$ 0
0
$ 0
0

Mustang 1350R, 1500R, 1650R and 1900R NXT2 Skid Steer Loader Operator Manual (50950612EN-US-A)

Format: PDF (Printable Document)

File Language: English

File Size: 10.96 MB (Speed Download Link)

Brand: Mustang

Models: 1350R, 1500R, 1650R and 1900R NXT2

Machine Type: Skid Steer Loader

Publication No.: 50950612EN-US (Rev. A)

Edition Date: March 2024

Serial No.: 1350R SN 188601 and Before; 1500R SN 190801 and Before

Type of Document: Operator Manual (operation, controls, safety and routine maintenance)

Searchable: Yes, text is searchable and copyable

Delivery: Instant download after payment

Categories: ,

$ 40

Share:

Mustang 1350R, 1500R, 1650R and 1900R NXT2 Skid Steer Loader Operator Manual (50950612EN-US-A)

Publication 50950612EN-US, Rev. A, dated March 2024, is the operator manual for the Mustang 1350R, 1500R, 1650R and 1900R NXT2 skid steer loaders. The serial numbers it lists are 1350R SN 188601 and Before and 1500R SN 190801 and Before.

A lot of these machines change hands with the book gone missing, and a new operator is left guessing at the keypad and the display. This manual is in English and covers safety, the controls, the daily and scheduled service, and the fault code and troubleshooting sections, so a new hire can get up to speed before the first job.

What this manual helps you do

  • Start with the Mandatory Safety Shutdown Procedure and the Safety Reminders, then go through the Safety Interlock System (Hydraloc), the parking brake and the battery disconnect switch.
  • Operate the machine from the Control Keypad, the Information Center Electronic Display and the Controls section, which also covers Lift Arm Float and the optional Two-Speed Drive.
  • Check engine oil level and change the oil and filter by following the steps under General Lubrication.
  • Look up service timing in the Maintenance Schedules and keep your records in the Maintenance Log.
  • Read the Error Codes and Engine Diagnostic Trouble Codes (DTC) tables, then use the Troubleshooting sections for the engine, seals and hoses when a warning shows up.

Who this is for

This suits a landscaping contractor or owner-operator who has a 1350R, 1500R, 1650R or 1900R NXT2 and needs to train seasonal operators. It also helps a rental fleet manager who wants a reference for daily checks and a service log.

Check your serial number against the list before you order, and keep the manual in the cab.

Preview of the Mustang 1350R, 1500R, 1650R and 1900R NXT2 Skid Steer Loader Operator Manual (50950612EN-US-A) (PDF, sample pages)

Does this manual fit your machine?

Mustang models 1350R, 1500R, 1650R and 1900R NXT2
Machine type Skid Steer Loader
Publication No. 50950612EN-US (Rev. A)
Edition date March 2024
Serial numbers 1350R SN 188601 and Before; 1500R SN 190801 and Before

Check the model and serial number on your machine’s serial plate before ordering.

What’s inside

  • Fault / error codes: Error Codes; Engine Diagnostic Trouble Codes (DTC)
  • Troubleshooting: Troubleshooting; Engine Troubleshooting; Seal and Hose Troubleshooting
  • Maintenance intervals / schedule: Maintenance Schedules; Maintenance Log
  • Lubrication, oils, fluids and capacities: General Lubrication; Checking Engine Oil Level; Changing Engine Oil and Filter
  • Technical specifications: Specifications

How this edition differs

Compared with Mustang 1350R NXT2 and 1500R NXT2 Skid Steer Loader Operator Manual (50950504E):

This manual Other edition
Publication No. 50950612EN-USA 50950504E
Edition date March 2024 May 2021
Serial numbers 1350R SN 188601 and Before; 1500R SN 190801 and Before 1350R NXT2 SN 188602 and Up; 1500R NXT2 SN 190802 and Up
Models covered only by 1650R, 1900R –

Compared with Mustang 1350R NXT2 and 1500R NXT2 Skid Steer Loader Operator Manual (50950504F):

This manual Other edition
Publication No. 50950612EN-USA 50950504F
Edition date March 2024 April 2022
Serial numbers 1350R SN 188601 and Before; 1500R SN 190801 and Before 1350R NXT2 SN 188602 and Up; 1500R NXT2 SN 190802 and Up
Models covered only by 1650R, 1900R –

Compared with Mustang 1350R, 1500R and 1650R Skid Steer Loader Operator Manual (50940264M):

This manual Other edition
Publication No. 50950612EN-USA 50940264M
Edition date March 2024 May 2021
Models covered only by 1900R –

Compared with Mustang 1350R, 1500R and 1650R Skid Steer Loader Operator Manual (50940264N):

This manual Other edition
Publication No. 50950612EN-USA 50940264N
Edition date March 2024 April 2022
Models covered only by 1900R –

FAQ

Where do I find the fault codes?
The Error Codes and Engine Diagnostic Trouble Codes (DTC) sections hold them. The Troubleshooting chapters, including engine, seals and hoses, follow for tracing the problem.

Which serial numbers does this edition cover?
It lists 1350R SN 188601 and Before and 1500R SN 190801 and Before. It also includes the 1650R and 1900R.

How does it differ from manuals 50950504E and 50950504F?
Those earlier editions, dated May 2021 and April 2022, cover only the 1350R NXT2 and 1500R NXT2 from SN 188602 and SN 190802 and Up. This one is dated March 2024 and adds the 1650R and 1900R.

Does it explain the controls and options?
Yes. The Indicators and Controls chapter covers the keypads, the display, Two-Speed Drive, Hydraglide ride control, HVAC, lights, attachment mounting and the auxiliary hydraulic system.

📘 Show Index

Table of Contents:

  • Introduction
    • Safety Symbol and Signal Words
      • Signal Words
    • Contents and Use of this Manual
    • Machine Orientation
    • Proper Machine Use
    • Service and Registration
      • Model and Serial Numbers
    • Fields of Application
      • Using Attachments
    • Vibration Information
    • Fire Extinguisher Location
    • Manufacturer Information
    • Indicator and Operation Symbols
  • Safety
    • Mandatory Safety Shutdown Procedure
    • Safety Reminders
      • Before Starting
      • Additional Safety Equipment
      • During Operation
      • Electrical Energy
      • Maintenance
      • Crystalline Silica Exposure
      • Transporting the Machine
      • Lifting the Machine with a Crane
      • Loading and Transporting the Machine
    • Safety Decals
      • New Decal Application
    • Product and Component Plate Locations
  • Safety Equipment
    • Guards and Shields
    • Operator’s Position
      • Operator’s Seat
      • Seat Belt
      • Upper Torso Restraint (Option)
      • Operator Restraint Bar
    • Safety Interlock System (Hydraloc™)
      • Safety Interlock System Test
    • Parking Brake
    • ROPS/FOPS
    • Rear Window Emergency Exit
    • Lift Arm Support
      • Engage Lift Arm Support
      • Disengage Lift Arm Support
    • Battery Disconnect Switch
  • Indicators and Controls
    • Control Keypad
      • Control Keypad Indicators
    • Accessory Keypad Indicators/Buttons
    • Optional Lights/Lockout Keypad Indicators/Buttons
    • Information Center Electronic Display
      • Information Center Electronic Display Symbols
      • Information Center Electronic Display Screens
    • Controls
      • Ignition Keyswitch
      • Throttle Controls
      • Travel Drive, Lift and Tilt Controls
        • Drive Control (Left T-Bar)
        • Lift/Tilt Control (Right T-Bar)
        • Drive Control (Left Joystick)
        • Lift/Tilt Control (Right Joystick)
        • Drive Control (Hand Controls)
        • Lift/Tilt Control (Foot Controls)
    • Two-Speed Drive (Option)
    • Lift Arm Float
    • Hydraglide™ Ride Control System (Option)
    • Beacon/Position/Work Lights
    • HVAC (Option)
    • Dome Light
    • Accessory Plug
    • Battery Disconnect Switch
    • Attachment Mounting
      • All-Tach® Hitch
      • Power-A-Tach® System
      • Activating The Warming Circuit (R165 Models – SN 198401 and Up) and R190 Models
    • Auxiliary Hydraulic System
      • Auxiliary Hydraulic Couplers
      • Auxiliary Hydraulics Control
      • High-Flow Auxiliary Hydraulic Control (Optional for R165 Models and R190 Models)
  • Operation
    • Before Starting the Engine
      • Operational Checks
      • Cab Entry and Exit
    • Starting the Engine
      • Cold-Starting
      • After Starting
      • Warm Up
    • Run-In Period
    • Stopping the Machine
    • Engine Stalling
    • Parking the Machine
    • Brake Release Operation (Option)
    • Jump-starting
    • Travel Drive Operation
      • Two-Speed Drive (Option)
      • Driving on an Incline
      • Driving over Rough Terrain
    • Transport on Public Roads
      • Transport Hydraulics Lock-out (Option)
    • Lift Arm Operation
      • Attachment Transport Position
      • Lift Arm Float
      • Hydraglide™ Ride Control System (Option)
    • Changing Attachments
      • Connecting Attachments
      • Disconnecting Attachments
      • Connecting Auxiliary Hydraulic Couplings
      • Disconnecting Auxiliary Hydraulic Couplings
    • Self-Leveling (Option)
      • Self-Leveling Cancel
    • Using Buckets
      • Digging with a Bucket
      • Loading a Bucket
      • Dumping a Load onto a Pile
      • Loading Trucks (or Hoppers)
      • Backfilling Holes and Embankments
      • Scraping with a Bucket
      • Grading
    • Using Pallet Forks
      • Safety Instructions When Working with Pallet Forks
      • Transporting Loads Using Pallet Forks
    • Loading and Transporting the Machine on a Transport Vehicle
    • Towing
    • Lifting the Machine Using a Crane or Hoist
    • Diesel Particulate Filter (DPF) Regeneration Procedures (DPF Models)
      • Reset Regeneration
      • Stationary Regeneration
      • Forcing Stationary Regeneration
      • DPF Maintenance
    • Camera Observation System
    • Back-Up Alarm
  • Maintenance
    • Maintenance Schedules
    • Maintenance Log
    • General Lubrication
    • Removing Foreign Material
    • Tilting the ROPS/FOPS
      • Raising the ROPS/FOPS
      • Lowering the ROPS/FOPS
    • Lifting the Machine
      • Lowering the Machine
    • Engine Maintenance
      • Engine Access
      • Engine Mounting Hardware Inspection
      • Checking Engine Oil Level
      • Changing Engine Oil and Filter
    • Fuel System Maintenance
      • Adding Fuel
      • Water Separator Maintenance
      • Changing Water Separator Filter
      • Changing Fuel Filter
    • Engine Air Cleaner
      • Changing Air Filter Elements
    • DPF Service (DPF Models)
    • V-Belt Maintenance
    • Cooling System
      • Checking Coolant Level
      • Cleaning Radiator Fins
      • Draining/Flushing Cooling System
    • Hydraulic System
      • Checking Hydraulic Oil Level
      • Changing Hydraulic Oil Filter
      • Changing Hydraulic Oil
      • Hydraulic Hose Maintenance
    • Chaincases
      • Drive Motors
      • Checking and Adding Chaincase Oil
      • Changing Chaincase Oil
      • Drive Chain Tension
    • Seat and Restraint Bar Switches
    • Bucket Cutting Edge
    • Wheel Nuts
    • Tires
      • Mounting Tires
      • Checking Tire Pressure
    • Electrical System
      • Fuses, Relays and Diodes
      • Battery
    • Windshield Washer Reservoir
    • Long-Term Storage
      • Before Storage
      • After Storage
    • Final Shutdown / Decommissioning
      • Before Disposal
      • Machine Disposal
    • Dealer Services
  • Troubleshooting
    • Engine Troubleshooting
    • Indicator Lamp Troubleshooting
    • Seal and Hose Troubleshooting
    • Hydraulic System Troubleshooting
    • Hydrostatic Drive System Troubleshooting
    • Electrical Troubleshooting
    • Error Codes
      • Engine Diagnostic Trouble Codes (DTC)
  • Specifications
    • Fluid Capacities/Lubricants
    • Weights
    • Payloads/Capacities
    • Engine
    • Coolant Compound Mixtures
    • Hydraulics
    • Travel Speeds
    • Electrical System
    • Sound Levels
    • Vibration Levels
    • Dimensions
    • Features
    • Common Materials and Densities
      • Direct and/or Indirect Visibility
  • Index

Mustang PDF Manuals

Related Manuals

0
0
Your Cart
Your cart is emptyReturn to Shop