Tadano's ATF 110G-5 is an all terrain crane that drives on public roads and works on site with a telescopic boom. This set suits a workshop taking on a used crane that arrived without any paperwork, where you need the full documentation before touching anything. It's one download for one machine, and it covers the ATF 110G-5 model listed in the set.
What this manual set helps you do
- Operate the crane from the chassis and superstructure controls, and follow the safety instructions and maintenance routines in the operator manual (English, German).
- Order the right components from the parts manual, which has exploded views for groups like motor, drive 10×6, transmission assembly and brake cylinder installation (German, English, French).
- Repair and troubleshoot using the service manual, which deals with chassis construction and CAN software functions, including CAN bus pin assignment and rear steering (English).
- Trace circuits and lines with the schematics, 36 files and 389 pages.
- Verify load data and inspection steps with the load charts, inspection forms and the PAT load moment indicator component manuals.
Who this is for
A workshop or service company gets the most from it. You can pull the operator manual for setup and checks, the service manual and diagnostic documents for fault finding, and the parts manual for ordering, all for the same serial number. A rental fleet manager who wants every document of one model in one place will use it the same way.
FAQ
Q: What do I receive and how is it organised?
A: You get 431 files (288 PDF) with 20,146 PDF pages in total, in English, German and French. The operator manual runs 10,558 pages in 14 files, the parts manual 6,765 pages in 5 files, and the service manual 264 pages in 2 files. Schematics, load charts, technical data, service information, training documents, diagnostic documents and software, and other documents come alongside them.
Q: Which machine does it fit?
A: The ATF 110G-5. The serial number printed on the main manual cover is WFN5 RUE P7 520351. The operator manual is titled "ATF 110G-5 Operating Service Maintenance Manual" and the parts manual "ATF 110G-5 Spare Parts List".
Q: How does it help with a used crane that has no paperwork?
A: Everything the crew needs is in one place. Operators get the operating instructions, mechanics get the service manual, schematics and diagnostic documents, and the parts desk gets the spare parts list.
Download it once, hand each person the part they need, and start working on the crane with its documents in hand.
Does this manual fit your machine?
| Model |
Serial No. |
| ATF 110G-5 |
WFN5 RUE P7 520351 |
The serial number shown is the one printed on the manual cover. Check the model and serial number on your machine's data plate before ordering.
📘 Show Index
Table of Contents:
Operator Manual Table of Contents
10,558 pages, 14 files
- Serial No. WFN5 RUE P7 520351 (2,166 pages)
- Front Page
- Table Of Contents From #2035101
- Technical Details
- A1 General technical details (chassis) From # 2035101
- A3 Technical details of components From #2035101
- A-4 Illustration of the vehicle
- Safety Instructions
- B0-1 Requirements and conditions for vehicles used in public road traffic
- B0-2 Instructions for the crane operator From # 2035101
- B0-3 Instruction Sheet for Overload Safety Devices for Boom Cranes (excerpts)
- Operating Instructions Chassis
- B1-1 General instructions concerning operation of the vehicle From # 2035101
- B1-3 FAUN Cockpit Graphic Control System From # 2035101
- B1-4 How to put the machine into operation From # 2035101
- Instrument Panel chassis
- Instrument panel From # 2035101
- Operating Instructions Superstructure
- telescoping
- B2-1 General instructions concerning operation of the vehicle From #2035101
- B2-3 FAUN Cockpit Graphic Control System From # 2035101
- Instrument Panel superstructure
- Service and Maintenance chassis
- C1-2 Maintenance intervals From # 2035101
- Hydraulic system From # 2035101
- Electrical equipment From # 2035101
- Summary of oil types and filling capacities
- Service and Maintenace Superstructure
- C2-1 Maintenance intervals From # 2035101
- C2-4 Swing mechanism
- C2-5 Hoisting gear and auxiliary hoisting gear
- Diagrams Chassis
- D1-1 Electric circuit diagrams From # 2035101
- D1-3 Hydraulic piping diagrams From # 2035101
- Diagrams Superstructure
- D2-1 Electric circuit diagrams From # 2035101
- D2-3 Hydraulic piping diagrams From # 2035101
- Crane testing instructions
- Troubleshooting chassis
- Troubleshooting superstructure
- Troubleshooting Control and Service System
- Connection diagram Chassis
- ZF AS-Tronic Operating instructions
- ZF Intarder Operating instructions
- ZF List of lubricants From # 2035101
- Centralized lubrication system chassis
- Load Moment Limiter
- Centralized lubrication system superstructure
- Air condition heater ventilation
- Manual 1 (1,184 pages)
Same chapters as the edition above (another edition or language of this manual).
- Serial No. WFN5RUEB0D2035474 (1,188 pages)
- General technical details (chassis)
- Details of components (chassis)
- Technical details of components (superstructure)
- Illustration of the vehicle
- Notes referring to the load (lifting capacity) and supporting forces charts
- Safety instructions
- Instructions for the crane operator
- General instructions concerning operation of the vehicle
- Driver's cab
- Cockpit Graphic Control System
- How to put the machine into operation
- Gearshift and driving operation
- Stabilizing the vehicle by outriggers
- Emergency control functions and elements
- Operation in winter
- Steps for access to the superstructure
- Attachments, optional equipment and accessories
- Instrument panel
- Instructions for crane operation
- Manual 4 (16 pages)
- Manual 5 (8 pages)
- Publication 0210_EN_FA035_B2_06_00_00_ab FZ 207 (54 pages)
- Manual 7 (1 pages)
- Publication SLC 019 062 (72 pages)
- Serial No. 520351 (1,193 pages)
Same chapters as the edition above (another edition or language of this manual).
- Serial No. 62035158 (1,148 pages)
Same chapters as the edition above (another edition or language of this manual).
- Serial No. WFN5 RUE P7 520351 (1,321 pages)
- Part A) Technical Details
- General technical details (chassis)
- Dimensions and weights
- Driving performance data (according to DIN 70020)
- Technical details of components (chassis))
- Technical details of components (superstructure)
- Engine
- Hydraulic system
- Hoisting gear
- Illustration of the vehicle
- Notes referring to the load (lifting capacity) and supporting forces charts
- Explanation regarding a load chart
- Supporting forces charts
- Part B.0) Safety Instructions
- Requirements and conditions for vehicles used in public road traffic
- Instructions for the crane operator
- Applications planning
- Steps to be taken before crane operation
- Supporting the crane by outriggers
- Instruction Sheet for Overload Safety Devices for Boom Cranes (excerpts)
- Part B) Operating Instructions – B1) Chassis
- General instructions concerning operation of the vehicle
- Warning and instruction plates in the chassis
- Warning and instruction plates
- Components, assemblies – installation location and position
- Driver's cab
- Explanation of the control elements and of the equipment
- Seat adjustment n
- Adjustment of the steering wheel
- FAUN Cockpit Graphic Control System
- How to put the machine into operation
- Steps to be taken and checks to be made before start-up
- Operation of the electrical equipment of the chassis
- air circulation and air conditioner
- Gearshift and driving operation
- Gearbox
- Transfer box
- Engaging the inter-axle and inter-wheel differential locks
- Outrigger the vehicle
- Control panel
- Preparation for outrigger operation
- Instructions regarding outrigger operation
- Emergency operation
- Operation in winter
- Steps for access to the superstructure
- Attachments, optional equipment and accessories
- Instrument panel – chassis
- Part B) Operating Instructions – B2) Superstructure
- General information
- Warning and instruction plates
- Location of warning and instruction plates
- Components, assemblies – installation location and position
- Crane cabin
- Explanation – control elements
- Adjustment of the seat in the superstructure
- Roller sun visor – skylight
- FAUN-Cockpit-Grafik-Control System
- Gearshift, driving and outrigger operation from the superstructure
- Changing-over to driving from the superstructure
- Starting the engine in the chassis from the superstructure
- Monitoring the air brake system
- Serial No. WFN5RUEB0B2035391 (1,188 pages)
- Operating Manual
- Table of contens
- Preface
- Technical Details
- BO Safety Instructions Chassis
- BO Safesty Superstructure
- B1 Operating Instructions
- Chassis
- B2 Superstructure
- C Service and Maintenance
- Chassis
- Superstructure
- Maintenance intervals
- Engine
- Diesel
- D Circuit diagrams
- Translation
- Chassis
- Superstructure
- E Crane testing instructions
- F Troubleshooting
- Air conditioning and ventilation chassis
- Connection diagramm chassis
- Annex
- ZF Gearbox
- Intarder
- ZF lubricants
- Publication 0210_DE_FA035_B2_06_00_00_ab FZ 207 (1,019 pages)
Parts Manual Table of Contents
6,765 pages, 5 files
- Manual 4 (1,472 pages)
- FAHRGESTELL
- BAUGRUPPENUEBERSICHT
- RAHMEN
- RAHMEN KPL
- KRAN
- BAUGRUPPENUEBERSICHT
- GEGENGEWICHT EINBAU
- GEGENGEWICHT EINBAU ohne 2.Winde
- ANHANG
- WECHSELVENTIL KPL
- RUECKSCHLAGVENTIL
- UEBERSTROEMVENTIL KPL
- CHASSIS
- GENERAL ARRANGEMENT ASSEMBLIES
- FRAME
- FRAME ASSY
- CRANE
- GENERAL ARRANGEMENT ASSEMBLIES
- COUNTERWEIGHT INSTALLATION
- COUNTERWEIGHT INST without 2.winch
- ANNEX
- SHUTTLE VALVE ASSY
- CHECK VALVE
- OVERFLOW VALVE ASSY
- GRUE
- GROUPES ENEMBLES
- CONTREPOIDS INSTALLATION
- CONTREPOIDS INST sans 2.treuil
- ANNEXE
- SOUPAPE CHANGEUR CPL
- SOUPAPE RETENUE
- VALVE DE BARRAGE CPL
- Manual 1 (2,233 pages)
Same chapters as the edition above (another edition or language of this manual).
- Manual 2 (1,696 pages)
Same chapters as the edition above (another edition or language of this manual).
- Manual 3 (1,364 pages)
Same chapters as the edition above (another edition or language of this manual).
Service Manual Table of Contents
264 pages, 2 files
- Publication B.1 (246 pages)
- CMV
- Main Screen
- Selection Menu
- Working Menu
- CGM
- Control Panel
- Start Screen
- Main Menu
- CGC
- Main Screen
- Selection Menu
- Working Menu
- CAN BUS
- CAN Icon in Main Screen
- Error Codes in the CMV
- Error Code Display via Hyper Terminal
- CAN BUS Pin Assignment
- D017 CGM Driver's Side
- D015 CGM Passenger's Side
- CGC Superstructure
- CAN BUS Rear Steering
- Software Download
- Parameter Download
- Steering Potentiometer Reset
- CAN BUS Software Specification Explanation of Functions
- Functions D001/D002 Nodes
- Functions D003/D004 Nodes
- Functions D005/D006 Gate
- Overview
- Layout of Components
- Connection Diagram
- Drivers Cab
- Instrument Panel
- Behind Front Cover
- Electric Components Inside Cab
- Electric System
- Hydraulic System
- Pump
- Priority Valve
- Fan System
- Pneumatic System
- Key for Diagrams
- Assumption in Electrical Circuit Diagrams
- Electrical Circuit
- Electrical Circuit ~#2035110
- Electrical Circuit #2035111~
- Hydraulic Circuit
- Hydraulic System
- Steering
- Motor
- Pneumatic Circuit
- Brake System
- Auxiliary Equipment
- Anti-Lock System
- Publication 99707782385 (18 pages)
- CAN icon in main screen
- Error codes indicated in the CMV colour display
- Error code screen
- Engine error code screen
- Reset “3rd axle: Lift – Lower – Lifted”
- Error code display via Hyper terminal
- Checking the inputs and outputs
- Optionen
- All Outputs
- All Inputs
- CAN DESIGN
- Fuses
Also in this set
- Schematics (36 files, 389 pages)
- Load charts (78 files, 647 pages)
- Technical data (81 files, 331 pages)
- Service information (11 files, 21 pages)
- Assembly and installation (1 file, 1 pages)
- Diagnostic documents and software (53 files, 494 pages)
- Training documents (5 files, 36 pages)
- Inspection forms (5 files, 35 pages)
- Component manuals (19 files, 597 pages)
- PAT IK 350 – 1368 Load Moment Indicator
- PAT iFLEX5 Load Moment Indicator
- Other documents (121 files, 8 pages)
Tadano PDF Manuals
All Crane Manuals
