A Tadano ATF 80-4 is a multi-axle all terrain crane. It drives to site on public roads, then sets up and lifts with its telescopic boom. A rental fleet manager who wants every document for one model in one place is the person who reaches for this set, so operators, mechanics and the parts desk all work from the same files.
What this manual set helps you do
- Operate the crane safely by following the operator manual, titled "ATF 80-4 Operating Service Maintenance Manual", which covers technical details, safety instructions, and notes on load charts and supporting forces.
- Order parts by working from the parts manual, the "ATF 80-4 Spare Parts List", with sections for chassis, crane and annex.
- Trace hydraulic and electrical circuits in the schematics when a fault needs chasing.
- Verify inspections with the included inspection forms, and read the component manuals for the load moment limiter, steering and transmission.
- Plan training and diagnostics with the training documents and the diagnostic documents and software.
Who this is for
A rental fleet manager keeping several crews on one machine type gets one set for the whole operation. A workshop taking on an ATF 80-4 that arrived without paperwork can also rebuild its document file from this download.
FAQ
Q: What do I receive and how is it organised?
A: You get 279 files (145 PDF) with 16,176 PDF pages in total, and the text can be searched and copied. The operator manual is 6,167 pages in 9 files in English and German, and the parts manual is 9,137 pages in 6 files in English, German and French.
Q: Which machine does it fit?
A: It is made for the Tadano ATF 80-4 all terrain crane. The component manuals cover the PAT IK 350 – 1365 and PAT PDC load moment indicators, the ZF 7421 steering system and the ZF AS Tronic 2 transmission.
Q: How does it fit my job?
A: The set also includes schematics (9 files, 84 pages), technical data, service information, assembly and installation files and other documents. Your operators, mechanics and parts desk can each open what they need from one download.
Put the whole ATF 80-4 file in front of your team and keep the crane working from one source.
📘 Show Index
Table of Contents:
Operator Manual Table of Contents
6,167 pages, 9 files
- Manual 1 (1,019 pages)
- Part A) Technical Details
- General technical details (chassis)
- Dimensions and weights
- Driving performance data (according to DIN 70020)
- Technical details of components (chassis)
- Technical details of components (superstructure)
- Illustration of the vehicle
- Notes referring to the load (lifting capacity) and supporting forces charts
- Explanation regarding a load chart
- Supporting forces charts
- Generally
- Part B.0) Safety Instructions
- Safety instructions
- Requirements and conditions for vehicles used in public road traffic
- Traveling
- Towing Machine
- Instructions for the crane operator
- Applications planning
- Potential causes of accidents
- Fire, smoke, inflammation and explosion hazard
- Part B) Operating Instructions – B1) Chassis
- General instructions concerning operation of the vehicle
- Warning and instruction plates in the chassis
- Components, assemblies – installation location and position
- Transport condition of the crane when used in public road traffic
- Driver's cab
- Explanation of the control elements and of the equipment
- Seat adjustment n
- Adjustment of the steering wheel
- How to put the machine into operation
- Steps to be taken and checks to be made before start-up
- Operation of the electrical equipment of the chassis
- air circulation and air conditioner**)
- Gearshift and driving operation
- Gearshift
- Transfer box
- Brakes
- Stabilizing the vehicle by outriggers
- Locking the axle suspension
- Control of the electric outrigger actuation
- Outrigger operation from the chassis
- Emergency control features
- Emergency control of the hydraulic system
- Operation in winter
- Engine
- Gearbox
- Warming up the hydraulic oil or changing the oil type
- Steps for access to the superstructure
- Attachments, optional equipment and accessories
- Instrument panel – chassis
- Pilot, indicator and warning lamps
- Other components
- Instruments
- Part B0) Safety Instructions – B2) Superstructur
- Instructions for crane operation
- Crane application in accordance with the intended use
- Crane application not in accordance with the intended use
- Lifting Capacities of Crane
- Publication de_FA020_B_15_00_00_FA013 (37 pages)
- Publication OM_EN_FA020 / Serial No. WFN4 RTY N9 54085… (1,562 pages)
- Part B0) Safety Instructions
- Requirements and conditions for vehicles used in public road traffic
- Instructions for the crane operator
- Instruction Sheet for Overload Safety Devices for Boom Cranes (excerpts)
- Preface
- How to use this Operating Manual
- troubleshooting
- Handling of this Operating Manual
- Instructions for the operating company
- Mounting locations of the vehicle identification number and of the nameplates
- Part A) Technical Details
- General technical details (chassis)
- Technical details of components (chassis)
- Technical details of components (superstructure)
- Notes referring to the load (lifting capacity) and supporting forces charts
- Part B) Operating Instructions
- General instructions concerning operation of the vehicle
- Driver's cab (chassis)
- How to put the crane carrier into operation
- Gearshift and driving operation in the crane carrier
- Preparations in the chassis for crane operation
- Emergency control features in the chassis
- Operation in winter
- Instrument panel – chassis
- Attachments, optional equipment and accessories in the chassis
- General information about operation of the crane superstructure
- Steps for access to the superstructure
- Control elements in the crane cabin
- How to put the crane superstructure into operation
- actuation of the outriggers from the superstructure
- Serial No. WFN4 RTY N9 62043…, WFN4 RTY N9 62043 (3,549 pages)
- Part A) Technical Details
- General technical details (chassis)
- Dimensions and weights
- Driving performance data (according to DIN 70020)
- Technical details of components (chassis)
- Technical details of components (superstructure)
- Illustration of the vehicle
- Notes referring to the load (lifting capacity) and supporting forces charts
- Explanation regarding a load chart
- Supporting forces charts
- Part B.0) Safety Instructions
- Requirements and conditions for vehicles used in public road traffic
- Instructions for the crane operator
- Applications planning
- Steps to be taken before crane operation
- Supporting the crane by outriggers
- Instruction Sheet for Overload Safety Devices for Boom Cranes (excerpts)
- Part B) Operating Instructions – B1) Chassis
- General instructions concerning operation of the vehicle
- Warning and instruction plates
- Location of warning and instruction plates
- Components, assemblies – installation location and position
- Driver's cab
- Explanation of the control elements and of the equipment
- Seat adjustment n
- Adjustment of the steering wheel
- How to put the machine into operation
- Steps to be taken and checks to be made before start-up
- Operation of the electrical equipment of the chassis
- air circulation and air conditioner**)
- Gearshift and driving operation
- Gearbox
- Transfer box
- Brakes
- Outrigger the vehicle
- Locking the axle suspension
- Control of the electric outrigger actuation
- Outrigger operation from the chassis
- Emergency control features
- Emergency control of the hydraulic system
- Operation in winter
- Engine
- Gearbox
- Warming up the hydraulic oil or changing the oil type
- Steps for access to the superstructure
- Attachments, optional equipment and accessories
- Instrument panel – chassis
- Pilot, indicator and warning lamps
- Other components
- Instruments
- Part B) Operating Instructions – B2) Superstructure
- General information
- Warning and instruction plates
- Location of warning and instruction plates
- Components, assemblies – installation location and position
- Crane cabin
- Explanation – control elements
- Adjustment of the seat in the superstructure
- Roller sun visor – skylight
- Gearshift, driving and outrigger operation from the superstructure
Parts Manual Table of Contents
9,137 pages, 6 files
Also in this set
- Schematics (9 files, 84 pages)
- Technical data (158 files, 113 pages)
- Service information (5 files, 17 pages)
- Assembly and installation (4 files, 4 pages)
- Diagnostic documents and software (39 files, 193 pages)
- Training documents (13 files, 30 pages)
- Inspection forms (1 file, 34 pages)
- Component manuals (18 files, 397 pages)
- PAT IK 350 – 1365 Load Moment Indicator
- PAT PDC Load Moment Indicator
- ZF 7421 Steering System
- ZF AS Tronic 2 Transmission
- CDs and software (8 files)
- Auswert V3.04 Setup01 deutsch
- Other documents (9 files)
Tadano PDF Manuals
All Crane Manuals
