Tadano TR-300XL Rough Terrain Crane Service Manual

A rough terrain crane like the TR-300XL works uneven job sites with a single cab, a telescopic boom and outriggers to set it level. When one of these comes into the shop with a hydraulic leak, a drive problem or a fault you can't pin down, you need the workshop book open on the bench. This service manual is for the person doing the repair, not the person running the crane.

What this manual helps you do

• Trace hydraulic circuits when a function is slow, weak or dead.
• Follow removal and disassembly steps for pumps, motors and cylinders before you rebuild them.
• Adjust and test components after repair, using the procedures a service manual like this usually gives.
• Diagnose electrical faults and check what a fault code is telling you.
• Replace worn components in the engine and drive train, steering and brakes, and axles and suspension.

Who this is for

Crane service technicians, rental fleet mechanics and independent repair shops that fix these machines in-house. It also suits dealer technicians and plant maintenance crews who inherited a used crane with no paperwork.

FAQ

Q: What do I receive and how is it organised?

A: You get one PDF file, 461 pages, in English. You'd expect it to be laid out by system, so you can go straight to the section for the job in front of you.

Q: Which machine does it fit?

A: It's the TR-300XL Hydraulic Crane Service Manual, publication number TR-250E(U)-2-R-01. The cover shows serial number 530266 and up, so check your crane's serial plate against that.

Q: How does it fit the job I'm doing?

A: If you're pulling a component, rebuilding it or chasing a fault, this is the workshop-level reference for that work. Use it for the hydraulic system, superstructure and slewing, telescopic boom and hoist, outriggers and the rest of the machine.

Download it, open it to the system you're working on, and get the crane back on site.

Click here to view the preview (PDF)

Does this manual fit your machine?

The serial number shown is the one printed on the manual cover. Check the model and serial number on your machine's data plate before ordering.

Table of Contents:

General outline of the sections covered in a service manual of this type. Actual chapter numbering and section names vary by model and edition.

• Foreword and safety information
• General information and specifications
• Carrier chassis, axles and suspension
• Engine and drive train
• Steering and brakes
• Hydraulic system
• Cab and controls
• Superstructure and slewing
• Telescopic boom and hoist
• Outriggers
• Electrical system
• Maintenance and adjustment
• Troubleshooting
• Service data

Tadano PDF Manuals

All Crane Manuals