$ 0
0
$ 0
0

Mustang 2056 Skid Steer Loader Operator Manual (917402D)

Format: PDF (Printable Document)

File Language: English

File Size: 2.50 MB (Speed Download Link)

Brand: Mustang

Model: 2056

Machine Type: Skid Steer Loader

Publication No.: 917402 (Rev. D)

Edition Date: March 2010

Type of Document: Operator Manual (operation, controls, safety and routine maintenance)

Searchable: Yes, text is searchable and copyable

Delivery: Instant download after payment

Categories: ,

$ 40

Share:

Mustang 2056 Skid Steer Loader Operator Manual (917402D)

On a 2056 I check the restraint bar, the interlock and the parking brake before anything else, because buyers test those first. This operator manual for the Mustang 2056 skid steer loader covers them, along with the hand/foot controls, the dual-hand controls, the heater and the optional two-speed transmission.

It is publication 917402 (Rev. D), dated March 2010, in English. A different edition of the 2056 operator manual exists as 50950014A, dated August 2011 and listed for SN 003301 and up, so match the publication number to the book your machine needs.

What this manual helps you do

  • Start the machine by the book, with the safety interlock system, the operator restraint bar and the Mandatory Safety Shutdown Procedure laid out in the Safety and Controls and Safety Equipment sections.
  • Operate the lift and tilt controls, drive controls and engine speed control, in either the hand/foot or the dual-hand layout.
  • Check the Maintenance Log and the engine oil, oil filter and oil pressure entries before each shift.
  • Adjust the drive chain with the Adjusting Chain Tension steps, and use the Torque Specifications when hardware needs tightening.
  • Look up the Loader Specifications, Dimensional Specifications and Troubleshooting tables, and read the safety decal sections to identify the ANSI-style and ISO-style decals on the machine.

Who this is for

Dealers and used-machine buyers who need the book to go with a 2056 will use it for the walk-around and handover. Owner-operators and rental fleets can hand it to a new operator for controls, daily checks and attachment mounting.

Keep it in the cab pocket so the next operator has the controls and the Maintenance Log at hand.

Preview of the Mustang 2056 Skid Steer Loader Operator Manual (917402D) (PDF, sample pages)

Does this manual fit your machine?

Mustang model 2056
Machine type Skid Steer Loader
Publication No. 917402 (Rev. D)
Edition date March 2010

Check the model and serial number on your machine’s serial plate before ordering.

What’s inside

  • Troubleshooting: Troubleshooting
  • Torque values: Torque Specifications
  • Maintenance intervals / schedule: Maintenance Log
  • Lubrication, oils, fluids and capacities: Engine Oil; Engine Oil Filter; Engine Oil Pressure
  • Technical specifications: Specifications; Loader Specifications; Dimensional Specifications
  • Adjustments and calibration: Adjustments; Adjusting Chain Tension

How this edition differs

Compared with Mustang 2056 Skid Steer Loader Operator Manual (50950014A):

This manual Other edition
Publication No. 917402D 50950014A
Edition date March 2010 August 2011
Serial numbers – SN 003301 and Up

FAQ

Where do I find the safety decals?
The Safety Decals section has separate parts for ANSI-style and ISO-style decals, inside the ROPS/FOPS and in the engine compartment. Product and Component Plate Locations is a separate heading.

Does it cover the optional equipment?
Yes. The contents include the optional heater, the heater and air conditioner, the two-speed transmission and the Hydraglide ride control system. There are also tips for improving heater performance.

Which section helps with chain tension and service records?
Adjusting Chain Tension is under Adjustments, and the Maintenance Log holds the service schedule and records. Engine oil, filter and pressure are listed as well.

How does this edition differ from 50950014A?
This book is 917402 Rev. D from March 2010. The 50950014A edition is dated August 2011 and is listed for SN 003301 and up.

More books for this machine

📘 Show Index

Table of Contents:

  • Hand/Foot Control
    • Drive Controls
    • Lift/Tilt Controls
  • Dual-Hand Controls
    • Figure 14 Dual-Hand Controls
    • Drive Controls
    • Lift/Tilt Controls
  • Introduction
    • Loader Identification
    • Control/Indicator Symbols
      • Power Off
      • Power On
      • Engine Start
      • Battery Charge
      • Electrical Power
      • Worklight w/Flasher
      • Worklight
      • Safety Alert
      • Hazard Flasher
      • Seatbelt
      • Horn
      • Volume – Full
      • Volume – Half Full
      • Volume – Empty
      • H-L
      • High – Low
      • Neutral
      • Forward
      • Reverse
      • Parking Brake
      • Engine Air Filter
      • Engine Oil
      • Engine Oil Filter
      • Engine Oil Pressure
      • Fuel Filter
      • Engine Temperature
      • Hydraulic System
      • Hydraulic Oil Temperature
      • Hydraulic Oil Filter
      • Grease Lubrication Point
      • Glow Indicator Lamp
      • Diesel Fuel
      • Chaincase Oil
      • Clockwise Rotation
      • Counterclockwise Rotation
      • Fast
      • Slow
      • Ride Control
      • Power Hitch
      • Bucket – Float
      • Bucket – Rollback
      • Bucket – Dump
      • Lift Arm – Lower
      • Lift Arm – Raise
      • Service Hours
      • Lift Point
      • Tie-Down
      • Diesel Water Separator
      • Engine Malfunction Shutdown
  • Safety
    • Mandatory Safety Shutdown Procedure
    • Safety Reminders
    • Potential Hazards
    • Safety Decals
      • New Decal Application
    • ANSI-Style Safety Decals inside the ROPS/FOPS
    • ANSI-Style Safety Decals in the Engine Compartment
    • ISO-Style (used Internationally) Safety Decals inside the ROPS/FOPS
    • ISO-Style (used Internationally) Safety Decals in the Engine Compartment
    • Product and Component Plate Locations
  • Controls and Safety Equipment
    • Guards and Shields
    • Operator Restraint Bar
    • Operator’s Seat
      • Figure 1 Operator’s Seat
    • Upper-Torso Restraint
    • Safety Interlock System
      • Hydraloc™ System
      • Testing the Safety Interlock System
    • ROPS/FOPS
    • Parking Brake
      • Figure 2 Parking Brake Switch
    • Horn
    • Rear Window Emergency Exit
    • Lift Arm Support Device
      • Engagement
        • Figure 3 Lift Arm Support Device Engaged
      • Disengagement
        • Figure 4 Lift Arm Support Device Storage Location
    • Accessory Plug
    • Dome Light
    • Work Lights
    • Heater (optional)
    • Heater and Air Conditioner (optional)
      • Figure 5 Heater/ Air Conditioner Controls
    • Tips For Improving Heater Performance
    • Engine Speed Control
      • Figure 6 Hand Throttle Lever
      • Figure 7 Foot Throttle
    • Two-Speed Transmission (optional)
    • Hydraglide™ Ride Control System (optional)
    • Auto-Shutdown System
    • Attachment Mounting
      • Multi-Tach™ Hitch
        • Figure 8 Multi-Tach™ Hitch
      • Power-A-Tach® Hitch
        • Figure 9 Power-A-Tach® Hitch
    • Instrument Panels
      • Figure 10 Left Panel
      • Left Panel
      • Right Panel
        • Figure 11 Right Panel
    • Joystick Controls
      • Figure 12 Joystick Controls
      • Drive Control
      • Lift/Tilt Control
    • Auxiliary Hydraulic System
      • Standard-Flow Auxiliary Hydraulic Control
        • Figure 16 Dual Joystick Electric Auxiliary Control
        • Figure 17 Hand/Foot Auxiliary Control
      • High-Flow Auxiliary Hydraulic Control (optional)
        • Figure 18 High-Flow Auxiliary Switch
  • Operation
    • Before Starting the Engine
    • Starting the Engine
    • Cold-Starting
    • Cold-Starting Procedure
    • Stopping the Loader
    • Parking the Loader
    • Jump-Starting
    • Changing Attachments
      • Connecting Attachments
        • Figure 19 Manual Hitch – disengaged
        • Figure 20 Power Hitch – disengaged
      • Connecting Auxiliary Hydraulic Couplings
      • Removing an Attachment
    • Self-Leveling
    • Using a Bucket
      • Driving Over Rough Terrain
      • Driving On an Incline
      • Digging with a Bucket
        • Figure 21 Digging
      • Loading a Bucket
        • Figure 22 Loading
      • Dumping the Load Onto a Pile
        • Figure 23 Dumping into a Truck or Hopper
      • Dumping the Load Over an Embankment
      • Scraping with a Bucket
        • Figure 24 Scraping
      • Leveling the Ground
        • Figure 25 Leveling the Ground
    • Vibration Information
    • Vibration Measurement and Actions
      • Vibration Levels
        • Figure 26 Vibration measurement axes
    • Highway Travel
    • Storing the Loader
    • Removing Loader from Storage
    • Transporting the Loader
      • Figure 27 Front Tie-Down/ Retrieval Points
        • Figure 28 Rear Tie-Down/ Retrieval Points
    • Lifting the Loader
      • Figure 29 Single-Point Lift Eye
        • Figure 30 Front Four-Point Lift Eyes
        • Figure 31 Right Rear Four-Point Lift Eye (left same)
  • Service
    • Dealer Services
    • Replacement Parts
    • Loader Raising Procedure
      • Figure 32 Loader Properly Blocked (Tires and wheels removed to show blocks)
    • Loader Lowering Procedure
    • Engine Compartment Access
      • Figure 33 Engine Compartment Access Doors
    • Tilting Back the ROPS/FOPS
      • Figure 34 ROPS/FOPS Lock Mechanism – Engaged
    • Adjustments
      • Control Handles
      • Fuel Sender
      • Engine Speed Control
    • Foreign Material Removal
    • Lubrication
      • Figure 35 Service Locations
    • Chaincases
      • Checking and Adding Oil
        • Figure 36 Fill and Check Plug Location
      • Draining Oil
        • Figure 37 Drain Plug
    • Drive Chains
      • Checking Chain Tension
      • Adjusting Chain Tension
    • Engine Air Cleaner
      • Figure 38 Dual-Element Air Cleaner
      • Changing the Air Cleaner Elements
      • Outer Element
      • Inner Element
      • Reinstallation
    • Engine Service
      • Checking Engine Mounting Hardware
      • Checking Engine Oil Level
        • Figure 39 Engine Service Components
      • Changing Engine Oil and Filter
        • Figure 40 Remote Engine Oil Drain
      • Changing Fuel Filter
    • Hydraulic System
      • Checking Hydraulic Oil Level
        • Figure 41 Sight Gauge and Fill Tube
      • Changing Hydraulic Oil Filter
        • Figure 42 Hydraulic Oil Filter and Indicator
      • Changing Hydraulic Oil
    • Bucket Cutting Edge
    • Alternator/Fan Belt
    • Wheel Nuts
    • Lift Arm Pivots
    • Cooling System
      • Cleaning the Cooling System
    • Tires
      • Checking Tire Pressure
    • Heater Filters
    • Electrical System
      • Circuit Breakers
      • Battery
  • Troubleshooting
  • Maintenance
    • Maintenance Log
  • Specifications
    • Loader Specifications
    • Standard Features
    • Optional Features
    • Dimensional Specifications
      • 14.3 ft.3 (0.4 m3) Bucket w/12 x 16.5 Tires inches mm
    • Capacities and Ratings
      • 2056 Models
        • (186 kg)
        • (218 kg)
        • (200 kg)
        • (172 kg)
        • (227 kg)
        • (227 kg)
        • (227 kg)
    • Common Materials and Densities
    • Bucket Selection
  • Torque Specifications
  • WARRANTY
    • MUSTANG WARRANTY SERVICE INCLUDES
    • MUSTANG WARRANTY DOES NOT INCLUDE
  • INDEX

Mustang PDF Manuals

Related Manuals

0
0
Your Cart
Your cart is emptyReturn to Shop