$ 0
0
$ 0
0

Mustang 170Z NXT2 Compact Excavator Operator Manual (50940308B)

Format: PDF (Printable Document)

File Language: English

File Size: 5.89 MB (Speed Download Link)

Brand: Mustang

Model: 170Z NXT2

Machine Type: Compact Excavator

Publication No.: 50940308 (Rev. B)

Edition Date: July 2018

Serial No.: Serial Numbers 00701 and Up

Type of Document: Operator Manual (operation, controls, safety and routine maintenance)

Searchable: Yes, text is searchable and copyable

Delivery: Instant download after payment

Categories: ,

$ 40

Share:

Mustang 170Z NXT2 Compact Excavator Operator Manual (50940308B)

A customer calls from the site because the monitor is showing something they have not seen before, or a new operator is about to climb into the cab for the first time. The Mustang 170Z NXT2 compact excavator operator manual is the book to put in their hands.

This is publication 50940308 (Rev. B), edition date July 2018, written in English for serial numbers 00701 and up. It is a later edition than the Mustang 170Z manual, publication 50940104A from June 2012, so check the serial number on your machine against this one before you buy.

What this manual helps you do

  • Start with the safety chapters, which cover basic precautions, operating precautions, servicing precautions and the location of the warning labels on the machine.
  • Check the machine before the engine is turned on, using section 13-1, then follow 13-2 for starting up and 13-3 for what to watch once it is running.
  • Look up the controls in the chapter on control devices: the monitor, switches, control levers and pedals, engine hood, operator's seat and fuses.
  • Follow the Maintenance Table for service intervals, including the separate intervals for work with the hydraulic breaker and the non-periodic services.
  • Read the Troubleshooting section, the torque table and the specifications and dimensional diagrams when a fault or a fastener question comes up.

Who this is for

Rental fleet managers and dealers who hand the 170Z NXT2 over to customers will use it for the walk-around and the first-start briefing. Owner-operators and contractors with a used machine can use it for daily checks, service intervals and fault finding.

Keep the 170Z NXT2 manual with the machine so the next operator can read the start-up checks before the first dig.

Preview of the Mustang 170Z NXT2 Compact Excavator Operator Manual (50940308B) (PDF, sample pages)

Does this manual fit your machine?

Mustang model 170Z NXT2
Machine type Compact Excavator
Publication No. 50940308 (Rev. B)
Edition date July 2018
Serial numbers Serial Numbers 00701 and Up

Check the model and serial number on your machine’s serial plate before ordering.

What’s inside

  • Troubleshooting: Troubleshooting; 17-4. Troubleshooting
  • Torque values: 22-2. Torque table
  • Maintenance intervals / schedule: Maintenance Table; 24-2. Service intervals when using the hydraulic breaker; 25-2. Non-periodic services
  • Technical specifications: SPECIFICATIONS AND DIMENSIONAL DIAGRAMS

How this edition differs

Compared with Mustang 170Z Compact Excavator Operator Manual:

This manual Other edition
Publication No. 50940308B 50940104A
Edition date July 2018 June 2012

FAQ

Where do I find the serial number plates on the machine?
Section 5 gives the location of the machine serial number plate, the engine serial number plate and the EPA emission control plates. Check the machine plate against 00701 and up.

Which section covers precautions for towing and transport?
Both are in the Safety part. Section 8-3 covers precautions for transportation and 8-5 covers precautions for towing.

How does this edition differ from the Mustang 170Z manual?
This one is publication 50940308 (Rev. B) from July 2018 for the 170Z NXT2, serial numbers 00701 and up. The 170Z manual is 50940104A from June 2012.

Where are the service intervals for breaker work?
Section 24-2 lists the service intervals when using the hydraulic breaker. The general Maintenance Table and the non-periodic services in 25-2 sit alongside it.

More books for this machine

📘 Show Index

Table of Contents:

  • 1. Introduction
    • 2. Safety Information
    • 3. Product Overview
    • 3-1. Intended uses
    • 3-2. Break in period
    • 3-3. Conditions to insure compliance with EPA emission standards
    • 4. Operation License
    • 5-1. Location of machine serial number plate
    • 5-2. Location of engine serial number plate
    • 5-3. Location of EPA emission control plates
    • 5-4. Ordering replacement parts and service calls
  • SAFETY
    • 7. Basic Precautions
    • 8. Operating Precautions
    • 8-1. Precautions before starting the engine
    • 8-3. Precautions for transportation
    • 8-4. Precautions for the battery
    • 8-5. Precautions for towing
    • 9. Precautions for Servicing
    • 9-1. Precautions before servicing
    • 9-2. Precautions during servicing
    • 10. Safety Messages (Warning Labels)
    • 10-1. Location of warning labels
  • OPERATION
    • 11. Identification of Important Parts
    • 11-1. Overview of the machine
    • 11-2. Controls and switches
    • 12. Description of Control Devices
    • 12-1. Monitor
    • 12-2. Switches
    • 12-3. Control levers and pedals
    • 12-4. Engine hood
    • 12-6. Operator’s seat
    • 12-7. Fuse
    • 13. Operating Instructions
    • 13-1. Checking before starting the engine
    • 13-2. Starting up the engine
    • 13-3. Operating and checking instructions after starting the engine
    • 13-4. Traveling
    • 13-5. Steering
    • 13-6. Stopping the machine
    • 13-7. Swinging the upper structure
    • 13-8. Operating the implement
    • 13-9. Operating the track gauge change
    • 13-10. Precautions for operating the implement
    • 13-11. Precautions for working
    • 13-13. Escaping from the mud
    • 13-14. Operations using the bucket
    • 13-15. Reversing the bucket
    • 13-16. Parking the machine
    • 13-17. Inspection requirements after completing operation
    • 13-18. Stopping the engine
    • 13-19. Inspection requirements after stopping the engine
    • 13-20. Locking
    • 13-21. Handling the rubber crawlers
    • 13-22. Handling hydraulic P.T.O
    • 14. Transportation
    • 14-1. Loading and unloading the machine
    • 14-2. Precautions for loading the machine
    • 14-3. Precautions for transporting the machine
    • 14-4. Suspending the machine
    • 15. Care and Service in Cold Weather
    • 15-1. Preparing for cold weather
    • 15-2. Precautions after a day's work
    • 15-3. After cold weather ends
    • 16. Long-term Storage
    • 16-1. Before storing
    • 16-2. Storing
    • 16-3. Using the machine again
    • 17. Troubleshooting
    • 17-1. Phenomena that do not constitute faults
    • 17-2. Towing
    • 17-3. If the battery is overdischarged
    • 17-4. Troubleshooting
  • MAINTENANCE
    • 18. Precautions for Servicing
    • 19. Basic Servicing Practices
    • 19-1. Oils, fuel, and cooling water
    • 19-2. Electrical equipment
    • 19-3. Hydraulic system
    • 20. Consumables
    • 21-1. Fuel and oil
    • 21-2. Cooling water
    • 22-1. Required tools
    • 22-2. Torque table
    • 24. Maintenance Table
    • 24-1. Table of service time intervals
    • 24-2. Service intervals when using the hydraulic breaker
    • 25. Procedures for Maintenance
    • 25-1. First services
    • 25-2. Non-periodic services
    • 25-3. Checking before start-up
    • 25-4. Maintenance every 50 service hours
    • 25-5. Maintenance every 100 service hours
    • 25-6. Maintenance every 200 service hours
    • 25-7. Maintenance every 250 service hours
    • 25-8. Maintenance every 400 service hours
    • 25-9. Maintenance every 500 service hours
    • 25-10. Maintenance every 1000 service hours
    • 25-11. Maintenance every 2000 service hours
  • SPECIFICATIONS AND DIMENSIONAL DIAGRAMS
  • OPTIONAL PARTS AND ATTACHMENTS
    • 27. General Precautions
    • 27-1. Safety precautions
    • 27-2. Precautions for mounting an attachment (implement)
    • 28. Maintenance Log
    • 29. Notes

Mustang PDF Manuals

Related Manuals

0
0
Your Cart
Your cart is emptyReturn to Shop