$ 0
0
$ 0
0

Mustang 2066, 2076 and 2086 Skid Steer Loader Operator Manual (917083G)

Format: PDF (Printable Document)

File Language: English

File Size: 4.98 MB (Speed Download Link)

Brand: Mustang

Models: 2066, 2076 and 2086

Machine Type: Skid Steer Loader

Publication No.: 917083 (Rev. G)

Edition Date: April 2008

Type of Document: Operator Manual (operation, controls, safety and routine maintenance)

Searchable: Yes, text is searchable and copyable

Delivery: Instant download after payment

Categories: ,

$ 40

Share:

Mustang 2066, 2076 and 2086 Skid Steer Loader Operator Manual (917083G)

Open the Safety Decals section first and you will see what this book is about: ANSI-style and ISO-style decals, shown for inside the ROPS/FOPS and in the engine compartment. This is the operator manual for the Mustang 2066, 2076 and 2086 skid steer loaders, and it covers the controls, the safety equipment and the routine care of the machine.

When a used loader comes in without its book, this is the one to get. Whoever takes the machine next gets a straight answer on the controls, the checks and the service schedule. The manual is publication 917083, Rev. G, dated April 2008, in English.

What this manual helps you do

  • Start the loader with the Mandatory Safety Shutdown Procedure and the Safety Interlock System in front of you, so you know what the machine expects from the operator.
  • Operate the machine with the right control layout: T-Bar, T-Bar/Joystick, Joystick, Hand/Foot or Dual-Hand controls are each described.
  • Check the Engine Oil, Engine Oil Filter and Engine Oil Pressure entries when you do the daily walk-round.
  • Adjust chain tension by following the Adjusting Chain Tension steps under Adjustments.
  • Look up Torque Specifications, Loader Specifications and Dimensional Specifications when you need a number, and use the Maintenance Log to record service.

Who this is for

Dealers who prepare 2066, 2076 and 2086 loaders for resale will use it to hand over a complete machine. Owner-operators and rental fleets use it to train new operators and keep up with daily checks and service.

Check the publication number against your loader's paperwork before you buy.

Preview of the Mustang 2066, 2076 and 2086 Skid Steer Loader Operator Manual (917083G) (PDF, sample pages)

Does this manual fit your machine?

Mustang models 2066, 2076 and 2086
Machine type Skid Steer Loader
Publication No. 917083 (Rev. G)
Edition date April 2008

Check the model and serial number on your machine’s serial plate before ordering.

What’s inside

  • Troubleshooting: Troubleshooting
  • Torque values: Torque Specifications
  • Maintenance intervals / schedule: Maintenance Log
  • Lubrication, oils, fluids and capacities: Engine Oil; Engine Oil Filter; Engine Oil Pressure
  • Technical specifications: Specifications; Loader Specifications; Dimensional Specifications
  • Adjustments and calibration: Adjustments; Adjusting Chain Tension

How this edition differs

Compared with Mustang 2066, 2076 and 2086 Skid Steer Loader Operator Manual (917326D):

This manual Other edition
Publication No. 917083G 917326D
Edition date April 2008 January 2012

Compared with Mustang 2066, 2076 and 2086 Skid Steer Loader Operator Manual (Italian):

This manual Other edition
Publication No. 917083G 917309D
Edition date April 2008 January 2012
Language English Italian

FAQ

Where do I find the safety decals and what do they cover?
They sit under Safety Decals, split into ANSI-style and ISO-style sets, each for inside the ROPS/FOPS and for the engine compartment. Product and Component Plate Locations is a separate section.

Which controls does the manual explain?
T-Bar, T-Bar/Joystick, Joystick, Hand/Foot and Dual-Hand controls each have a section. Optional equipment such as the Two-Speed Transmission and Hydraglide ride control is covered too.

Is there help for a fault on the machine?
Yes, there is a Troubleshooting section. Torque Specifications and Adjustments are in the book as well.

How does this edition differ from 917326D?
This is 917083G from April 2008. 917326D is dated January 2012, and an Italian edition, 917309D, carries the same date.

📘 Show Index

Table of Contents:

  • Introduction
    • Loader Identification
    • Control/Indicator Symbols
      • Power Off
      • Power On
      • Engine Start
      • Battery Charge al Power
      • Worklight w/Flasher
      • Worklight
      • Safety Alert
      • Hazard Flasher
      • Seatbelt
      • Horn
      • Volume – Full
      • Volume – Half Full
      • Volume – Empty
      • H-L
      • High – Low
      • Neutral
      • Forward
      • Reverse
      • Parking Brake
      • Engine Air Filter
      • Engine Oil
      • Engine Oil Filter
      • Engine Oil Pressure
      • Fuel Filter
      • Engine Temperature
      • Hydraulic System
      • Hydraulic Oil Temperature
      • Hydraulic Oil Filter
      • Grease Lubrication Point
      • Glow Indicator Lamp
      • Diesel Fuel
      • Chaincase Oil
      • Clockwise Rotation
      • Counterclockwise Rotation
      • Fast
      • Slow
      • Ride Control
      • Engine Malfunction Shutdown
      • Bucket – Float
      • Bucket – Rollback
      • Bucket – Dump
      • Lift Arm – Lower
      • Lift Arm – Raise
      • Service Hours
      • Lift Point
      • Tie-Down
      • Diesel Water Separator
  • Safety
    • Mandatory Safety Shutdown Procedure
    • Safety Reminders
    • Potential Hazards
    • Safety Decals
      • New Decal Application
    • ANSI-Style Safety Decals inside the ROPS/FOPS
    • ANSI-Style Safety Decals in the Engine Compartment
    • ISO-Style (used Internationally) Safety Decals inside the ROPS/FOPS
    • ISO-Style (used Internationally) Safety Decals in the Engine Compartment
    • Product and Component Plate Locations
  • Controls and Safety Equipment
    • Guards and Shields
    • Operator Restraint Bar
    • Operator’s Seat
      • Figure 1 Operator’s Seat
    • Upper-Torso Restraint
    • Safety Interlock System
      • Hydraloc™
      • Testing the Safety Interlock System
    • ROPS/FOPS
    • Parking Brake
      • Figure 2 Parking Brake Switch
    • Horn
    • Rear Window Emergency Exit
    • Lift Arm Support Device
      • Engagement
        • Figure 3 Lift Arm Support Device Engaged
      • Disengagement
        • Figure 4 Lift Arm Support Device Storage Location
    • Accessory Plug
    • Dome Light
    • Work Lights
    • Heater (optional)
    • Heater and Air Conditioner (optional)
      • Figure 5 Heater/ Air Conditioner Controls
    • Engine Speed Control
      • Figure 6 Hand Throttle Lever
      • Figure 7 Foot Throttle (T-Bar, Dual-Hand & T-Bar/Joystick control units)
    • Two-Speed Transmission (optional)
    • Hydraglide™ Ride Control System (optional)
    • Auto-Shutdown System
    • Attachment Mounting
      • All-Tach™ Hitch
        • Figure 8 All-Tach™ Hitch
    • Instrument Panels
      • Figure 9 Left Panel
      • Left Panel
      • Right Panel
        • Figure 10 Right Panel
    • T-Bar Controls
      • Figure 11 T-Bar Controls
      • Drive Controls
      • Lift/Tilt Control
    • T-Bar/Joystick Controls
      • Figure 12 T-Bar/Joystick Controls
      • Drive Controls
      • Lift/Tilt Control
    • Joystick Controls
      • Figure 13 Joystick Controls
      • Drive Controls
      • Lift/Tilt Controls
    • Hand/Foot Controls
      • Figure 14 Hand/Foot Controls
      • Drive Controls
      • Lift/Tilt Controls
    • Dual-Hand Controls
      • Figure 15 Dual-Hand Controls
      • Drive Controls
      • Lift/Tilt Controls
    • Auxiliary Hydraulic Controls
      • Standard-Flow Auxiliary Hydraulic Control
        • Figure 16 T-Bar, Dual Hand & T-Bar/Joystick Auxiliary Hydraulic Control
        • Figure 17 T-Bar/Joystick Electric Auxiliary Control
        • Figure 18 Hand/Foot Auxiliary Control
      • High-Flow Auxiliary Hydraulic Control (optional)
        • Figure 19 High-Flow Control Lever (T-Bar, Dual-Hand & Hand/Foot controlled units)
        • Figure 20 High-Flow Control Lever (T-Bar/Joystick controlled units)
  • Operation
    • Before Starting the Engine
    • Starting the Engine
    • Cold-Starting
    • Cold-Starting Procedure
    • Stopping the Loader
    • Parking the Loader
    • Jump-starting
    • Changing Attachments
      • Connecting Attachments
        • Figure 21 Manual Hitch – disengaged
      • Connecting Auxiliary Hydraulic Couplings
      • Removing Attachments
    • Self-Leveling
    • Using a Bucket
      • Driving over Rough Terrain
      • Driving on an Incline
      • Digging with a Bucket
        • Figure 22 Digging
      • Loading a Bucket
        • Figure 23 Loading
      • Dumping the Load Onto a Pile
      • Dumping the Load Into a Box
        • Figure 24 Dumping Into a Box
      • Dumping the Load Over an Embankment
      • Scraping with a Bucket
        • Figure 25 Scraping
      • Leveling the Ground
        • Figure 26 Leveling the Ground
    • Highway Travel
    • Storing the Loader
    • Transporting the Loader
      • Figure 27 Front Tie-Down
        • Figure 28 Rear Tie-Down
    • Lifting the Loader
      • Figure 29 Single-Point Lift Eye
        • Figure 30 ROPS/FOPS Four-Point Lift Eye
        • Figure 31 ROPS/FOPS Four-Point Lift Eye
  • Service
    • Dealer Services
    • Replacement Parts
    • Loader Raising Procedure
      • Figure 32 Loader Properly Blocked (Tires and wheels removed to show blocks)
    • Loader Lowering Procedure
    • Engine Compartment Access
      • Figure 33 Engine Compartment Access Doors
    • Tilting Back the ROPS/FOPS
      • Figure 34 ROPS/FOPS Lock Mechanism – Engaged
    • Adjustments
      • Control Handles
      • Fuel Sender
      • Engine Speed Control
    • Foreign Material Removal
    • Lubrication
      • Figure 35 Service Locations
    • Chaincases
      • Checking and Adding Oil
        • Figure 36 Fill Plug Location
      • Draining Oil
        • Figure 37 Drain Plug
    • Drive Chains
      • Checking Chain Tension
      • Adjusting Chain Tension
    • Engine Air Cleaner
      • Figure 38 Dual-Element Air Cleaner
      • Access
      • Outer Element
      • Inner Element
      • Reinstallation
    • Engine Service
      • Figure 39 Engine Service Components
      • Checking Engine Mounting Hardware
      • Checking Engine Oil Level
      • Changing Engine Oil and Filter
        • Figure 40 Remote Engine Coolant Drain
      • Changing Fuel Filter
    • Hydraulic System
      • Checking Hydraulic Oil Level
        • Figure 41 Sight Gauge and Fill Tube
      • Changing Hydraulic Oil Filter
        • Figure 42 Hydraulic Oil Filter and Indicator
      • Changing Hydraulic Oil
    • Bucket Cutting Edge
    • Alternator/Fan Belt
    • Wheel Nuts
    • Lift Arm Pivots
    • Cooling System
      • Cleaning the Cooling System
    • Tires
      • Checking Tire Pressure
    • Heater Filters
    • Electrical System
      • Circuit Breakers
      • Battery
  • Troubleshooting
  • Maintenance
    • Maintenance Log
  • Specifications
    • Loader Specifications
    • Standard Features
    • Optional Features
    • Dimensional Specifications
      • 67.5 in (1715 mm), 16.8 ft3 (0.48 m3) Earth & Foundry Bucket w/12 x 16.5 Tires inches mm
      • 75 in (1905 mm), 18.2 ft3 (0.52 m3) Earth & Foundry Bucket w/12 x 16.5 Tires inches mm
    • Capacities and Ratings
      • 2066/2076/2086 (2076 EU/2086 EU)
    • Common Materials and Densities
    • Bucket Selection
  • Torque Specifications
  • Warranty
    • MUSTANG WARRANTY SERVICE INCLUDES
    • MUSTANG WARRANTY DOES NOT INCLUDE
  • Index

Mustang PDF Manuals

Related Manuals

0
0
Your Cart
Your cart is emptyReturn to Shop