A Tadano ATF 100-5 is a multi-axle all terrain crane. It drives to site on public roads, sets up on outriggers and lifts with a telescopic boom. This manual is for the person taking over that crane, whether a new or relief operator who needs the controls and setup sequence laid out, or a fleet that wants the operating rules in the cab.
What this manual helps you do
- Read the instructions for the operating company and the instructions for the crane operator before the crane goes to work.
- Follow the steps to be taken before crane operation, including the acceptance inspection.
- Plan a lift with applications planning, supporting forces charts and the counterweight variants 6.4 t and 21,4 t.
- Check how wind speeds are taken into account and how to ground the crane and the load.
- Learn the engine, axles, wheels and tires, electrical equipment, heating system and fuel system as an operator deals with them.
Who this is for
Crane operators and relief operators will use it to learn the layout and the working sequence on this model. Rental companies and fleet managers keep it on file so every handover starts from the same written rules.
FAQ
Q: What do I receive and how is it organised?
A: You get the set: 3 PDF files, 2,003 pages in total, in English and German. It holds 2 manuals: the main manual, OM_DE_ATF100-5_90074 (1,967 pages), and Publication ATF-1300XL-(U)-1D (36 pages). The text is searchable and can be copied.
Q: Which machine does it fit?
A: It is written for the Tadano ATF 100-5 all terrain crane, and the main manual carries the title "ATF 100-5 Operating Instruction".
Q: How does it fit my job?
A: If you run, hand over or hire out this crane, it gives you the operating rules, the pre-operation steps and the lift planning sections in one place. You can search a term such as counterweight or wind speeds and go straight to it.
Keep the set with the crane, and brief each new operator from it before they climb into the cab.
Click here to view the preview (PDF)
📘 Show Index
Table of Contents:
- Publication OM_DE_ATF100-5_90074 (1,967 pages)
- How to use this Operating Manual
- troubleshooting
- Handling this Operating Manual
- Instructions for the operating company
- Instructions for avoiding damage
- Instructions for mobile cranes travelling on public roads and trunk roads
- Steps to be taken before crane operation
- Instructions for crane operation
- Prevention of damage due to poor maintenance
- Instructions for the crane operator
- Mounting locations of the vehicle identification number and of the nameplates
- General technical details (Chassis)
- Dimensions and weights
- Driving performance data (according to DIN 70020)
- Technical details of components (chassis)
- Engine
- Gearbox
- Transfer box
- Axles
- Axle suspension
- Power transmission
- Wheels and tires
- Brake system
- Steering
- Electrical equipment
- Instruments
- Driver's cab in chassis
- Heating system
- Frame
- Outriggers
- Fuel system
- Tools, accessories
- Painting
- Optional equipment
- Technical details of components (superstructure)
- Hydraulic system of superstructure
- Hoisting gear
- Telescopic boom
- Boom elevation
- Slewing gear
- Safety equipment
- Counterweight
- Electronic Automatic Safe Load Indicator (ASLI)
- Superstructure cabin
- Acceptance inspection
- Optional equipment in the superstructure
- Noise level when the engine is operating under load and at max. engine speed
- Vibrations in the crane cabin during crane work
- Notes referring to the load (lifting capacity) and supporting forces charts
- Explanation regarding a load chart
- Supporting forces charts
- Counterweights
- Counterweight variant 7.3 t
- Counterweight variant 6.4 t
- Counterweight variant 10.0 t
- Counterweight variant 14,0 t
- Counterweight variant 21,4 t
- Counterweight variant 25.0 t
- Requirements and conditions for vehicles used in public road traffic
- Applications planning
- Supporting the crane by outriggers
- Hoist winch and reeving of the winch rope
- Taking account of the wind speeds
- Crane work with a load
- Work in the vicinity of electrical overhead lines
- Grounding the crane and the load
- Work in the vicinity of supply lines
- Notes referring to crane operation
- Instruction Sheet for Overload Safety Devices for Boom Cranes (excerpts)
- Publication ATF-1300XL-(U)-1D (36 pages)
Tadano PDF Manuals
All Crane Manuals
