Tadano AML-B Load Moment Indicator Service Manual

The AML-B is the load moment indicator on a Tadano crane. It monitors loading, reads the boom and cylinder sensors, and warns the operator before the crane gets into an overload condition. When a reading drifts or a fault code shows up, the person with the wrench needs the maintenance and adjustment procedures. That’s what this service manual is for.

What this manual helps you do

• Trace the AML system components and how they connect, starting from the system description.
• Diagnose faults using the error codes and error messages section.
• Adjust the boom length detector and the telescopic cylinder length detector.
• Set moment and work radius using the A3 Moment Adj procedure.
• Verify pump control output with A5 Pump Adj, and use A7 Do for Adj for hydraulic pressure adjustment.

Who this is for

A crane service technician or rental fleet mechanic who has to get an LMI reading back in line. Also an independent repair shop that sees an AML-B come in with no paperwork. If you’re in the maintenance mode or adjustment mode screens, you’ll want this open next to you.

FAQ

Q: What do I receive and how is it organised?

A: You get the full set: 3 PDF files, 116 pages in total, in English. Manual 1 is the main manual at 63 pages, and the second is Publication AML-B_ServiceManual-Vol.2_08 at 53 pages. The text is searchable, so you can jump straight to an error code.

Q: Which machine does it fit?

A: It is written for the Tadano AML-B load moment indicator. The titles seen on it are AML-B Maintenance and Adjustment Manual and Pressure Transducer Calibration Adjustment.

Q: How does it fit my job?

A: It runs from basic operation and the maintenance mode through to the adjustment mode. That’s the order you’d work in when diagnosing a fault and then calibrating the sensors afterward.

If you’re chasing an AML-B error code or recalibrating after a repair, this gives you the procedures to do it at the bench or on the crane.

Click here to view the preview (PDF)

Table of Contents:

• Manual 1 (63 pages)
  • Part-1 AML system component
  • Part-2 Basic Operation
  • Display of Maintenance and Adjustment Mode
  • Part-3 Maintenance Mode Operation
  • Part-4 Error Codes and Error Messages
  • Part-5 Adjustment Mode Operation
  • Boom Length Detector Adjustment
  • Telescopic Cylinder Length Detector Adjustment
  • A3. Moment Adj (Moment and Work Radius Adjustment)
  • A5. Pump Adj (Pump Control Output Adjustment)
  • A7. Do for Adj (Digital output only for adjustment of hydraulic pressure)
• Publication AML-B_ServiceManual-Vol.2_08 (53 pages)

Tadano PDF Manuals

All Crane Manuals