera Observation System
    • Back-Up Alarm
  • Maintenance
    • Maintenance Schedules
    • Maintenance Log
    • General Lubrication
    • Removing Foreign Material
    • Tilting the ROPS/FOPS
      • Raising the ROPS/FOPS
      • Lowering the ROPS/FOPS
    • Lifting the Machine
      • Lowering the Machine
    • Engine Maintenance
      • Engine Access
      • Engine Mounting Hardware Inspection
      • Checking Engine Oil Level
      • Changing Engine Oil and Filter
    • Fuel System Maintenance
      • Adding Fuel
      • Water Separator Maintenance
      • Changing Water Separator Filter
      • Changing Fuel Filter
    • Engine Air Cleaner
      • Changing Air Filter Elements
    • DPF Service (DPF Models)
    • V-Belt Maintenance
    • Cooling System
      • Checking Coolant Level
      • Cleaning Radiator Fins
      • Draining/Flushing Cooling System
    • Hydraulic System
      • Checking Hydraulic Oil Level
      • Changing Hydraulic Oil Filter
      • Changing Hydraulic Oil
      • Hydraulic Hose Maintenance
    • Chaincases
      • Drive Motors
      • Checking and Adding Chaincase Oil
      • Changing Chaincase Oil
      • Drive Chain Tension
    • Seat and Restraint Bar Switches
    • Bucket Cutting Edge
    • Wheel Nuts
    • Tires
      • Mounting Tires
      • Checking Tire Pressure
    • Electrical System
      • Fuses, Relays and Diodes
      • Battery
    • Windshield Washer Reservoir
    • Long-Term Storage
      • Before Storage
      • After Storage
    • Final Shutdown / Decommissioning
      • Before Disposal
      • Machine Disposal
    • Dealer Services
  • Troubleshooting
    • Engine Troubleshooting
    • Indicator Lamp Troubleshooting
    • Seal and Hose Troubleshooting
    • Hydraulic System Troubleshooting
    • Hydrostatic Drive System Troubleshooting
    • Electrical Troubleshooting
    • Error Codes
      • Engine Diagnostic Trouble Codes (DTC)
  • Specifications
    • Fluid Capacities/Lubricants
    • Weights
    • Payloads/Capacities
    • Engine
    • Coolant Compound Mixtures
    • Hydraulics
    • Travel Speeds
    • Electrical System
    • Sound Levels
    • Vibration Levels
    • Dimensions
    • Features
    • Common Materials and Densities
  • Index

Mustang PDF Manuals

Related Manuals

0
0
Your Cart
Your cart is emptyReturn to Shop