$ 0
0
$ 0
0

Mustang 270Z and 350Z Compact Excavator Operator Manual (50940102A)

Format: PDF (Printable Document)

File Language: English

File Size: 17.03 MB (Speed Download Link)

Brand: Mustang

Models: 270Z and 350Z

Machine Type: Compact Excavator

Publication No.: 50940102 (Rev. A)

Edition Date: June 2012

Type of Document: Operator Manual (operation, controls, safety and routine maintenance)

Searchable: Yes, text is searchable and copyable

Delivery: Instant download after payment

Categories: ,

$ 40

Share:

Mustang 270Z and 350Z Compact Excavator Operator Manual (50940102A)

Publication 50940102 (Rev. A, June 2012) is the operator manual for the Mustang 270Z and 350Z compact excavators, written in English. It is the book for running these two machines day to day: safety, controls, starting, and the routine care that keeps them working.

A new operator taking over one of these excavators, or a used machine that turned up without its book, is where this manual earns its place. The contents open with an introduction, safety information and a product overview covering intended uses, the break in period and the EPA emission conditions. If you run a 350Z NXT2 with serial numbers 00701 and up, that machine has its own manual, publication 50940260C from July 2018, so check which one matches your machine.

What this manual helps you do

  • Start with the safety chapters, which cover basic precautions, precautions before starting the engine, transportation, towing, the battery and the hooked bucket.
  • Look up where the machine serial number plate, the engine serial number plate and the EPA emission control plate are located before you order parts or call for service.
  • Read the warning label section to find where each safety label sits on the machine.
  • Operate the machine using the descriptions of the monitor, switches, control levers and pedals, and the engine hood, seat and headlight.
  • Check the Maintenance Table for service intervals, including the intervals that apply when you work with the hydraulic breaker, and the nonperiodic services.

Who this is for

Fits the owner-operator or contractor who has a 270Z or 350Z and needs a book for the person in the seat. Rental fleets and used machine buyers can also use it to brief new operators on controls, daily care and torque values.

Match the publication number to your machine, then keep the book where the operator can reach it.

Preview of the Mustang 270Z and 350Z Compact Excavator Operator Manual (50940102A) (PDF, sample pages)

Does this manual fit your machine?

Mustang models 270Z and 350Z
Machine type Compact Excavator
Publication No. 50940102 (Rev. A)
Edition date June 2012

Check the model and serial number on your machine’s serial plate before ordering.

What’s inside

  • Troubleshooting: Troubleshooting; 17-4. Troubleshooting
  • Torque values: 22-2. Torque table
  • Maintenance intervals / schedule: Maintenance Table; 24-2. Service intervals when using the hydraulic breaker; 25-2. Nonperiodic services
  • Technical specifications: SPECIFICATIONS AND DIMENSIONAL DIAGRAMS

How this edition differs

Compared with Mustang 350Z NXT2 Compact Excavator Operator Manual:

This manual Other edition
Publication No. 50940102A 50940260C
Edition date June 2012 July 2018
Serial numbers – Serial Numbers 00701 and Up
Models covered only by 270Z –

FAQ

Where do I find the torque values?
Section 22-2 is the torque table. The specifications and dimensional diagrams are in their own section of the contents.

Which section helps when something goes wrong on the machine?
Open the Troubleshooting chapter, listed as 17-4. It sits alongside the maintenance sections if you need to check intervals too.

Does it say where the serial plates are?
Yes. Sections 5-1, 5-2 and 5-3 give the locations of the machine serial number plate, the engine serial number plate and the EPA emission control plate. Section 5-4 covers ordering replacement parts and service calls.

How does this differ from the 350Z NXT2 manual?
This one is publication 50940102 from June 2012 and covers the 270Z and 350Z. The 350Z NXT2 book is 50940260C from July 2018 for serial numbers 00701 and up.

📘 Show Index

Table of Contents:

  • 1. Introduction
  • 2. Safety Information
  • 3. Product Overview
    • 3-1. Intended uses
    • 3-2. Break in period
    • 3-3. Conditions to insure compliance with EPA emission standards
  • 4. Operation License
    • 5-1. Location of machine serial number plate
    • 5-2. Location of engine serial number plate
    • 5-3. Location of EPA emission control plate
    • 5-4. Ordering replacement parts and service calls
  • SAFETY
  • 7. Basic Precautions
  • 8. Operating Precautions
    • 8-1. Precautions before starting the engine
    • 8-3. Precautions for transportation
    • 8-4. Precautions for the battery
    • 8-5. Precautions for towing
    • 8-6. Precautions for hooked bucket
  • 9. Precautions for Servicing
    • 9-1. Precautions before servicing
    • 9-2. Precautions during servicing
  • 10. Safety Messages (Warning Labels)
    • 10-1. Location of warning labels
  • OPERATION
  • 11. Identification of Important Parts
    • 11-1. Overview of the machine
    • 11-2. Controls and switches
  • 12. Description of Control Devices
    • 12-1. Monitor
    • 12-2. Switch
    • 12-3. Control levers and pedals
    • 12-4. Engine hood B
    • 12-5. Engine hood rear cover
    • 12-7. Windshield (for cabin)
    • 12-8. Operator’s seat
    • 12-9. Ash tray (for cabin)
    • 12-10. Headlight
    • 12-11. Air outlet (for cabin)
    • 12-12. Right window glass (for cabin)
    • 12-13. Cabin side door
    • 12-14. Replenishment of windshield washer fluid
    • 12-15. Fuse
    • 12-16. Power outlet
  • 13. Operating Instructions
    • 13-1. Checking before starting the engine
    • 13-2. Starting up the engine
    • 13-3. Operating and checking instructions after starting the engine
    • 13-4. Traveling
    • 13-5. Steering
    • 13-6. Stopping the machine
    • 13-7. Swinging the upperstructure
    • 13-8. Operating the implements
    • 13-9. Precautions for operating the implement
    • 13-10. Precautions for working
    • 13-12. Escaping from the mud
    • 13-13. Operations using the bucket
    • 13-14. Handling quick coupler
    • 13-15. Parking the machine
    • 13-16. Inspection requirements after completing operation
    • 13-17. Stopping the engine
    • 13-18. Inspection requirements after stopping the engine
    • 13-19. Locking
    • 13-20. Handling the rubber track (for rubber track type)
    • 13-21. Handling hydraulic P.T.O
    • 13-22. Replacing the bucket without the quick coupler
  • 14. Transportation
    • 14-1. Loading and unloading the machine
    • 14-2. Precautions for loading the machine
    • 14-3. Precautions for transporting the machine
    • 14-4. Suspending the machine
  • 15. Care and Service in Cold Weather
    • 15-1. Preparing for cold weather
    • 15-2. Precautions after a day's work
    • 15-3. After cold weather ends
  • 16. Long-term Storage
    • 16-1. Before storing
    • 16-2. Storing
    • 16-3. Using the machine again
  • 17. Troubleshooting
    • 17-1. Phenomena that are not breakdowns
    • 17-2. Towing
    • 17-3. If the battery is overdischarged
    • 17-4. Troubleshooting
  • MAINTENANCE
  • 18. Precautions for Servicing
  • 19. Basic Servicing Practices
    • 19-1. Oils, fuel, and cooling water
    • 19-2. Electrical equipment
    • 19-3. Hydraulic system
  • 20. Consumables
    • 21-1. Fuel and oil
    • 21-2. Cooling water
    • 22-1. Required tools
    • 22-2. Torque table
  • 24. Maintenance Table
    • 24-1. Table of service time intervals
    • 24-2. Service intervals when using the hydraulic breaker
  • 25. Procedures for Maintenance
    • 25-1. First services
    • 25-2. Nonperiodic services
    • 25-3. Checking before start-up
    • 25-4. Maintenance every 50 service hours
    • 25-5. Maintenance every 100 service hours
    • 25-6. Maintenance every 250 service hours
    • 25-7. Maintenance every 500 service hours
    • 25-8. Maintenance every 1000 service hours
    • 25-9. Maintenance every 2000 service hours
  • SPECIFICATIONS AND DIMENSIONAL DIAGRAMS
  • OPTIONAL PARTS AND ATTACHMENTS
  • 27. General Precautions
    • 27-1. Safety precautions
    • 27-2. Precautions for mounting an attachment (implement)
  • 28. Handling the Hooked Bucket
    • 28-1. Checking the hooked bucket for damage
    • 28-2. Prohibitions
    • 28-3. Precautions
  • 29. Optional Parts and Attachments
    • 29-1. Optional parts and attachments
    • 30-2. How to use air conditioner
    • 30-3. Maintenance, inspection and servicing of air conditioner
  • 31. Maintenance Log
  • 32. Notes

Mustang PDF Manuals

Related Manuals

0
0
Your Cart
Your cart is emptyReturn to Shop