$ 0
0
$ 0
0

Mustang AL608, AL708 and AL708T, Manitou MLA-6, MLA-7 and MLA-T 516 Articulated Loader Operator Manual (50940509G)

Format: PDF (Printable Document)

File Language: English

File Size: 33.97 MB (Speed Download Link)

Brand: Mustang

Models: AL608, AL708 and AL708T

Manitou Equivalent: MLA-6, MLA-7 and MLA-T 516

Machine Type: Articulated Loader

Publication No.: 50940509 (Rev. G)

Edition Date: September 2022

Type of Document: Operator Manual (operation, controls, safety and routine maintenance)

Searchable: Yes, text is searchable and copyable

Delivery: Instant download after payment

Categories: ,

$ 40

Share:

Mustang AL608, AL708 and AL708T, Manitou MLA-6, MLA-7 and MLA-T 516 Articulated Loader Operator Manual (50940509G)

A customer calls to say the articulated loader won't start, or a new operator is climbing into an AL708 for the first time and nobody can find the book. That is when you want the Mustang AL608, AL708 and AL708T operator manual in your hands. It covers the articulated loader from the safety rules through to daily care.

This is Publication No. 50940509, Rev. G, edition date September 2022, in English. The same machines were sold as the Manitou MLA-6, MLA-7 and MLA-T 516, so owners of those models have the right book here. An earlier edition, 50940509F, is dated January 2021, and this one is the newer revision.

What this manual helps you do

  • Start with the Delivery Checklists, Before Starting and Mandatory Safety Shutdown Procedure sections so a new operator begins the right way.
  • Operate with the stability guidance in hand: Articulated Loader Stability, the Telescopic Machines section and Applications with Load-Handling Devices.
  • Check the Maintenance Schedule, Maintenance Interval and Maintenance Log, then use Lubrication and Filter Changes and the Fluids/Lubricants Types and Capacities table for service day.
  • Look up Error Codes, including MCU and Keypad CAN Error Codes and the Yanmar Engine Diagnostic Trouble Codes, when a warning comes up.
  • Follow the Transporting the Machine section for raising the machine with a crane and for loading and hauling it.

Who this is for

Fits owner-operators and rental fleets who need the daily checks, service intervals and fault codes for an AL608, AL708 or AL708T. Also useful to a dealer or used-machine buyer handing the machine to its next operator.

Print the Maintenance Log page and keep it with the machine.

Preview of the Mustang AL608, AL708 and AL708T, Manitou MLA-6, MLA-7 and MLA-T 516 Articulated Loader Operator Manual (50940509G) (PDF, sample pages)

Does this manual fit your machine?

Mustang models AL608, AL708 and AL708T
Manitou models MLA-6, MLA-7 and MLA-T 516
Machine type Articulated Loader
Publication No. 50940509 (Rev. G)
Edition date September 2022

Check the model and serial number on your machine’s serial plate before ordering.

What’s inside

  • Wiring / electrical diagrams: Schematics; Electrical Schematic – Chassis (1 of 3); Electrical Schematic – Chassis (2 of 3)
  • Hydraulic diagrams / schematics: Hydraulic Schematic — Standard (Non-Telescopic Machines); Hydraulic Schematic — with High-Flow/2nd Auxiliary Hydraulics and Hydraglide (Non-Telescopic Machines); Hydraulic Schematic — Standard Auxiliary Hydraulics (Telescopic Machines)
  • Fault / error codes: Error Codes; MCU and Keypad CAN Error Codes; Yanmar Engine Diagnostic Trouble Codes (DTC)
  • Troubleshooting: Troubleshooting; Engine Troubleshooting; Seal and Hose Troubleshooting
  • Torque values: Torque Specifications; SAE Torque Values
  • Maintenance intervals / schedule: Maintenance Schedule; Maintenance Interval; Maintenance Log
  • Lubrication, oils, fluids and capacities: Fluids/Lubricants Types and Capacities; Coolant Compound Table; Lubrication and Filter Changes
  • Technical specifications: Specifications
  • Removal, installation and overhaul procedures: Telescopic Load Arm Wear Pad Replacement; Light Bulb Replacement
  • Adjustments and calibration: Parking Brake Adjustment/Service; LLMI Calibration (EU Telescopic Machines Only); Parking Brake Cable Adjustment

How this edition differs

Compared with Mustang AL608, AL708 and AL708T, Manitou MLA-6, MLA-7 and MLA-T 516 Articulated Loader Operator Manual (50940509F):

This manual Other edition
Publication No. 50940509G 50940509F
Edition date September 2022 January 2021

FAQ

Where do I find the fluid and coolant information?
Open Fluids/Lubricants Types and Capacities for the fluids and capacities. The Coolant Compound Table sits alongside it.

Does it explain fault codes?
Yes. The Error Codes section has MCU and Keypad CAN Error Codes and Yanmar Engine Diagnostic Trouble Codes (DTC). Engine, seal and hose troubleshooting sections follow.

Are there any adjustment or replacement procedures?
Yes. It has Parking Brake Adjustment/Service, Parking Brake Cable Adjustment, Telescopic Load Arm Wear Pad Replacement and Light Bulb Replacement. LLMI Calibration is included for EU telescopic machines.

Does it include diagrams and torque values?
Yes. There are electrical schematics for the chassis, hydraulic schematics for telescopic and non-telescopic machines, and SAE Torque Values under Torque Specifications.

More books for this machine

📘 Show Index

Table of Contents:

  • Delivery Checklists
  • Introduction
    • Safety Symbol
    • Legal Notices
      • Software IP
      • Data Privacy
    • Contents and Use of this Manual
    • Safety Symbol and Signal Words
      • Safety Alert Symbol
      • Signal Words
    • Machine Orientation
    • Proper Machine Use
    • Service and Registration
      • Machine Model and Serial Numbers
      • Component Serial Numbers
    • Component Identification
      • Non-telescopic Machines
      • Telescopic Machines
    • Attachments
    • Using Attachments
    • Vibration Information
      • Vibration Measurement and Actions
      • Vibration Levels
    • Fire Extinguisher
    • Manufacturer Information
    • Indicator and Operation Symbols
  • Safety
    • Safety Symbol and Signal Words
      • Safety Alert Symbol
      • Signal Words
    • Mandatory Safety Shutdown Procedure
    • Before Starting
    • During Operation
    • Provision for Stability/Avoiding Rollover and Tipover Accidents
    • Telescopic Machines
    • Articulated Loader Stability
      • Effect of Load Arm Lowering on Stability
      • Effect of Load Arm Extension on Stability (Telescopic Machines Only)
      • Effect of Uneven or Unstable Ground on Stability
      • Effect of Machine Travel on Stability
      • Effect of Load Movement on Stability
    • Applications with Load-Handling Devices
    • Parking the Machine
    • Electrical Energy
    • Maintenance and Service Safety Practices
    • Battery Hazards
    • Fire Hazards
    • Additional Safety Equipment
    • Crystalline Silica Exposure
    • Transporting the Machine
    • Raising the Machine with a Crane
    • Loading and Transporting the Machine
    • Safety Decals
      • New Decal Application
      • Non-Telescopic Machines
      • Telescopic Machines
    • ANSI-Style and Common Safety Decal Locations
    • ISO-Style Safety Decal Locations
  • Specifications
    • Fluids/Lubricants Types and Capacities
    • Payloads/Capacities
      • Non-Telescopic Machines
      • Telescopic Machines
    • Dimensions
      • Non-Telescopic Machines
      • Telescopic Machines
    • Weights
    • Coolant Compound Table
    • Wheels/Tires
    • Engine
    • Hydraulic System
      • Drive Hydraulics
      • Work Hydraulics
    • Sound Power/Pressure Levels (Non-Telescopic Machines)
    • Sound Power/Pressure Levels (Telescopic Machines)
    • Vibration Levels
    • Common Materials and Densities
  • Indicators and Controls
    • Multi-Function Display
      • Multi-Function Display Symbols
      • Multi-Function Display Screens
    • Control Keypad
    • Switch Panel
      • Audible Alerts
    • Telescopic Machines Load/Level Indicators (Telescopic Machines)
      • Load Arm Angle Indicator (Telescopic Machines)
      • Load Arm Extension Indicator (Domestic Telescopic Machines Only)
      • Longitudinal Load Moment Indicator (LLMI) (EU Telescopic Machines Only)
      • Lateral Level Indicator (Telescopic Machines)
    • Ignition Switch
    • Operator’s Seat/Armrest
    • Multi-Function Joystick
      • Load Arm/Attachment Tilt Control
      • Telescopic Load Arm Extend/Retract Control Switch (Telescopic Machines)
      • Non-Telescopic Machines Float Controls
      • Telescopic Machines Raise Float Controls
      • Travel Direction Switch
      • Travel Speed Range Selection Button
      • Differential Lock Button
      • Auxiliary Hydraulics Control Switch
    • Parking Brake
      • Parking Brake Adjustment/Service
    • Control Lever (Option)
    • Throttle Controls
    • Travel Controls
      • Travel Direction Switch
      • Travel Pedal
      • Brake/Inching Pedal
      • Steering Wheel
    • High/Low Travel Speed Selection
    • Constant Speed (Option)
    • Differential Lock
    • Engine Off Load Arm Lower
      • Non-Telescopic Machines
      • Telescopic Machines
    • Hydraulics Transport Lock-out
    • Attachment Mounting
      • Quick Attachment Hitch
    • Auxiliary Hydraulic System
      • Auxiliary Circuit Pressure Relief
      • Auxiliary Hydraulic Control
    • Hydraglide™ Button (Option)
    • Cooling Fan Rotation Reversing Button
    • Cab Heat and Air Conditioning (HVAC)
    • Work Lights Button
    • Load Arm Lights Button (Telescopic Machines Only)
    • Beacon (Option)
    • Windshield Wiper/Washer and Defrost
      • Windshield Wiper Button
      • Windshield Washer Button
      • Washer Fluid Reservoir
      • Rear Window/Washer Switch
      • Rear Window Defrost Switch
    • 12V Accessory Power Outlet
    • External 12V Attachment Power Connections (Option)
      • 12V Attachment Power Controls
      • External 12V Attachment Power Extension Harness
    • Battery Disconnect Switch
  • Operation
    • Operational Checks
      • Pre-Start Checks
      • Checks During Operation
      • Parking Checks
    • Before Operation
      • Cab Entry and Exit
      • Cab Door (Option)
      • Cab Window Latches
      • Emergency Exit
      • Right Window Stop
      • Operator’s Seat Adjustment
      • Armrest Height Adjustment
    • Seat Belt
      • Fastening/Unfastening the Seat Belt
    • Dome Light
    • Starting the Engine
      • Cold-Starting
      • After Starting
    • Engine Warm Up
    • Run-In Period
    • Stopping the Engine
    • Engine Stalling
    • Safety Interlock System (Hydraloc™)
      • Safety Interlock System Test
    • Travel Drive Operation
      • High/Low and Optional 3-Speed Travel Speed Modes
      • Differential Lock Operation
    • Constant Speed Operation (Option)
      • Travel Drive Error Condition Operation (Limited and Safe Modes)
      • Backup Alarm (Option)
    • Special Considerations for Telescopic Machines
      • Telescopic Load Arm Operation
      • Longitudinal Load Moment Indicator (LLMI) – EU Telescopic Machines Only
    • Load Arm Operation
      • Load Arm Travel Position
      • Load Arm/Attachment Tilt Operation
      • Engine Off Load Arm Lower (Non-Telescopic Machines)
      • Non-Telescopic Machines Float Operation (Raise and Tilt)
      • Telescopic Machines Raise Float Operation
      • Load Arm Extend/Retract (Telescopic Machines Only)
    • Load Arm Raise/Tilt Support (Non-Telescopic Machines Only)
      • Engage Load Arm Support
      • Disengage Load Arm Support
      • Engage Tilt Support
      • Disengage Tilt Support
    • Self-Leveling and Return-To Dig
      • Self-Leveling (Load Arm Raise)
      • Return to Dig (Load Arm Lower)
    • Hydraglide™ Ride Control System (Option)
    • Hydraulics Transport Lock-Out Operation
    • Connecting/Disconnecting Attachments
      • Power-A-Tach® System Hitch Operation
      • Euro-Style and 4-Point Hitch Operation
    • Powering Attachments with Hydraulic Function
      • Connecting Hydraulic Attachments to the Auxiliary Hydraulic Circuits
      • Disconnecting Hydraulic Attachments from the Auxiliary Hydraulics Circuit
      • Auxiliary Hydraulics Operation
    • 14-Pin Connector (Option)
      • Switch / Pin Assignments
    • Working with Buckets
      • Digging Tips
      • Safety Instructions When Working with Buckets
      • Working with Buckets
    • Working with Pallet Forks
      • Safety Instructions When Working with Pallet Forks
      • Moving Loads Using Pallet Forks
    • Diesel Particulate Filter (DPF) Regeneration Procedures
      • Reset Regeneration
      • Stationary Regeneration
      • DPF Maintenance
    • After Operation
    • Jump-Starting
    • Raising the Machine using a Crane
      • Crane Lifting Preparation
    • Towing
      • Precautions
      • Preparation
      • Towing Procedure
      • After Towing
    • Loading and Transporting the Machine on a Transport Vehicle
      • Loading and Securing the Machine
  • Maintenance
    • Maintenance Schedule
      • Checks, Cleaning and Inspection
      • Leakage Check
      • Lubrication and Filter Changes
      • Functional Check
    • Maintenance Interval
    • General Lubrication
      • Non-Telescopic Machines
      • Telescopic Machines
      • General Lubrication Detail
    • Telescopic Load Arm Maintenance (Telescopic Machines Only)
      • Telescopic Load Arm Section Lubrication
      • Telescopic Load Arm Wear Pad Replacement
    • LLMI Calibration (EU Telescopic Machines Only)
    • Engine Maintenance
      • Engine Oil
      • Engine Air Filters
      • Changing Air Filter Elements
      • Engine Cooling System
      • Belt Maintenance
    • DPF Service
    • Fuel System Maintenance
      • Adding Fuel
      • Water Separator Inspection/Maintenance
      • Changing Fuel Filter
    • Hydraulic System Maintenance
      • Checking Hydraulic Oil Level
      • Changing Hydraulic Oil
      • Changing Hydraulic Filter
    • Hydraulic Hose Maintenance
    • Planetary Axles
      • Changing Axle Wheel Hub Oil
      • Changing Axle Center Oil
    • Brake Fluid Reservoir
      • Checking/Replenishing Brake Fluid Reservoir Level
    • Parking Brake Adjustment/Service
      • Parking Brake Cable Adjustment
      • Parking Brake Actuator Bracket Adjustment
    • Wheels and Tires
      • Wheel Fasteners
      • Tires
    • Travel Motor Lubrication
    • Road Lights Adjustment
    • Electrical System
      • Battery
      • Using a Booster Battery (Jump-Starting)
      • Fuses and Relays
      • CAN Resistor
      • Chassis Grounds
      • Light Bulb Replacement
      • 14-Pin Connector Fuses, Diodes and Relays (Option)
    • HVAC/Air Conditioning Maintenance
      • HVAC Filters
      • Air Conditioning Compressor Belt
    • Windshield Washer Reservoir
    • Long-Term Storage
      • Before Storage
      • After Storage
    • Final Shutdown / Decommissioning
      • Before Disposal
      • Machine Disposal
    • Maintenance Log
  • Troubleshooting
    • Engine Troubleshooting
    • Indicator Lamp Troubleshooting
    • Seal and Hose Troubleshooting
    • Hydraulic System Troubleshooting
    • Hydrostatic Travel Drive System Troubleshooting
    • Electrical Troubleshooting
      • Electrical Inputs/Outputs
    • Error Codes
      • MCU and Keypad CAN Error Codes
      • Yanmar Engine Diagnostic Trouble Codes (DTC)
      • Deutz Engine Diagnostic Trouble Codes (DTC)
      • Travel Drive Control Module Error Codes
      • Pump and Drive Motor Error Codes
  • Schematics
    • Hydraulic Schematic — Standard (Non-Telescopic Machines)
    • Hydraulic Schematic — with High-Flow/2nd Auxiliary Hydraulics and Hydraglide (Non-Telescopic Machines)
    • Hydraulic Schematic — Standard Auxiliary Hydraulics (Telescopic Machines)
    • Hydraulic Schematic — Standard Auxiliary Hydraulics with Options (Telescopic Machines)
    • Hydraulic Schematic — High-Flow Auxiliary Hydraulics (Telescopic Machines)
    • Hydraulic Schematic — High-Flow Auxiliary Hydraulics with Options (Telescopic Machines)
    • Electrical Schematic – Chassis (1 of 3)
    • Electrical Schematic – Chassis (2 of 3)
    • Electrical Schematic – Chassis – Switch Panel Splices (3 of 3)
    • Electrical Schematic – Chassis – Rear Frame (1 of 2)
    • Electrical Schematic – Chassis – Rear Frame (2 of 2)
    • Electrical Schematic – Chassis – Front Frame/Headlights (Non-Telescopic Machines)
    • Electrical Schematic – Chassis – Front Frame/Headlights (Telescopic Machines) (1 of 2)
    • Electrical Schematic – Chassis – Front Frame/Headlights (Telescopic Machines) (2 of 2)
    • Electrical Schematic – Enclosed ROPS/FOPS
    • Electrical Schematic – HVAC
    • Electrical Schematic – Open ROPS/FOPS
    • Electrical Schematic – 608 / MLA-6 Engine (Yanmar 4TNV98CT-PGWL/1V)
    • Electrical Schematic — 700 Series Engine (Deutz TD3.6L4 — Non-DPF Equipped) (1 of 2)
    • Electrical Schematic — 700 Series Engine (Deutz TD3.6L4 — Non-DPF Equipped) (2 of 2)
    • Electrical Schematic — 700 Series Engine (Deutz TD3.6L4 — DPF Equipped)
    • Electrical Schematic — Electrical Auxiliary Circuits
    • Electrical Schematic — Rear Lights Connection
    • Electrical Schematic — 14-Pin Auxiliary Circuit
    • Electrical Schematic — Turn Signal/Radio Jumpers
  • EC Declaration of Conformity
  • Index
  • Torque Specifications
    • SAE Torque Values

Mustang PDF Manuals

Related Manuals

0
0
Your Cart
Your cart is emptyReturn to Shop