$ 0
0
$ 0
0

Mustang 1350R NXT2 and 1500R NXT2 Skid Steer Loader Operator Manual (50950504F)

Format: PDF (Printable Document)

File Language: English

File Size: 44.32 MB (Speed Download Link)

Brand: Mustang

Models: 1350R NXT2 and 1500R NXT2

Machine Type: Skid Steer Loader

Publication No.: 50950504 (Rev. F)

Edition Date: April 2022

Serial No.: 1350R NXT2 SN 188602 and Up; 1500R NXT2 SN 190802 and Up

Type of Document: Operator Manual (operation, controls, safety and routine maintenance)

Searchable: Yes, text is searchable and copyable

Delivery: Instant download after payment

Categories: ,

$ 40

Share:

Mustang 1350R NXT2 and 1500R NXT2 Skid Steer Loader Operator Manual (50950504F)

Most skid steer trouble with a new operator starts at the controls and the safety gear, before any digging happens. This manual for the Mustang 1350R NXT2 and 1500R NXT2 starts there, with Safety, the Mandatory Safety Shutdown Procedure, the Hydraloc safety interlock system and the Control Keypad, then moves on to attachments, daily checks and maintenance.

It is publication 50950504, Rev. F, dated April 2022, in English. It covers the 1350R NXT2 from serial number 188602 and up and the 1500R NXT2 from serial number 190802 and up. Machines with earlier serial numbers belong to the 1350R, 1500R and 1650R manual, 50940264M. Rev. E (50950504E) is dated May 2021, so Rev. F is the April 2022 edition.

What this manual helps you do

  • Start with the Safety chapter: safety decals, the Mandatory Safety Shutdown Procedure, the Hydraloc interlock, the parking brake, ROPS/FOPS, the rear window emergency exit and the lift arm support.
  • Operate the machine from the Indicators and Controls chapter, which covers the Control Keypad, the Information Center Electronic Display, Lift Arm Float and the Hydraglide ride control option.
  • Attach implements with the Attachment Mounting and Auxiliary Hydraulic System sections.
  • Check engine oil level and follow the Maintenance Schedules, then record each service in the Maintenance Log.
  • Look up the Error Codes and the Engine Diagnostic Trouble Codes (DTC) when a warning shows, and use the Troubleshooting sections for the engine, seals and hoses.

Who this is for

Landscape and construction contractors who hand a 1350R NXT2 or 1500R NXT2 to new operators will use it for the safety and controls chapters. Owner-operators and rental fleets keep it for the maintenance schedule, the log and the fault code tables.

Check your serial number plate against the ranges above before you order.

Preview of the Mustang 1350R NXT2 and 1500R NXT2 Skid Steer Loader Operator Manual (50950504F) (PDF, sample pages)

Does this manual fit your machine?

Mustang models 1350R NXT2 and 1500R NXT2
Machine type Skid Steer Loader
Publication No. 50950504 (Rev. F)
Edition date April 2022
Serial numbers 1350R NXT2 SN 188602 and Up; 1500R NXT2 SN 190802 and Up

Check the model and serial number on your machine’s serial plate before ordering.

What’s inside

  • Fault / error codes: Error Codes; Engine Diagnostic Trouble Codes (DTC)
  • Troubleshooting: Troubleshooting; Engine Troubleshooting; Seal and Hose Troubleshooting
  • Maintenance intervals / schedule: Maintenance Schedules; Maintenance Log
  • Lubrication, oils, fluids and capacities: General Lubrication; Checking Engine Oil Level; Changing Engine Oil and Filter
  • Technical specifications: Specifications

How this edition differs

Compared with Mustang 1350R NXT2 and 1500R NXT2 Skid Steer Loader Operator Manual (50950504E):

This manual Other edition
Publication No. 50950504F 50950504E
Edition date April 2022 May 2021

Compared with Mustang 1350R, 1500R and 1650R Skid Steer Loader Operator Manual (50940264M):

This manual Other edition
Publication No. 50950504F 50940264M
Edition date April 2022 May 2021
Serial numbers 1350R NXT2 SN 188602 and Up; 1500R NXT2 SN 190802 and Up 1350R SN 188601 and Before; 1500R SN 190801 and Before
Models covered only by – 1650R

Compared with Mustang 1350R, 1500R and 1650R Skid Steer Loader Operator Manual (50940264N):

This manual Other edition
Publication No. 50950504F 50940264N
Serial numbers 1350R NXT2 SN 188602 and Up; 1500R NXT2 SN 190802 and Up 1350R SN 188601 and Before; 1500R SN 190801 and Before
Models covered only by – 1650R

Compared with Mustang 1350R, 1500R, 1650R and 1900R NXT2 Skid Steer Loader Operator Manual:

This manual Other edition
Publication No. 50950504F 50950612EN-USA
Edition date April 2022 March 2024
Serial numbers 1350R NXT2 SN 188602 and Up; 1500R NXT2 SN 190802 and Up 1350R SN 188601 and Before; 1500R SN 190801 and Before
Models covered only by – 1650R, 1900R

FAQ

Where do I find the safety interlock and the emergency exit?
Both are in the Safety Equipment section, which lists the Safety Interlock System (Hydraloc), the Parking Brake, ROPS/FOPS, the Rear Window Emergency Exit, the Lift Arm Support and the Battery Disconnect Switch.

Which section helps with a warning on the display?
Open the Error Codes and Engine Diagnostic Trouble Codes (DTC) sections. The Information Center Electronic Display is explained in Indicators and Controls.

Does it cover my machine's serial number?
It covers the 1350R NXT2 from SN 188602 and up and the 1500R NXT2 from SN 190802 and up. Earlier 1350R and 1500R machines are in manual 50940264M.

How does this edition differ from 50950504E?
This is Rev. F, dated April 2022. The 50950504E edition is dated May 2021.

More books for this machine

📘 Show Index

Table of Contents:

  • Introduction
    • Safety Symbol and Signal Words
      • Signal Words
    • Contents and Use of this Manual
    • Machine Orientation
    • Proper Machine Use
    • Service and Registration
      • Model and Serial Numbers
    • Fields of Application
      • Using Attachments
    • Vibration Information
    • Fire Extinguisher Location
    • Manufacturer Information
    • Indicator and Operation Symbols
  • Safety
    • Mandatory Safety Shutdown Procedure
    • Safety Reminders
      • Before Starting
      • Additional Safety Equipment
      • During Operation
      • Electrical Energy
      • Maintenance
      • Crystalline Silica Exposure
      • Transporting the Machine
      • Lifting the Machine with a Crane
      • Loading and Transporting the Machine
    • Safety Decals
      • New Decal Application
    • Product and Component Plate Locations
  • SAFETY EQUIPMENT
    • Guards and Shields
    • Operator’s Position
      • Operator’s Seat
      • Seat Belt
      • Upper Torso Restraint (Option)
      • Operator Restraint Bar
    • Safety Interlock System (Hydraloc™)
      • Safety Interlock System Test
    • Parking Brake
    • ROPS/FOPS
    • Rear Window Emergency Exit
    • Lift Arm Support
      • Engage Lift Arm Support
      • Disengage Lift Arm Support
    • Battery Disconnect Switch
  • Indicators and Controls
    • Control Keypad
      • Control Keypad Indicators
      • Control Keypad Buttons
    • Accessory Keypad Indicators/Buttons
    • Optional Lights/Lockout Keypad Indicators/Buttons
    • Information Center Electronic Display
      • Information Center Electronic Display Symbols
      • Information Center Electronic Display Screens
    • Controls
      • Ignition Keyswitch
      • Throttle Controls
      • Travel Drive, Lift and Tilt Controls
        • Drive Control (Left T-Bar)
        • Lift/Tilt Control (Right T-Bar)
        • Drive Control (Left Joystick)
        • Lift/Tilt Control (Right Joystick)
        • Drive Control (Hand Controls)
        • Lift/Tilt Control (Foot Controls)
    • Lift Arm Float
    • Hydraglide™ Ride Control System (Option)
    • Beacon/Position/Work Lights
    • HVAC (Option)
    • Dome Light
    • Accessory Plug
    • Battery Disconnect Switch
    • Attachment Mounting
      • All-Tach® Hitch
      • Power-A-Tach® System
    • Auxiliary Hydraulic System
      • Auxiliary Hydraulic Couplers
      • Auxiliary Hydraulics Control
  • Operation
    • Before Starting the Engine
      • Operational Checks
      • Cab Entry and Exit
    • Starting the Engine
      • Cold-Starting
      • After Starting
      • Warm Up
    • Run-In Period
    • Stopping the Machine
    • Engine Stalling
    • Parking the Machine
    • Brake Release Operation (Option)
    • Jump-starting
    • Travel Drive Operation
      • Two-Speed Drive (Option)
      • Driving on an Incline
      • Driving over Rough Terrain
    • Transport on Public Roads
      • Transport Hydraulics Lock-out (Option)
    • Lift Arm Operation
      • Attachment Transport Position
      • Lift Arm Float
      • Hydraglide™ Ride Control System (Option)
    • Changing Attachments
      • Connecting Attachments
      • Disconnecting Attachments
      • Connecting Auxiliary Hydraulic Couplings
      • Disconnecting Auxiliary Hydraulic Couplings
    • Self-Leveling (Option)
      • Self-Leveling Cancel
    • Using Buckets
      • Digging with a Bucket
      • Loading a Bucket
      • Dumping a Load onto a Pile
      • Loading Trucks (or Hoppers)
      • Backfilling Holes and Embankments
      • Scraping with a Bucket
      • Grading
    • Using Pallet Forks
      • Safety Instructions When Working with Pallet Forks
      • Transporting Loads Using Pallet Forks
    • Loading and Transporting the Machine on a Transport Vehicle
    • Towing
    • Lifting the Machine Using a Crane or Hoist
    • Diesel Particulate Filter (DPF) Regeneration Procedures (DPF Models)
      • Reset Regeneration
      • Stationary Regeneration
      • Forcing Stationary Regeneration
      • DPF Maintenance
    • Camera Observation System
    • Back-Up Alarm
  • Maintenance
    • Maintenance Schedules
    • Maintenance Log
    • General Lubrication
    • Removing Foreign Material
    • Tilting the ROPS/FOPS
      • Raising the ROPS/FOPS
      • Lowering the ROPS/FOPS
    • Lifting the Machine
      • Lowering the Machine
    • Engine Maintenance
      • Engine Access
      • Engine Mounting Hardware Inspection
      • Checking Engine Oil Level
      • Changing Engine Oil and Filter
    • Fuel System Maintenance
      • Adding Fuel
      • Water Separator Maintenance
      • Changing Water Separator Filter
      • Changing Fuel Filter
    • Engine Air Cleaner
      • Changing Air Filter Elements
    • DPF Service (DPF Models)
    • V-Belt Maintenance
    • Cooling System
      • Checking Coolant Level
      • Cleaning Radiator Fins
      • Draining/Flushing Cooling System
    • Hydraulic System
      • Checking Hydraulic Oil Level
      • Changing Hydraulic Oil Filter
      • Changing Hydraulic Oil
      • Hydraulic Hose Maintenance
    • Chaincases
      • Drive Motors
      • Checking and Adding Chaincase Oil
      • Changing Chaincase Oil
      • Drive Chain Tension
    • Seat and Restraint Bar Switches
    • Bucket Cutting Edge
    • Wheel Nuts
    • Tires
      • Mounting Tires
      • Checking Tire Pressure
    • Electrical System
      • Fuses, Relays and Diodes
      • Battery
    • Windshield Washer Reservoir
    • Long-Term Storage
      • Before Storage
      • After Storage
    • Final Shutdown / Decommissioning
      • Before Disposal
      • Machine Disposal
    • Dealer Services
  • Troubleshooting
    • Engine Troubleshooting
    • Indicator Lamp Troubleshooting
    • Seal and Hose Troubleshooting
    • Hydraulic System Troubleshooting
    • Hydrostatic Drive System Troubleshooting
    • Electrical Troubleshooting
    • Error Codes
      • Engine Diagnostic Trouble Codes (DTC)
  • Specifications
    • Fluid Capacities/Lubricants
    • Weights
    • Payloads/Capacities
    • Engine
    • Coolant Compound Mixtures
    • Hydraulics
    • Travel Speeds
    • Electrical System
    • Sound Levels
    • Vibration Levels
    • Dimensions
    • Features
    • Common Materials and Densities
  • Index

Mustang PDF Manuals

Related Manuals

0
0
Your Cart
Your cart is emptyReturn to Shop